NAC3MPB-1-WOT Chassis connector, power-out, 3/16'' flat tab terminals, grey, without insulation divider The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. NAC3MPA-1 NAC3MPA-1-WOT Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live! Features & Benefits * Locking 20 A / 250 V ac appliance coupler * 3 contacts for line, neutral and premating safety * Power-in (blue) and power-out (grey) versions with * Fast and easy twist lock latching system * Extremely robust and reliable * Ergonomic design * User friendly latch design for easy handling * UL, cUL recognized components * Branded with unique hologram - guarantees genuine different keying to avoid the possibility of intermating ground VDE certified and authentic Neutrik product NAC3MPB-1-WOT 1/2 Technical Information Product Title NAC3MPB-1-WOT Type Chassis Gender male Electrical Contact resistance 3 m Dielectric strength 4 kVdc / 2.8 kVac Insulation resistance > 0.1 G (after damp heat test IEC 68-2-30) Number of electronical contacts 2 + PE Rated current per contact 20 A rms Rated voltage 250 V ac Mechanical Lifetime > 1000 mating cycles Wiresize Locking device Quick Lock Mounting direction Front mounting Chassis shape D Material Contact plating 2 m Ag Locking element Steel Ck67 Shell Polyamide (PA 6 30 % GR) Contacts Bronze (CuNi1Si0.2) Environmental Flammability UL 94 V-0 Temperature range -30 C to +80 C NAC3MPB-1-WOT 2/2