SPECIFICATION CONTROL DRAWING Product Revision Product Name B-050-00 B-050-01 B-050-02 D E D Product Dimensions L oA oB max min min 55.0 17.0 19.0 80.0 22.5 24.5 80.0 33.0 35.0 oC max 18.0 23.5 34.0 oD min 9.0 12.0 19.0 Cable Dimensions oE oF max min 16.0 8.0 21.5 11.0 32.0 17.5 G1.0 H1.0 23.0 31.0 31.0 21.0 29.0 29.0 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. Color: clear. APPLICATION 1. These controlled soldering devices will terminate a ground wire to the tin-plated or bare copper shield of an electrical cable whose insulation is rated for at least 105C or higher. 2. Temperature range: -55C to +125C. For application tooling, consult your local Raychem technical service. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A ANGLES: N/A ROUGHNESS IN MICRON Raychem reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. TITLE: SOLDERSLEEVE DEVICE*, SHIELD TERMINATION-LOW TEMPERATURE DOCUMENT NO. B-050-00/01/02 DCR NUMBER: REPLACES: D980625 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 06/15/98 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None B0500X SIZE: A SHEET: 1 of 1