885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Applications * * * * General Purpose Wireless Wireless Infrastructure 4G Multi-Standard Repeaters SMP-12, 3.00 x 3.00 x 1.22 mm Product Features * * * * * * * * * Functional Block Diagram Usable bandwidth 70 MHz High attenuation Low loss Excellent power handling Matching is required for optimum performance at 50 Small size: 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) Hermetically sealed RoHS compliant, Pb-Free Pb General Description 885009 is a general purpose Uplink filter for band 7. This filter was specifically designed in a 3x3 mm hermetic package for base station applications and is part of our wide portfolio of RF filters in the same package. Gnd 1 6 Gnd Input 2 5 Output Gnd 3 4 Gnd Pin Configuration - Single Ended Pin No. Label 2 Input 5 Output 1,3, 4 6 Ground Low insertion loss, coupled with high attenuation and excellent power handling, makes this filter a natural choice for our customers Uplink RF filtering needs. Ordering Information Part No. Description 885009 885009-EVB Packaged part Evaluation board Standard T/R size = 5000 units/reel Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. - 1 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Electrical Specifications for Matched Conditions (1) Test conditions unless otherwise noted: Parameter (3) (2) Temp= -30 C to +85 C Conditions Typ (4) Max Units At center frequency - 2535 1.3 2.5 MHz dB 2500 - 2570 MHz - 2.2 3.5 dB 2500 - 2570 MHz 70 91.5 - MHz 2570 2489 2580 2500 - MHz 2500 - 2570 MHz - 0.92 1.6 dB p-p 2500 - 2570 MHz - 0.41 1.4 dB p-p 2500 - 2570 MHz (any 5 MHz in passband) - 0.36 0.8 dB p-p Phase Ripple 2500 - 2570 MHz - 36 55 deg dB Group Delay Ripple Absolute Group Delay (8) Temperature Drift EVM (Any 3.84 MHz Channel) 2500 - 2570 MHz 2500 - 2570 MHz 2500 - 2570 MHz 2502.5 - 2567.5 MHz (Tones 5 MHz separated, power > 5 dBm per tone) 70 - 120 MHz 300 - 500 MHz 1784 - 1854 MHz 2110 - 2170 MHz 2321 - 2391 MHz 2620 - 2673 MHZ 2673 - 2695 MHZ 3926 - 4782 MHZ 2500 - 2570 MHz - 14 0.014 0.25 1.2 25 0.02 0.35 2 ns p-p s dB % 44 47 - dBm 25 30 45 34 15 20 30 20 - 56 45 54 41 32 41 40 27 1.5 2.1 - 50 - Center Frequency Insertion Loss Maximum Insertion Loss 3.5 dB Bandwidth (7) Min (7) Lower 3.5 dB Bandwidth (7) Upper 3.5 dB Bandwidth Amplitude Variation Amplitude Ripple (5) (6) IIP3 Stopband Attenuation (7) Input/Output VSWR Source / Load Impedance Notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. (9) single-ended dB All specifications are based on the TriQuint schematic for the main reference design shown on page 4. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. Typical values are based on average measurements at room temperature. Describes the total variation over the defined frequency range. This is a defined as the worst difference between a peak and adjacent valley within defined frequency points. Relative to center frequency. Temperature drift specification is defined on page 4 and is guaranteed by design and won't be measured in production. This is the optimum impedance in order to achieve the performance shown. Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. - 2 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Electrical Specifications for Matched Conditions (1) Test conditions unless otherwise noted: Parameter (3) (2) Temp= -40 C to +85 C Conditions Typ (4) Max Units At center frequency - 2535 1.3 2.75 MHz dB 2500 - 2570 MHz - 2.2 3.75 dB 2500 - 2570 MHz 70 92.2 - MHz 2570 2489 2580 2500 - MHz 2500 - 2570 MHz - 0.92 1.7 dB p-p 2500 - 2570 MHz - 0.41 1.5 dB p-p 2500 - 2570 MHz (any 5 MHz in passband) - 0.36 0.9 dB p-p Phase Ripple 2500 - 2570 MHz - 36 60 deg dB Group Delay Ripple Absolute Group Delay (8) Temperature Drift EVM (Any 3.84 MHz Channel) 2500 - 2570 MHz 2500 - 2570 MHz 2500 - 2570 MHz 2502.5 - 2567.5 MHz (Tones 5 MHz separated, power > 5 dBm per tone) 70 - 120 MHz 300 - 500 MHz 1784 - 1854 MHz 2110 - 2170 MHz 2321 - 2391 MHz 2620 - 2673 MHZ 2673 - 2695 MHZ 3926 - 4782 MHZ 2500 - 2570 MHz - 14 0.014 0.25 1.2 30 0.02 0.38 2.2 ns p-p s dB % 44 47 - dBm 25 30 45 34 15 20 30 20 - 56 45 54 41 32 41 40 27 1.5 2.1 - 50 - Center Frequency Insertion Loss Maximum Insertion Loss 3.5 dB Bandwidth (7) Min (7) Lower 3.5 dB Bandwidth (7) Upper 3.5 dB Bandwidth Amplitude Variation Amplitude Ripple (5) (6) IIP3 Stopband Attenuation (7) Input/Output VSWR Source / Load Impedance Notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. (9) single-ended dB All specifications are based on the TriQuint schematic for the main reference design shown on page 4. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. Typical values are based on average measurements at room temperature. Describes the total variation over the defined frequency range. This is a defined as the worst difference between a peak and adjacent valley within defined frequency points. Relative to center frequency. Temperature drift specification is defined on page 4 and is guaranteed by design and won't be measured in production. This is the optimum impedance in order to achieve the performance shown. Temperature Drift Equations: max(T - T Temp Drift = Temp Drift = ) - min(T - T 2 ) max(T - T ! ) - min(T - T ! ) 2 Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. Temperature Drift Terms Defined: T - Transmission power in dB measured at +25 degrees C. T - Transmission power in dB measured at +85 degrees C. T ! - Transmission power in dB measured at -40 degrees C. Temperature Drift - Greater of Temp Drift vs Temp Drift - 3 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Evaluation Board 2.2nH 2.2nH 2 L1 5 L2 EX JJJYM 50 C2 C1 0.5pF 0.4pF 50 1,3,4,6 960700 Notes: 1. No impedance matching required. 2. Top, middle & bottom layers: 1 oz. copper. Substrates: FR4 dielectric 031" thick. Finish plating: Nickel: 3-8 m thick, Gold: 0.03 0.2 m thick. Hole plating: Copper min .0008 m thick. Bill of Material Reference Des. Value Description Manuf. Part Number 2535 MHz SAW filter TriQuint 885009 U1 - L1 2.2nH Coil Wire-wound, 0402, 5% Murata LQW15AN2N2J00 L2 2.2nH Coil Wire-wound, 0402, 5% Murata LQW15AN2N2J00 C1 0.4pF Chip Capacitor, 0402, 5% Murata GRM1555C1HR40WA01 C2 0.5pF Chip Capacitor, 0402, 5% Murata GRM1555C1HR50WA01 SMA - SMA connector Radiall 9602-1111-018 PCB - 3-Layer TriQuint 960700 PCB Mounting Pattern 3.20 SQ Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. .96 1.70 1.27 .81 .38 Absolute Maximum Ratings Parameter Rating Storage Temperature (1) OperableTemperature RF Input Power (2) (3)(4) Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. -40 to +125 C -40 to +125 C +30 dBm Notes: 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Specifications are not guaranteed over all operating conditions. 3. Input Power is targeted for an applied CW modulated RF signal at 55 C for 10,000 hrs. 4. Sustains an instantaneous +35 dBm signal without decay. - 4 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Electrical Specifications for Unmatched Conditions (1) Test conditions unless otherwise noted: Parameter (3) (2) Temp= -30 C to +85 C Conditions Typ (4) Max Units At center frequency - 2535 1.9 2.75 MHz dB 2500 - 2570 MHz - 2.4 3.5 dB 2500 - 2570 MHz 70 93.2 - MHz 2570 2489 2582 2500 - MHz 2500 - 2570 MHz - 1.05 1.8 dB p-p 2500 - 2570 MHz - 0.5 1.5 dB p-p 2500 - 2570 MHz (any 5 MHz in passband) - 0.4 0.9 dB p-p Phase Ripple 2500 - 2570 MHz - 36 65 deg dB Group Delay Ripple Absolute Group Delay EVM (Any 3.84 MHz Channel) 2500 - 2570 MHz 2500 - 2570 MHz 2502.5 - 2567.5 MHz (Tones 5 MHz separated, power > 5 dBm per tone) 70 - 120 MHz 300 - 500 MHz 1784 - 1854 MHz 2110 - 2170 MHz 2321 - 2391 MHz 2391 - 2465 MHZ 2620 - 2673 MHZ 2673 - 2695 MHZ 2695 - 5000 MHz - 14 0.014 1.3 30 0.02 2.5 ns p-p s % 44 47 - dBm 25 30 45 34 15 20 20 30 20 56 44 54 42 33 41 40 27 25 - dB 2500 - 2570 MHz - 2.4 - - single-ended - 50 - Center Frequency Insertion Loss Maximum Insertion Loss 3.5 dB Bandwidth (7) Min (7) Lower 3.5 dB Bandwidth (7) Upper 3.5 dB Bandwidth Amplitude Variation Amplitude Ripple (5) (6) IIP3 Stopband Attenuation (7) Input/Output VSWR Source / Load Impedance Notes: 1. 2. 3. 4. 5. 6. 7. 8. (8) All specifications are based on the TriQuint schematic for the main reference design shown below. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. Typical values are based on average measurements at room temperature. Describes the total variation over the defined frequency range. This is a defined as the worst difference between a peak and adjacent valley within defined frequency points. Relative to center frequency. This is the optimum impedance in order to achieve the performance shown. 2 1,3,4,6 50 50 Single-ended Output XX 50 5 JJJYM 50 Single-ended Input 960700 Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. - 5 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Performance Plots - Evaluation Board (matched) Test conditions unless otherwise noted: Temp= +25 C Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. - 6 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Performance Plots - Evaluation Board (unmatched) Test conditions unless otherwise noted: Temp= +25 C Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. - 7 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Package Information, Marking and Dimensions Marking code TriQuint logo EX ID dot Date code JJJYM Package Style: SMP-12A Body: Al2O3 ceramic. Lid: Kovar, Ni plated. Terminations: Au plating 0.5 - 1.0 m, over a 2-6 m Ni plating. The date code consists of: day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code. 1.22 NOM. 1.32 MAX. 0.69 Notes: 1. 2. 3.00 3. 0.75 All dimensions shown are typical in millimeters. All tolerances are 0.15 mm except overall length and width 0.10 mm. An asterisk (*) in front of the marking code indicates prototype. 1.50 3.00 0.75 0.60 Tape and Reel information Standard T/R size = 5000 units/reel. All dimensions are in millimeters 2.7 12.8 ID dot O330 TriQuint logo Section A-A 4.0 0.21 2.0 O1.5 A 1.75 5.5 O102 O20.2 O13.0 2.0 Direction of travel 12.0 3.25 1.4 3.25 4.0 A O1.5 Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. - 8 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885009 2535 MHz BAW Filter RFMD + TriQuint = Qorvo Product Compliance Information ESD Sensitivity Ratings Caution! ESD-Sensitive Device ESD Rating: Class 0 Test: Human Body Model (HBM) Standard: ESDA/JEDEC JS-001 ESD Rating: Class A Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Not applicable. Hermetic package. Solderability Compatible with both lead-free (260C maximum reflow temperature) and tin/lead (245C maximum reflow temperature) soldering processes. Refer to guidelines. Soldering Profile for recommended RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: * Lead Free * Halogen Free (Chlorine, Bromine) * Antimony Free * TBBP-A (C15H12Br402) Free * PFOS Free * SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.triquint.com Email: customer.support@qorvo.com Tel: 877-800-8584 For information about the merger of RFMD and TriQuint as Qorvo: Web: www.qorvo.com For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev E 04-28-15 (c) 2015 TriQuint Semiconductor, Inc. - 9 of 9 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com