SPECIFICATION CONTROL DRAWING
Raychem THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE DEVICE*, SHIELD
TERMINATION-LOW TEMPERATURE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO. B-050-00/01/02
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D980625 REPLACES:
B0500X
DRAWN BY:
M. FORONDA DATE:
06/15/98 PROD. REV.
SEE TABLE DOC ISSUE:
1 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product Name L
max øA
min øB
min øC
max øD
min øE
max øF
min G±1.0 H±1.0
B-050-00 D 55.0 17.0 19.0 18.0 9.0 16.0 8.0 23.0 21.0
B-050-01 E 80.0 22.5 24.5 23.5 12.0 21.5 11.0 31.0 29.0
B-050-02 D 80.0 33.0 35.0 34.0 19.0 32.0 17.5 31.0 29.0
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. Color: clear.
APPLICATION
1. These controlled soldering devices will terminate a ground wire to the tin-plated or bare copper shield of an electrical cable whose
insulation is rated for at least 105°C or higher.
2. Temperature range: -55°C to +125°C. For application tooling, consult your local Raychem technical service.
For best results, prepare the cable as shown:
* A trademark of Raychem Corpor ation.
