NMOS multichannel detector head
C8892
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K.
•Video data rate is 1/6 of master clock
frequency (62.5 kHz Max.).
•The operation of circuit stroke length below
4.5 mm is recommended.
•The relation between data video output
voltage and output charges from NMOS
image sensor can be expressed by the
following formula.
Note) Amplifier saturation voltage is 10 V.
Vout (V) = 3 ×Output charge
10 × 10-12[F]
■ Dimensional outline (unit: mm)
Te r m i n al N o .
Terminal name Description
1 NC No connection
2Data video Analog video signal output; positive polarity
3 +15 V Positive power supply (25 mA)
4-15 V Negative power supply (15 mA)
5 NC No connection
6Start
Digital input signal for initializing the circuit; positive
logic. Interval of these pulses equals the integration
time of the sensor
7CLK
Digital input signal for operating the circuit at the
rising edge
8EOS Digital output signal indicating end of scan,
negative logic
9 A. GND Analog ground
10 A. GND Analog ground
11 Shield Case shield
12 D. GND Digital ground
13 D. GND Digital ground
14 D. GND Digital ground
15 Trigger Digital output signal for A/D conversion; positive
logic
1
2345678
9101112
131415
KACCA0113EA
KACCC0069EA
■ Pin assignment of "Signal I/O" connector (15-pin D-sub socket type)
Cat. No. KACC1073E01
Apr. 2002 DN
4
78PCD
(4 ×) 3.3
NMOS LINEAR IMAGE SENSOR
(OPTIONAL)
PC-BOARD
FLANGE
33.0
45˚
2.0
FOCAL ADJUSTER DIAL
SIGNAL
CONNECTOR
HOUSING CASE
(INCLUDING FLANGE)
OFFSET
ADJUSTER
TRIMMER
WEIGHT: approx. 0.16 kg
FRONT VIEW SIDE VIEW REAR VIEW
The focal position can be adjusted backward
within the range from 0 to 4.5 mm (circuit
stroke length) with a focal adjustment dial.
72.0
86.0