SB007T03Q Ordering number : ENN4169B SB007T03Q Schottky Barrier Diode (Series Connection) 30V, 70mA Rectifier Applications * * Universal-use rectifiers. High frequency rectification (switching regulators, converters, choppers). Features * * * * * Low forward voltage (VF max=0.55V). Fast reverse recovery time (trr max=10ns). Low switching noise. Low leakage current and high reliability due to highly reliable planar structure. Series connection of 2 elements in an ultrasmall-sized package facilitates high-density mounting and permits SB007T03Q-applied equipment to be made smaller. Absolute Maximum Ratings at Ta=25C Parameter Symbol Repetitive Peak Reverse Voltage Conditions Ratings Unit VRRM VRSM 30 35 V Average Output Current IO 70 mA Surge Forward Current IFSM Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle V 2 A Junction Temperature Tj --55 to +125 C Storage Temperature Tstg --55 to +125 C Electrical Characteristics at Ta=25C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Interterminal Capacitance Reverse Recovery Time Thermal Resistance C trr Rth(j-a) Conditions IR=20A IF=70mA Ratings min typ Unit max 30 VR=15V VR=10V, f=1MHz IF=IR=10mA, See specified Test Circuit. Mounted on a ceramic board (600mm20.8mm) V 0.55 V 5 A 3.0 pF 10 650 ns C / W Marking : N Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71504 TS IM TB-00000592 / 62098 HA (KT) / 12097 GI / 9302 MH (KOTO) 8-7190 No.4169-1/3 SB007T03Q Package Dimensions unit : mm 1246A trr Test Circuit 0.15 1.0mA 10mA 0.3 0.2 0.425 Duty10% 2.1 1.250 0.425 1 2 0.65 0.65 2.0 0.3 50 10s 0 to 0.1 100 10 10mA 3 0.6 0.9 --5V trr 1 : Anode 2 : Cathode 3 : Cathode / Anode SANYO : MCP Electrical Connection 3 1 : Anode 2 : Cathode 3 : Cathode / Anode 1 2 Top view IF -- VF 2 IR -- VR 1000 Reverse Current, IR -- A 75 3 2 25C C 5C 10 7 5 --25C 3 2 Ta= 12 Forward Current, IF -- mA 5 100 7 5 5 100C 2 10 75C 5 2 50C 1.0 5 25C 2 0.1 1.0 7 5 5 2 0.01 0 3 0 0.1 0.2 0.3 0.4 0.6 0.5 Forward Voltage, VF -- V 0.7 5 10 15 Surge Forward Current, IFSM(Peak) -- A 10 7 5 3 2 1.0 7 5 25 30 35 ID00225 IFSM -- t 2.8 f=1MHz 20 Reverse Voltage, VR -- V ID00224 C -- VR 2 Interterminal Capacitance, C -- pF Ta=125C 2 100 Current waveform 50Hz sine wave 2.4 IS 20ms t 2.0 1.6 1.2 0.8 0.4 0 3 5 7 1.0 2 3 5 7 10 Reverse Voltage, VR -- V 2 3 5 ID00226 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00227 No.4169-2/3 SB007T03Q Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2004. Specifications and information herein are subject to change without notice. PS No.4169-3/3