Insertion Return Loss Common Mode
Part Turns 1,2
EMI 5LEDs 3
Loss (dB TYP) Crosstalk Rejection Hipot
Number Ratios Fingers L/R (dB TYP) 100 Ω±15 Ω(dB TYP) (dB TYP) (Vrms)
TX RX L/R 1-65 MHz 1-10 MHz 10-30 MHz 30-60 MHz 60-80 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-50 MHz 50-150 MHz @60Hz 1 MIN
J1006F01P 1CT:1 1CT:1 No G/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1006F21 1CT:1 1CT:1 YES NONE -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1011F01P 1CT:1 1CT:1 No G/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1011F21P 1CT:1 1CT:1 YES G/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1012F01C 1CT:1 1CT:1 No Y/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1012F21C 1CT:1 1CT:1 YES Y/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1012F21K 1CT:1 1CT:1 YES G/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1012F21R 1CT:1 1CT:1 YES RG/RY -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1012F21L 1CT:1 1CT:1 YES RY/RG -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1026F01 1CT:1 1CT:1 No NONE -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1026F01P 1CT:1 1CT:1 No G/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
J1026F21C 1CT:1 1CT:1 YES Y/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
JP006821U 1CT:1 1CT:1 YES G_O/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
JP011821U 1CT:1 1CT:1 YES G_O/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
JP026821U 1CT:1 1CT:1 YES G_O/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
1 J402.A (8/03)
US 619 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Taiwan 886 2 2698 0228
••
Hong Kong 852 2788 6588
••
http://www.pulseeng.com
Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
PULSEJACKTM
1X1 Tab-UP RJ45
www.pulseeng.com
Features and Benefits:
1X1 Tab-UP RJ45 with internal magnetics
8 or 6-pin signal pin versions available
Available with LEDs
Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP
Internal magnetics are 100% electrically tested for HI-POT and functionality
Electrical Performance Summary:
Internal magnetics options available
Meets or exceeds IEEE 802.3 standard for 100Base-T
350 µH minimum OCL with 8 mA bias current
High performance for maximum EMI suppression
Minimum 1500 Vrms isolation per IEEE 802.3 requirement
Description:
10/100 Base-TX RJ45 1X1 Tab-UP with LEDs 8-pin (J1 series) and 6-pin (JP series) integrated magnetics
connector (ICM), designed to support applications, such as SOHO (ADSL modems), LAN-on-Motherboard
(LOM), Hub and Switches.
Notes:
1. Both transmit and receive channels meet IEEE 802.3 specifications.
2. Different electrical and mechanical specifications can be accommodated.
3. LEDs Left/Right: G=green, Y=yellow, G_O=green/orange bi-color,R = LEDs with resistors.
4. J1/JP series platform capable of withstanding 235°C solder reflow.
5. For explanation of EMI fingers, refer to mechanical drawing on page 2.
Notes:
1. All connector part numbers starting with the series prefix JP/J1 comply to the above limits. 2. Connector dimensions comply with FCC dimension requirements.
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
JP/J1 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs.
RJ45 Durability Testing Rating
Part Shield Contact Housing
Number Material Finish Material Plating Area Solder Area Material Specification
JP/J1 10-20m inches Nickel over Phosphor Nickel underplating and 120µ inches Sn90/Pb10
Series Brass 10-20m inches Brass Bronze selective gold plating 15µ inches over 50µ inches nickel Thermoplastic UL 94 V-0
RJ45 Material Specification
.002
0,05
.130
3,30
MAX
1.00
25,4
BACK
FRONT
.290
7,37
.002
0,05
.100
2,54
.002
0,05
SIGNAL LEADS
.130
3,30
.020
0,51
LED
LEADS
.135
3,43
.020
0,51
HOUSING POST
.125
3,18
.020
0,51
.003
0,08
.532
13,51
.250
6,35
.003
0,08
.425
10,80
12 11 10 9
753
8642
PIN #1
4X .003
0,08
.040
1,02
.060
1,52
.290
7,37
8X .003
0,08
.035
0,89
.100
2,54
.150
3,81
.200
5,08
.250
6,35
.300
7,62
.350
8,89
.400
10,16
.485
12,32
.000
0,00
.135
3,43
2X .003
0,08
.064
1,63
.250
6,35
.130
3,30
.000
0,00
.100
2,54
.675
17,15
.050
1,27
.050
1,27
2X .125
3,18 .129
3,28
.040
1,02
.390
9,91
FRONT
BACK
4X R.010
0,25 MAX
(TOP OF PCB
TO BOTTOM
OF OPENING)
.010
0,25
.560
14,22
.670
17,02
.290
7,37
Patent Pending
Date Code
Country of Origin
J10XXXXXX
TM
BACK VIEW
PULSEJACKTM
1X1 Tab-UP RJ45
J402.A (8/03) 2
US 619 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Taiwan 886 2 2698 0228
••
Hong Kong 852 2788 6588
••
http://www.pulseeng.com
J1 Series Mechanicals
RECOMMENDED
PANEL CUTOUT
SUGGESTED PCB LAYOUT
SIDE VIEW
LEFT LED
SHIELD PIN
.150
3,81
.640
16,26
RIGHT LED
FRONT VIEW
FACE VIEW
www.pulseeng.com
Dimensions: Inches Unless otherwise specified, all tolerances are ± .010
mm 0,25
EMI Fingers
EMI Fingers
TD+ 1
CT 3
TD- 2
1 TX+
2 TX-
4
5
7
8
1CT : 1
TRANSMIT
NOTE: Connect CHS GND to PCB ground.
RD+ 7
CT 6
RD- 8
3 RX+
6 RX-
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
4
5
N/C
N/C
J1 Series Electrical Schematics
TD+ 1
CT 3
TD- 2
1 TX+
2 TX-
4
5
7
8
75
75
1CT : 1
TRANSMIT
75
75
NOTE: Connect CHS GND to PCB ground.
RD+ 7
CT 6
RD- 8
3 RX+
6 RX-
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
4
5
C1
0.001 µF
CHS GROUND
J1006
PULSEJACKTM
1X1 Tab-UP RJ45
Yellow 585 nm 2.5 V 2.1 V
Green 565 nm 2.5 V 2.2 V
Standard LED Wavelength Forward* V(MAX) (TYP)
* With a forward current of 20 mA
J1011
TD+ 1
CT 2
TD- 3
RD+ 4
CT 5
RD- 6
8
1 TX+
2 TX-
3 RX+
6 RX-
4
5
7
8
C1
75
75
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
75
75
CABLE SIDE
PCB SIDE TO PHY
CHS GROUND
NOTE: Connect CHS GND to PCB ground.
TD+ 1
CT 3
TD- 2
RD+ 7
CT 6
RD- 8
4
5
1 TX+
2 TX-
3 RX+
6 RX-
4
5
7
8
C1
75
75
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
0.001 µF
75
75
CABLE SIDE
PCB SIDE TO PHY
CHS GROUND
NOTE: Connect CHS GND to PCB ground.
J1012 J1026
LED = C or K
Left LED
Right LED
9
10
12
11
LED = L or R
Right LED
Left LED
10
9
12
11
LED = P
Left LED
Right LED
9
10
12
11
3 J402.A (8/03)
US 619 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Taiwan 886 2 2698 0228
••
Hong Kong 852 2788 6588
••
http://www.pulseeng.com
www.pulseeng.com
PULSEJACKTM
1X1 Tab-UP RJ45
JP Series Mechanicals
J402.A (8/03) 4
US 619 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Taiwan 886 2 2698 0228
••
Hong Kong 852 2788 6588
••
http://www.pulseeng.com
www.pulseeng.com
Dimensions: Inches Unless otherwise specified, all tolerances are ± .010
mm 0,25
EMI Fingers
TD+ 2
CT 1
TD- 3
1 TX+
2 TX-
4
5
7
8
1CT : 1
TRANSMIT
NOTE: Connect CHS GND to PCB ground.
RD+ 4
CT 6
RD- 5
3 RX+
6 RX-
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
JP Series Electrical Schematics
TD+ 2
CT 1
TD- 3
1 TX+
2 TX-
4
5
7
8
75
75
1CT : 1
TRANSMIT
75
75
RD+ 4
CT 6
RD- 5
3 RX+
6 RX-
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
0.001 µF
SHIELD
JP006
PULSEJACKTM
1X1 Tab-UP RJ45
JP011
TD+ 2
CT 1
TD- 3
RD+ 4
CT 6
RD- 5
1 TX+
2 TX-
3 RX+
6 RX-
4
5
7
8
75
75
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
75
75
CABLE SIDE
PCB SIDE TO PHY
NOTE: Connect CHS GND to PCB ground.
SHIELD
0.001 µF
JP026
5 J402.A (8/03)
US 619 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Taiwan 886 2 2698 0228
••
Hong Kong 852 2788 6588
••
http://www.pulseeng.com
www.pulseeng.com
Yellow 585 nm 2.5 V 2.1 - 2.2 V
Green 565 nm 2.5 V 2.1 - 2.2 V
Orange 610 nm 2.5 V 2.1 - 2.2 V
Standard LED Wavelength Forward* V (MAX) (TYP)
* With a forward current of 20 mA
6 J402.A (8/03)
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names metioned herein may be trademarks or registered trademarks of their respective owners.
For More Information :
PULSEJACKTM
1X1 Tab-UP RJ45
Application Notes
Increased Reliability
Pulse developed a patented method for ensuring the quality, consis-
tency, and connection integrity of encapsulated coils and other
three-dimensional electronic components. The InterLock Base con-
sists of an internal plastic carrier that holds the coil firmly in place
and provides precisely engineered “lead-channels” to lock together
the lead wires and the leadframe pins. All of the InterLock Base
interconnections are then simultaneously dip soldered,
providing for both efficiency and uniformity for best common mode
rejection and crosstalk.
Higher Manufacturing Yields
Because of this Pulse patented higher reliability method, there is less of
a chance of opens and shorts, thus providing higher yields.
Consistent Electrical and Magnetic Performance
- With internal magnetics specifically oriented on all parts, there
are more consistent readings on all functional tests. This is opti-
mized for best crosstalk, common mode rejection and return loss.
- With the selection of common mode material and winding
techniques, common mode noise rejection maintains integrity at
higher frequencies.
- Multiple tabs around shield-to-ground, shield-to-chassis,
and shunt noise to ground improves EMI suppression.
Advantages of the PulseJack Modules
Printed on recycled paper. ©2003, Pulse Engineering, Inc.
www.pulseeng.com
UNITED STATES
(Worldwide)
12220 World Trade Drive
San Diego, CA 92128
U.S.A.
http://www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
UNITED KINGDOM
(Northern Europe)
1 & 2 Huxley Road
The Surrey Research Park
Guildford, Surrey GU2 5RE
United Kingdom
TEL: 44 1483 401700
FAX: 44 1483 401701
FRANCE
(Southern Europe)
Zone Industrielle
F-39270
Orgelet
France
TEL: 33 3 84 35 04 04
FAX: 33 3 84 25 46 41
TAIWAN, R.O.C.
(Northern Asia)
3F-4, No. 81, Sec. 1
HsinTai Wu Road
Hsi-Chih, Taipei Hsien
Taiwan, R.O.C.
Tel: 886 2 2698 0228
FAX: 886 2 2698 0948
SINGAPORE
(Southern Asia)
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 6287 8998
FAX: 65 6280 0080
HONG KONG
(China/Hong Kong)
9/F, Phase 2, Tai Sang
Shatin Warehouse Centre
6 Wong Chuk Yeung Street
Fotan, Shatin, Hong Kong
TEL: 852 2788 6588
FAX: 852 2776 1055
DISTRIBUTOR