TOSHIBA THS130 TOSHIBA HALL SENSOR GaAs ION IMPLANTED PLANAR TYPE THS130 HIGH STABILITY MOTOR CONTROL. Unit in mm DIGITAL TACHOMETER. C07 C0.25 e High Internal Resistance. : Rg=2k0 (Typ.) * Excellent Temperature Characteristics. 0.6MAx e Wide Operating Temperature Range. (; 55~125C) e Excellent Output Voltage Linearity. + | MAXIMUM RATINGS (Ta = 25C) 5 CHARACTERISTIC SYMBOL | RAITING | UNIT | Leb a Control Voltage Vc 6 Vv [ee sal} | Power Dissipation Pp 150 mW : 1(+) 3() (NPUT) Operating Temperature Toor _55~195 C 2(+) 4() (OUTPUT) Range P C EDE Storage Temperature Range Tstg 55~150 C J EIAJ TOSHIBA 10-4B1A Weight : 0.06g ELECTRICAL CHARACTERISTICS (Ta = 25C) CHARACTERISTIC SYMBOL TEST CONDITION MIN.|TYP.|MAX.| UNIT Internal Resistance (Input) Rq Ic=1mA 1.6 | 2.0 2.4/ ko Residual Voltage Ratio VHOoO/VH | Vc=5V, B=0/B=0.1T |- +10 % Hall Voltage (Note 1)| Vy Vc=5V, B=0.1T 130 | 150} 170} mV Temperature Coefficient Ic=1mA, B=0.1T, T1=25C 3 (Note 2)} VHT | r2=195C = | = [7 8:08) BC Linearity (Note 3)| AKyW Vc=5V, B1=0.05T, B2=0.1T | | 2 % Specific Sensitivity (Note 4)| K* Vo=5V, B=0.1T 30} |x10-7/T Internal Resistance (Output) | Rout | Ic=0.5mA 4.2 | 6.0 7.8 kQ Note 1 : VA=VHM-VHO(VHEM is meter indication) 1 VH (T2) VH(T1) ; : = . x 100 (%/C V : Residual Volt Note 2: VHT Va) TILT (%/C) HO esidual Voltage K -K Vv Note 3 : AKy= (82) S HB) x 109(%) , Ky= = Ky : Product Sensitivity 1/2 {KH (B1) +KH (B2)} Ic-B Note 4 : K*=Vy/(RqXIC XB)=Ky/ Rg 2001-05-31TOSHIBA THS130 VH - VC B=0.1T Ta =25C HALL VOLTAGE Vy (mV) 1 2 3 4 5 6 7 CONTROL VOLTAGE Vc (V) Rq Ta 1 INTERNAL RESISTANCE (INPUT) Rqa (2) -80 -40 0 40 80 120 160 200 AMBIENT TEMPERATURE Ta (C) Vo Ta TA TI HALL VOLTAGE Vy (mV) -80 -40 0 40 80 120 160 200 AMBIENT TEMPERATURE Ta (C) HALL VOLTAGE Vy (mV) INTERNAL RESISTANCE (OUTPUT) Rout (2) 80 VH -B 0.04 0.08 0.12 0.16 0.2 0.24 0.28 MAGNETIC FLUX B (T) Rout Ta 40 0 40 80 120 160 200 AMBIENT TEMPERATURE Ta (C) 2001-05-31TOSHIBA THS130 RESTRICTIONS ON PRODUCT USE 000707EAA @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the Handling Guide for Semiconductor Devices, or TOSHIBA Semiconductor Reliability Handbook etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (Unintended Usage). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 3 2001-05-31