DATA SHEET PHOTOCOUPLER PS2505-1,-2,-4,PS2505L-1,-2,-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES -NEPOC Series- DESCRIPTION The PS2505-1, -2, -4 and PS2505L-1, -2, -4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2505-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2505L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES PIN CONNECTION * AC input response (Top View) * High isolation voltage (BV = 5 000 Vr.m.s.) * High collector to emitter voltage (VCEO = 80 V) PS2505-1, PS2505L-1 4 * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) 3 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector * Ordering number of tape product: PS2505L-1-E3, E4, F3, F4, PS2505L-2-E3, E4 * Safety standards 1 * UL approved: File No. E72422 2 PS2505-2, PS2505L-2 8 APPLICATIONS 7 6 5 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector * Power supply * Telephone/FAX. 1 * FA/OA equipment * Programmable logic controller 2 3 4 PS2505-4, PS2505L-4 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PN10228EJ02V0DS (2nd edition) Date Published March 2006 CP(K) Printed in Japan The mark shows major revised points. NEC Compound Semiconductor Devices, Ltd. 1988, 2006 PS2505-1,-2,-4,PS2505L-1,-2,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type (New package) PS2505-1 PS2505-4 4.60.35 6.50.5 6.50.5 19.80.5 0 to 15 +0.1 0.25 -0.05 1.250.15 3.50.3 3.20.4 4.150.4 7.62 3.50.3 3.20.4 4.150.4 7.62 0.500.10 1.250.15 0.500.10 0.25 M 0 to 15 +0.1 0.25 -0.05 0.25 M 2.54 2.54 Caution New package 1-ch, 4-ch only DIP Type PS2505-2 PS2505-1 4.60.5 6.50.5 6.50.5 9.70.5 7.62 0 to 15 +0.1 0.25 -0.05 1.250.15 3.50.3 3.30.5 4.150.4 3.50.3 3.30.5 4.150.4 7.62 0.500.10 1.250.15 0.500.10 0.25 M 0.25 M 2.54 2.54 PS2505-4 6.50.5 19.80.5 3.50.3 3.30.5 4.150.4 7.62 0.500.10 1.250.15 2.54 2 0.25 M Data Sheet PN10228EJ02V0DS 0 to 15 +0.1 0.25 -0.05 0 to 15 +0.1 0.25 -0.05 PS2505-1,-2,-4,PS2505L-1,-2,-4 Lead Bending Type (New package) PS2505L-1 PS2505L-4 4.60.35 0.90.25 9.600.4 1.250.15 0.25 M 2.54 1.250.15 0.25 M 0.15 2.54 0.1 +0.1 -0.05 0.25 +0.1 -0.05 3.50.3 0.1 +0.1 -0.05 3.50.3 0.25 +0.1 -0.05 6.50.5 6.50.5 19.80.5 0.90.25 9.600.4 0.15 Caution New package 1-ch, 4-ch only Lead Bending Type PS2505L-2 PS2505L-1 4.60.5 0.90.25 9.600.4 1.250.15 0.25 M 0.25 M 2.54 0.1 +0.1 -0.05 0.90.25 9.600.4 1.250.15 0.15 0.15 PS2505L-4 1.250.15 0.25 M 2.54 0.15 Data Sheet PN10228EJ02V0DS 0.1 +0.1 -0.05 0.25 +0.1 -0.05 6.50.5 19.80.5 3.50.3 2.54 0.25 +0.1 -0.05 3.50.3 0.1 +0.1 -0.05 3.50.3 0.25 +0.1 -0.05 6.50.5 6.50.5 9.70.5 0.90.25 9.600.4 3 PS2505-1,-2,-4,PS2505L-1,-2,-4 MARKING EXAMPLE PS2505-1 PS2505-2, -4 No. 1 pin Mark No. 1 pin Mark 2505 NL601 N L Assembly Lot 6 01 N Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan L J N K L 6 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG *1 PS2505-4 only 4 Data Sheet PN10228EJ02V0DS Country Assembled Type Number Assembly Lot PS2505-2 NL601 Made in Japan Made in Taiwan L *1 J N PS2505-1,-2,-4,PS2505L-1,-2,-4 ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number Specification PS2505-1 PS2505-1-A Pb-Free PS2505L-1 PS2505L-1-A PS2505L-1-E3 PS2505L-1-E3-A PS2505L-1-E4 PS2505L-1-E4-A PS2505L-1-F3 PS2505L-1-F3-A PS2505L-1-F4 PS2505L-1-F4-A PS2505-2 PS2505-2-A PS2505L-2 PS2505L-2-A PS2505L-2-E3 PS2505L-2-E3-A PS2505L-2-E4 PS2505L-2-E4-A PS2505-4 PS2505-4-A PS2505L-4 PS2505L-4-A Magazine case 100 pcs Standard products *1 PS2505-1 (UL Approved) Embossed Tape 1 000 pcs/reel Embossed Tape 2 000 pcs/reel Magazine case 45 pcs PS2505-2 Embossed Tape 1 000 pcs/reel Magazine case 20 pcs PS2505-4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Ratings Parameter Diode Symbol Forward Current (DC) PS2505-2,-4 PS2505L-2,-4 80 IF Power Dissipation Derating Power Dissipation Unit mA/ch PD/C 1.5 1.2 mW/C PD 150 120 mW/ch IFP 1 A/ch Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 7 V IC 50 mA/ch *1 Peak Forward Current Transistor PS2505-1, PS2505L-1 Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 PC/C 1.5 1.2 mW/C PC 150 120 mW/ch BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output Pins 1-2 shorted together, 3-4 shorted together (PS2505-1, PS2505L-1). Pins 1-4 shorted together, 5-8 shorted together (PS2505-2, PS2505L-2). Pins 1-8 shorted together, 9-16 shorted together (PS2505-4, PS2505L-4). Data Sheet PN10228EJ02V0DS 5 PS2505-1,-2,-4,PS2505L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Transistor Symbol Conditions MIN. TYP. MAX. Unit 1.4 V Forward Voltage VF IF = 10 mA 1.17 Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 100 ICEO VCE = 80 V, IF = 0 mA CTR IF = 5 mA, VCE = 5 V 80 CTR1/ IF = 5 mA, VCE = 5 V 0.3 Collector to Emitter Dark pF 100 nA 300 600 % 1.0 3.0 Current Coupled Current Transfer Ratio (IC/IF) CTR Ratio *1 CTR2 Collector Saturation VCE(sat) IF = 10 mA, IC = 2 mA 0.3 V Voltage Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 Rise Time tr *2 tf Fall Time VCC = 10 V, IC = 2 mA, RL = 100 IC1 VCE IC2 IF2 *2 Test circuit for switching time Pulse Input IF VCC PW = 100 s Duty Cycle = 1/10 50 6 11 0.5 pF 3 s 5 *1 CTR1 = IC1/IF1, CTR2 = IC2/IF2 IF1 10 VOUT RL = 100 Data Sheet PN10228EJ02V0DS PS2505-1,-2,-4,PS2505L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 PS2505-1 PS2505L-1 100 PS2505-2 PS2505L-2 PS2505-4 PS2505L-4 1.5 mW/C 50 1.2 mW/C 0 25 50 75 100 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 125 150 PS2505-1 PS2505L-1 100 PS2505-2 PS2505L-2 PS2505-4 PS2505L-4 50 1.2 mW/C 0 150 25 100 125 150 FORWARD CURRENT vs. FORWARD VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 80 50 60 TA = +100 C +60 C +25 C Forward Current IF (mA) Forward Current IF (mA) 75 50 Ambient Temperature TA (C) Ambient Temperature TA (C) 10 5 0 C -25 C -55 C 1 0.5 40 20 0 -20 -40 -60 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 -80 1.5 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 Forward Voltage VF (V) Forward Voltage VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 50 mA 20 mA 10 mA 10 000 VCE = 80 V 40 V 24 V 10 V 5V 1 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 1.5 mW/C 100 10 1 - 50 -25 0 25 50 75 100 10 2 mA IF = 1 mA 1 0.5 0.1 0 Ambient Temperature TA (C) Remark 5 mA 5 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) The graphs indicate nominal characteristics. Data Sheet PN10228EJ02V0DS 7 PS2505-1,-2,-4,PS2505L-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Normalized Current Transfer Ratio CTR 70 Collector Current IC (mA) 60 50 40 50 30 mA 20 mA A m 10 20 IF = 5 mA 10 0 4 2 8 6 10 ;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;; 1.0;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;; 0.8;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;; 0.6 1.2 0.4 0 -50 -25 0 25 50 75 Collector to Emitter Voltage VCE (V) Ambient Temperature TA (C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT SWITCHING TIME vs. LOAD RESISTANCE 1 000 450 350 Switching Time t ( s) 400 Sample A B C D 300 250 200 150 100 ts 100 10 tr 50 0 100 tf IF = 5 mA, VCC = 5 V, CTR = 290 % VCE = 5 V Current Transfer Ratio CTR (%) Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 0.2 0.05 0.1 0.5 1 5 10 1 100 50 td 500 1 k Forward Current IF (mA) 5 k 10 k 50 k 100 k Load Resistance RL () SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 50 tf tr IF = 5 mA, VCE = 5 V 0 10 Normalized Gain GV Switching Time t ( s) IC = 2 mA, VCC = 10 V, CTR = 290 % td ts 1 -5 -10 100 -15 RL = 1 k -20 0.1 10 300 50 100 500 1 k 5 k 10 k 0.5 1 Load Resistance RL () Remark 8 2 5 10 20 50 100 200 500 Frequency f (kHz) The graphs indicate nominal characteristics. Data Sheet PN10228EJ02V0DS PS2505-1,-2,-4,PS2505L-1,-2,-4 LONG TERM CTR DEGRADATION 1.2 IF = 5 mA CTR (Relative Value) 1.0 0.8 TA = 25 C 0.6 TA = 60 C 0.4 0.2 0 102 103 104 105 Time (Hr) Remark The graph indicates nominal characteristics. Data Sheet PN10228EJ02V0DS 9 PS2505-1,-2,-4,PS2505L-1,-2,-4 TAPING SPECIFICATIONS (UNIT : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2505L-1-E3 PS2505L-1-E4 Outline and Dimensions (Reel) 2.00.5 21.00.8 80.01.0 R 1.0 2542.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel 10 Data Sheet PN10228EJ02V0DS 15.9 to 19.4 Outer edge of flange PS2505-1,-2,-4,PS2505L-1,-2,-4 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2505L-1-F3 PS2505L-1-F4 Outline and Dimensions (Reel) 2.00.5 21.00.8 1001.0 R 1.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 2 000 pcs/reel Data Sheet PN10228EJ02V0DS 15.9 to 19.4 Outer edge of flange 11 PS2505-1,-2,-4,PS2505L-1,-2,-4 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS2505L-2-E4 PS2505L-2-E3 Outline and Dimensions (Reel) R 1.0 1001.0 2.00.5 13.00.2 3302.0 2.00.5 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel 12 Data Sheet PN10228EJ02V0DS 15.9 to 19.4 Outer edge of flange PS2505-1,-2,-4,PS2505L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. Data Sheet PN10228EJ02V0DS 13 PS2505-1,-2,-4,PS2505L-1,-2,-4 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 14 Data Sheet PN10228EJ02V0DS PS2505-1,-2,-4,PS2505L-1,-2,-4 When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. * The information in this document is current as of March, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Data Sheet PN10228EJ02V0DS 15 PS2505-1,-2,-4,PS2505L-1,-2,-4 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1573 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0504