5091 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal Flange with countersunk holes F H 70 C 70 C Flange with through holes special type Approvals and Compliances Description Weblinks - Panel Mount : Screw-on mounting , from front side - 1 Function : pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product - Connector , Pin temperature 70 C , protection class I or II , - Solder, Quick Connect or PCB Terminal Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 4 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 C to 70 C from front side IP 20 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Solder, Quick Connect or PCB Terminal straight PA6, black or grey, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5091 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40010295 UL Approvals UL UL File Number: E57445 CSA Approvals CSA CSA Certification Record: 27324 CSA Approvals CSA CCC File Number: 27324 Connectors 1 5091 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm] 35 26.1 24 15.6 15.8 - 0 +0.2 45 o 2 3. 35 23 Flange with countersunk holes 2 Connectors 4 18.1 +0.2 23.2 - 0 5091 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 44.5 26.3 35 4 24 5.6 0.9 .5 7 o1 .2 o3 7 35 18.2 o10 Flange with through holes special type Config. Code 5091|-|H|-|A|B|C|0-|D|-|E|O| The characters are placeholders for the correspondingly keys of selections from the key tables. 5091|-| H |-|A|B|C|0-|D|-|E|O| = Type Type Terminal Ground Configuration key protection class II B protection class I X Configuration key without terminal 0 solder terminal 1 PCB-terminal standard (additional solder terminal) 4 Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A 5091|-|H|-| A |B|C|0-|D|-|E|O| = Terminals Terminal L 5091|-|H|-|A|B|C|0-| D |-|E|O| = Color Configuration key solder terminal 1 PCB-terminal standard (additional solder terminal) 4 Color Configuration key Black A Grey B 5091|-|H|-|A|B|C|0-|D|-| E |O| = Style Blade terminal (6.3 x 0.8 mm) 9 5091|-|H|-|A| B |C|0-|D|-|E|O| = Terminals Terminal N Configuration key solder terminal 1 PCB-terminal standard (additional solder terminal) 4 Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A 5091|-|H|-|A|B| C |0-|D|-|E|O| = Terminals Style Configuration key flange with countersunk holes 1 flange with through holes 2 flange with through holes (special type) 7 5091|-|H|-|A|B|C|0-|D|-|E| O | = Features Features Configuration key not used 0 dead cover 1 holder for 1 fuse (text legible, when inlet on top) 2 holder for 1 fuse (text legible, when inlet on bottom) 3 holder for 1 or 2 fuses (text legible, when inlet on top) 4 Connectors 3 5091 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Features Configuration key Features Configuration key holder for 1 or 2 fuses (text legible, when inlet on bottom) 5 thermal circuit breaker for rated current 8A C voltage selector with 1 fuse 6 thermal circuit breaker for rated current 10A D voltage selector with 2 fuses 7 thermal circuit breaker for rated current 15A E thermal circuit breaker for rated current 4A A thermal circuit breaker for rated current 20A F thermal circuit breaker for rated current 6A B All Variants Type Terminals L / N Terminal Ground Color Style Features Config. Code protection class I solder terminal solder terminal Grey flange with countersunk holes - 5091-X-1110-B-1 6182.0002 protection class I PCB-terminal standard (additional solder terminal) PCB-terminal standard (additional solder terminal) Black flange with through holes (special type) - 5091-X-4440-A-7 6182.0004 protection class I PCB-terminal standard (additional solder terminal) PCB-terminal standard (additional solder terminal) Grey flange with through holes (special type) - 5091-X-4440-B-7 6182.0005 protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Black flange with countersunk holes - 5091-X-9990-A-1 6182.0006 protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Grey flange with countersunk holes - 5091-X-9990-B-1 6182.0008 The listet variants should be available from stock Other versions on request www.schurter.com/contact Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 100 Pcs Mating Inlets/Plugs Category / Description Appliance Inlet Overview complete 6100-3, Mounting: Screw, Solder terminals or quick connect terminals, Appliance Inlet: IEC C14 6100-3 6100-4, Mounting: Snap-in, Solder terminals or quick connect terminals, Appliance Inlet: IEC C14 6100-4 G-Stecker, Mounting: Appliance Inlet : IEC C14 Without fuse holder 6150 6010, Mounting: Snap-in, Solder, quick-connect, screw, PCB, Appliance Inlet: IEC C14 6010 0711, Mounting: Snap-in, 0.8 mm, Solder, Appliance Inlet: IEC C14 0711 Appliance Inlet further types to 5091 ... Distribution Unit Overview complete Distribution Unit for Snap-in Mounting with 1 IEC Appliance Inlet C14 and 1 Appliance Outlet F 0712 Distribution Unit with 1 IEC Appliance Inlet C14 and 2 Appliance Outlets F, Shuttered 4741 Distribution Unit with 1 IEC Appliance Inlet C14 and 4 Appliance Outlets F 4747 Distribution Unit with 1 IEC Appliance Inlet C14 or Power Cord, 4, 5 or 6 IEC Appliance Outlets F and Extra Components 4740 EMC Power Strip with Line Filter FLBB Distribution Unit further types to 5091 IEC Inlet Filter Overview complete GRF2, Mounting: Rear Side, With EMC-shield and without line filter, 10 A, Plug Connector, Appliance Inlet: IEC C14, Suitable for appliances with protection class I GRF2 5110, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Thermoplastic Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I 5110 KFS, Mounting: Screw, Front Side, Filter: Standard Version, Without fuse holder: 10 A, Appliance Inlet: IEC C14, prewired KFS IEC Inlet Filter further types to 5091 4 Connectors Order Number 5091 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Category / Description Power Entry Module Overview complete DC11, Mounting: Screw, Rocker switch: non-illuminated or illuminated 1 or 2 pole, Quick connect terminals 4.8 x 0.8 mm, Appliance Inlet: IEC C14, Without fuse holder: Suitable for appliances with protection class I or II DC11 KEB1, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Without fuse holder: Rocker switch, non-illuminated or illuminated, red, 1-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I KEB1 KEB2, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Without fuse holder: Rocker switch, non-illuminated or illuminated, 2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I KEB2 DC21, Mounting: Screw Rear Side, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals 4.8 x 0.8 mm Appliance Inlet: IEC C14, Without fuse holder: DC21 DD11, Mounting: Screw-on mounting, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals 4.8 x 0.8 mm, Appliance Inlet: IEC C14, With or without protection cover, Fuse holder: 1 or 2 pole, Suitable for appliances with protection class I DD11 Power Entry Module further types to 5091 ... Power Entry Module with line filter Overview complete KFB1, Mounting: Screw, Front Side, Filter: Standard Version, Without fuse holder: 10 A, Rocker switch: 1-pole, Appliance Inlet: IEC C14, prewired KFB1 KFB2, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Rocker switch: 2-pole, Appliance Inlet: IEC C14, prewired KFB2 DC12, Mounting: Screw, Front-/Rear-Side, Filter, Standard and Medical Version, Without fuse holder:10 A, Rocker switch: 1 or 2 pole, non-illuminated or illuminated Appliance Inlet: IEC C14, prewired DC12 DC22 Mounting: Screw, Rear Side, PCB, 10 A, Filter: Standard and Medical Version, Without fuse holder: Rocker switch: DC22 1 or 2 pole, non-illuminated or illuminated, Appliance Inlet: IEC C14, Suitable for appliances with protection class I DD12 Power Entry Module with line filter further types to 5091 ... 29.11.2017 DD12, Mounting: Screw-on mounting, Front Side, Filter, Standard and Medical Version, Fuse holder:1 or 2 pole, 10 A, Rocker switch: 2-pole, non-illuminated Appliance Inlet: IEC C14, prewired The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 6182.0001 6182.0002 6182.0003 6182.0004 6182.0005 6182.0006 6182.0007 6182.0008