222237570622 - BC Components

DATA SH EET

Product speciﬁcation

Supersedes data of March 1998

File under BC Components, BC05

1999 Apr 29

BC COMPONENTS

KP/MKP 375

AC and pulse

metallized polypropylene film

capacitors

1999 Apr 29 2

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm KP/MKP 375

KP/MKP RADIAL LACQUERED TYPE PITCH 10/15/22.5/27.5 mm

PITCH 7.5 mm (bent back leads)

Fig.1 Simplified outline.

296x12(full_width)

P = 10 mm P = 15 - 22.5 -27.5 mm

CBA951

P(bent back leads) = 7.5 mm

FEATURES

•10 to 27.5 mm lead pitch

•Supplied loose and taped

•Taped products available on

request.

APPLICATIONS

•Where high currents and steep

pulses occur

•For deflection circuits in television

receivers.

DETAIL SPECIFICATION

For more detailed data and test

requirements see

“Type detail

specification HQN-384-17/104”

QUICK REFERENCE DATA

DESCRIPTION VALUE

Capacitance range (E24 series) 100 pF to 270 nF

Capacitance tolerance ±5%; ±3.5%

Rated (DC) voltage 630 V; 1000 V; 1600 V; 2000 V; 2500 V

Rated (AC) voltage 300 V; 400 V; 500 V; 600 V; 880 V

Rated peak-to-peak voltage 850 V; 1100 V; 1400 V; 1700 V; 2500 V

Climatic category 55/105/56

Maximum application

temperature 105 °C

Rated temperature 85 °C

Reference speciﬁcation IEC 60384-17

Performance grade:

for C >5.6 nF and 2500 V grade 1 (long life)

for C ≤5.6 nF grade 2 (general purpose)

Stability grade grade 2

1999 Apr 29 3

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

COMPOSITION OF CATALOGUE NUMBER

TYPE PACKAGING LEAD CONFIGURATION C-TOL 630 V 1000 V 1600 V 1600 V

monitor

type

375

loose in box lead length 5.0 mm ±5% 14 24 34 64

±3.5% 15 25 35 65

lead length 3.5 mm ±5% 10 20 30 60

±3.5% 11 21 31 61

taped on reel H = 16.0 mm; P0= 12.7 mm ±5% 12 22 32 62

±3.5% 13 23 33 63

taped on reel

(bent back) H = 16.0 mm; P0= 15.0 mm ±5% 16 26 36 66

±3.5% 17 27 37 67

2222 375 XX XX X

TYPE AND PITCHES

375

15.0/7.5 mm

10.0 mm

15.0 mm

22.5 mm

27.5 mm

MULTIPLIER

(nF)

0.01 1

0.1 2

10 4

CAPACITANCE

(numerically)

Example:

104 = 10 ×10 = 100 nF

1999 Apr 29 4

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

TYPE PACKAGING LEAD CONFIGURATION C-TOL 2000 V 2000 V 2500 V 2500 V

monitor

type monitor

type

375

loose in box lead length 5.0 mm ±5% 44 74 91 84

±3.5% 45 75 91 85

lead length 3.5 mm ±5% 40 70 91 80

±3.5% 41 71 91 81

taped on reel H = 16.0 mm; P0= 12.7 mm ±5% 42 72 −82

±3.5% 43 73 −83

taped on reel

(bent back) H = 16.0 mm; P0= 15.0 mm ±5% 46 −−−

±3.5% 47 −−−

2222 375 XX XX X

TYPE AND PITCHES

375

15.0/7.5 mm

10.0 mm

15.0 mm

22.5 mm

27.5 mm

MULTIPLIER

(nF)

0.01 1

0.1 2

10 4

CAPACITANCE

(numerically)

Example:

104 = 10 ×10 = 100 nF

1999 Apr 29 5

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 10 mm

Speciﬁc reference data for the 630 V DC capacitors

Available 630 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle ≤6×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 630 V (DC) 15000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 14... preferred

±3.5% 2222 375 15... on request

lt=3.5 ±0.5 mm ±5% 2222 375 10... on request

±3.5% 2222 375 11... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 12... on request

±3.5% 2222 375 13... on request

Fig.4 Outline.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

(1) Hole ∅1.0 for dt=0.6 mm.

(2) 0 ≤α<50°.

1999 Apr 29 6

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =630 V; URac =300 V/Up-p =850 V

Note

1. The shading indicates preferred types.

(pF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm

680 5.0 ×13.0 ×14.5 0.65 2222 375 14681

750 0.65 2222 375 14751

820

5.5 ×13.5 ×14.5

0.70 2222 375 14821

910 0.70 2222 375 14911

1000 0.70 2222 375 14102

1100 0.75 2222 375 14112

1200 0.75 2222 375 14122

1300 0.75 2222 375 14132

1500 0.80 2222 375 14152

1600 0.85 2222 375 14162

1800

6.0 ×14.0 ×14.5

0.80 2222 375 14182

2000 0.85 2222 375 14202

2200 0.90 2222 375 14222

2400 1.0 2222 375 14242

2700 6.5 ×14.5 ×14.5 1.1 2222 375 14272

1999 Apr 29 7

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 15 mm

PITCH 7.5 mm (bent back leads)

Speciﬁc reference data for the 630 V DC capacitors

Available 630 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle ≤6×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 630 V (DC) 8000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 14... preferred

±3.5% 2222 375 15... on request

lt=3.5 ±0.5 mm ±5% 2222 375 10... on request

±3.5% 2222 375 11... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 12... on request

±3.5% 2222 375 13... on request

Taped on reel

(bent back) H=16.0 mm; P0=15.0 mm; note 2 ±5% 2222 375 16... preferred

±3.5% 2222 375 17... on request

Fig.5 Outline.

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

(3) F−F’<0.3 m.

F=7.5 +0.6/−0.1 mm.

dbook, full pagewidth

seating plane(1)

PØdt

(2)

CBA818

(3)

10 ∅dt

1999 Apr 29 8

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =630 V; URac =300 V/Up-p =850 V

Notes

1. Dimensions in brackets for bent back leads.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

a) For pitch = 15.0 mm: H = 16.0 mm and P0= 12.7 mm.

b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0= 15.0 mm.

Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.

3. The shading indicates preferred types.

(pF)

DIMENSIONS(1)

bmax ×h (h’)max ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

LOOSE IN BOX REEL DIAMETER =500 mm;

H=16.0 mm; P0=15.0 mm(2)

lt=5.0 ±1.0 mm pitch 7.5 mm (bent back)

C-tol =±5% C-tol =±5%

catalogue number(3) last 5 digits(3)

Pitch =15.0 ±0.4 mm (pitch =7.5 ±0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.5/−0.5 mm

3000 5.0 ×14.0 (15.5) ×18.5 1.0 2222 375 14302 .. 16302

3300 2222 375 14332 .. 16332

3600

5.5 ×14.5 (16.0) ×18.5 1.1

2222 375 14362 .. 16362

3900 2222 375 14392 .. 16392

4300 2222 375 14432 .. 16432

4700 2222 375 14472 .. 16472

5100 2222 375 14512 .. 16512

5600 2222 375 14562 .. 16562

6200

6.0 ×15.0 (16.5) ×18.5 1.2

2222 375 14622 .. 16622

6800 2222 375 14682 .. 16682

7500 2222 375 14752 .. 16752

8200 2222 375 14822 .. 16822

9100 2222 375 14912 .. 16912

10000 2222 375 14103 .. 16103

11000 2222 375 14113 .. 16113

12000 2222 375 14123 .. 16123

13000 2222 375 14133 .. 16133

15000 2222 375 14153 .. 16153

16000 2222 375 14163 .. 16163

18000 6.5 ×15.5 (17.0) ×18.5 1.3 2222 375 14183 .. 16183

20000 2222 375 14203 .. 16203

22000 7.0 ×16.0 (17.5) ×18.5 1.5 2222 375 14223 .. 16223

24000 7.5 ×16.5 (18.0) ×18.5 1.6 2222 375 14243 .. 16243

27000 8.0 ×17.0 (18.5) ×18.5 1.9 2222 375 14273 .. 16273

30000 2222 375 14303 .. 16303

33000 8.5 ×17.5 (19.0) ×18.5 2.0 2222 375 14333 .. 16333

36000 9.5 ×18.5 (20.0) ×18.5 2.3 on request on request

39000

1999 Apr 29 9

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm

Speciﬁc reference data for the 630 V DC capacitors

Available 630 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

; taped on reel pitch = 27.5 mm is not available.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

P=22.5 mm ≤8×10−4≤15 ×10−4

P=27.5 mm ≤8×10−4≤20 ×10−4

Rated voltage pulse slope (dU/dt)R at 630 V (DC):

P=22.5 mm 2800 V/µs

P=27.5 mm 1900 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 14... preferred

±3.5% 2222 375 15... on request

lt=3.5 ±0.5 mm ±5% 2222 375 10... on request

±3.5% 2222 375 11... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 12... on request

±3.5% 2222 375 13... on request

Fig.6 Outline.

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

1999 Apr 29 10

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =630 V; URac =300 V/Up-p =850 V

Note

1. The shading indicates preferred types.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.036

7.0 ×20.0 ×26.0 2.7

2222 375 14363

0.039 2222 375 14393

0.043 2222 375 14433

0.047 2222 375 14473

0.051 2222 375 14513

0.056 2222 375 14563

0.062 2222 375 14623

0.068 7.5 ×20.5 ×26.0 3.0 2222 375 14683

0.075 8.0 ×21.0 ×26.0 3.3 2222 375 14753

0.082 2222 375 14823

0.091 8.5 ×21.5 ×26.0 3.8 2222 375 14913

0.1 9.0 ×22.0 ×26.0 4.0 2222 375 14104

0.11 9.5 ×22.5 ×26.0 4.3 2222 375 14114

0.12 10.0 ×23.0 ×26.0 4.7 2222 375 14124

Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.13 9.5 ×22.5 ×30.0 4.7 2222 375 14134

0.15 10.0 ×23.0 ×30.0 5.2 2222 375 14154

0.16 10.5 ×23.5 ×30.0 5.5 2222 375 14164

0.18 11.0 ×24.0 ×30.0 6.0 2222 375 14184

0.2 11.5 ×24.5 ×30.0 6.6 2222 375 14204

0.22 12.5 ×25.5 ×30.0 7.1 2222 375 14224

0.24 13.0 ×26.0 ×30.0 7.7 2222 375 14244

0.27 13.5 ×26.5 ×30.0 8.5 2222 375 14274

1999 Apr 29 11

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 10 mm

Speciﬁc reference data for the 1000 V DC capacitors

Available 1000 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle ≤6×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 1000 V (DC) 27000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 24... preferred

±3.5% 2222 375 25... on request

lt=3.5±0.5 mm ±5% 2222 375 20... on request

±3.5% 2222 375 21... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 22... on request

±3.5% 2222 375 23... on request

Fig.7 Outline.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

(1) Hole ∅1.0 for dt=0.6 mm.

(2) 0 ≤α<50°

1999 Apr 29 12

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =1000 V; URac =400 V/Up-p =1100 V

Note

1. The shading indicates preferred types.

(pF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm

100

5.0 ×13.0 ×14.5 0.50

2222 375 24101

110 2222 375 24111

120 2222 375 24121

130 2222 375 24131

150

5.5 ×13.5 ×14.5

0.55 2222 375 24151

160 0.55 2222 375 24161

180 0.55 2222 375 24181

200 0.55 2222 375 24201

220 0.60 2222 375 24221

240 0.60 2222 375 24241

270 0.60 2222 375 24271

300 0.60 2222 375 24301

330 0.60 2222 375 24331

360 0.60 2222 375 24361

390 0.65 2222 375 24391

430 0.70 2222 375 24431

470 0.75 2222 375 24471

510 0.75 2222 375 24511

560 0.80 2222 375 24561

620 0.80 2222 375 24621

680 0.80 2222 375 24681

750 0.70 2222 375 24751

820 0.70 2222 375 24821

910 0.70 2222 375 24911

1000

6.0 ×14.0 ×14.5

0.75 2222 375 24102

1100 0.85 2222 375 24112

1200 0.90 2222 375 24122

1300 0.85 2222 375 24132

1500 0.90 2222 375 24152

1999 Apr 29 13

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 15 mm

PITCH 7.5 mm (bent back leads)

Speciﬁc reference data for the 1000 V DC capacitors

Available 1000 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle ≤6×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 1000 V (DC) 15000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 24... preferred

±3.5% 2222 375 25... on request

lt=3.5±0.5 mm ±5% 2222 375 20... on request

±3.5% 2222 375 21... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 22... on request

±3.5% 2222 375 23... on request

Taped on reel

(bent back) H=16.0 mm; P0=15.0 mm; note 2 ±5% 2222 375 26... preferred

±3.5% 2222 375 27... on request

Fig.8 Outline.

ok, full pagewidth

seating plane(1)

PØdt

(2)

CBA818

(3)

10 ∅dt

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

(3) F−F’<0.3 mm.

F=7.5 +0.6/−0.1 mm.

1999 Apr 29 14

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =1000 V; URac =400 V/Up-p =1100 V

Notes

1. Dimensions in brackets for bent back leads.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

a) For pitch = 15.0 mm: H = 16.0 mm and P0= 12.7 mm.

b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0= 15.0 mm.

Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.

3. The shading indicates preferred types.

(pF)

DIMENSIONS(1)

bmax ×h (h’)max ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

LOOSE IN BOX REEL DIAMETER =500 mm;

H=16.0 mm; P0=15.0 mm(2)

lt=5.0 ±1.0 mm pitch 7.5 mm (bent back)

C-tol =±5% C-tol =±5%

catalogue number(3) last 5 digits(3)

Pitch =15.0 ±0.4 mm (Pitch =7.5 0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.5/−0.5 mm

1600

5.5 ×14.5 (16.0) ×18.5 1.1

2222 375 24162 .. 26162

1800 2222 375 24182 .. 26182

2000 2222 375 24202 .. 26202

2200 2222 375 24222 .. 26222

2400 2222 375 24242 .. 26242

2700

6.0 ×15.0 (16.5) ×18.5 1.2

2222 375 24272 .. 26272

3000 2222 375 24302 .. 26302

3300 2222 375 24332 .. 26332

3600 2222 375 24362 .. 26362

3900 2222 375 24392 .. 26392

4300 2222 375 24432 .. 26432

4700 2222 375 24472 .. 26472

5100 2222 375 24512 .. 26512

5600 2222 375 24562 .. 26562

6200 2222 375 24622 .. 26622

6800 2222 375 24682 .. 26682

7500 7.0 ×16.0 (17.5) ×18.5 1.4 2222 375 24752 .. 26752

8200 2222 375 24822 .. 26822

9100 2222 375 24912 .. 26912

10000 7.5 ×16.5 (18.0) ×18.5 1.6 2222 375 24103 .. 26103

11000 8.0 ×17.0 (18.5) ×18.5 1.8 2222 375 24113 .. 26113

12000 2222 375 24123 .. 26123

13000 8.5 ×17.5 (19.0) ×18.5 1.9 2222 375 24133 .. 26133

15000 9.0 ×18.0 (19.5) ×18.5 2.1 2222 375 24153 .. 26153

1999 Apr 29 15

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm

Speciﬁc reference data for the 1000 V DC capacitors

Available 1000 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

; taped on reel pitch = 27.5 mm is not available.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

P=22.5 mm ≤6×10−4≤10 ×10−4

P=27.5 mm ≤6×10−4≤15 ×10−4

Rated voltage pulse slope (dU/dt)R at 1000 V (DC):

P=22.5 mm 5000 V/µs

P=27.5 mm 3300 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s

for C ≤47 nF 1600 V; 1 minute

for C > 47 nF ;1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 24... preferred

±3.5% 2222 375 25... on request

lt=3.5±0.5 mm ±5% 2222 375 20... on request

±3.5% 2222 375 21... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 22... on request

±3.5% 2222 375 23... on request

Fig.9 Outline.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

1.6 0.0364 C 47–×()–[]1000 V×

1999 Apr 29 16

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =1000 V; URac =400 V/Up-p =1100 V

Note

1. The shading indicates preferred types.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.016 6.0 ×19.0 ×26.0 2.2 2222 375 24163

0.018 2222 375 24183

0.02 6.5 ×19.5 ×26.0 2.5 2222 375 24203

0.022 2222 375 24223

0.024 7.0 ×20.0 ×26.0 2.7 2222 375 24243

0.027 7.5 ×20.5 ×26.0 3.1 2222 375 24273

0.03 2222 375 24303

0.033 8.0 ×21.0 ×26.0 3.4 2222 375 24333

0.036 8.5 ×21.5 ×26.0 3.7 2222 375 24363

0.039 2222 375 24393

0.043 9.0 ×22.0 ×26.0 4.1 2222 375 24433

Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.047 6.0 ×19.0 ×30.0 3.1 2222 375 24473

0.051 7.5 ×20.5 ×30.0 3.4 2222 375 24513

0.056 2222 375 24563

0.062 8.0 ×21.0 ×30.0 3.8 2222 375 24623

0.068 8.5 ×21.5 ×30.0 4.0 2222 375 24683

0.075 9.0 ×22.0 ×30.0 4.4 2222 375 24753

0.082 9.5 ×22.5 ×30.0 4.7 2222 375 24823

0.091 10.0 ×23.0 ×30.0 5.1 2222 375 24913

0.1 10.5 ×23.5 ×30.0 5.5 2222 375 24104

0.11 11.0 ×24.0 ×30.0 5.9 2222 375 24114

0.12 11.5 ×24.5 ×30.0 6.3 2222 375 24124

0.13 12.0 ×25.0 ×30.0 6.8 2222 375 24134

0.15 12.5 ×25.5 ×30.0 7.6 2222 375 24154

1999 Apr 29 17

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 15 mm

PITCH 7.5 mm (bent back leads)

Speciﬁc reference data for the 1600 V DC capacitors

Available 1600 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle ≤6×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 1600 V (DC) 21000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 34... preferred

±3.5% 2222 375 35... on request

lt=3.5 ±0.5 mm ±5% 2222 375 30... on request

±3.5% 2222 375 31... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 32... on request

±3.5% 2222 375 33... on request

Taped on reel

(bent back) H=16.0 mm; P0=15.0 mm; note 2 ±5% 2222 375 36... preferred

±3.5% 2222 375 37... on request

Fig.10 Outline.

ook, full pagewidth

seating plane(1)

PØdt

(2)

CBA818

(3)

10 ∅dt

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

(3) F−F’<0.3 m.

F=7.5 +0.6/−0.1 mm.

1999 Apr 29 18

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =1600 V; URac =500 V/Up-p =1400 V

Notes

1. Dimensions in brackets for bent back leads.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

a) For pitch = 15.0 mm: H = 16.0 mm and P0= 12.7 mm.

b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0= 15.0 mm.

Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.

3. The shading indicates preferred types.

(pF)

DIMENSIONS(1)

bmax ×h (h’)max ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

LOOSE IN BOX REEL DIAMETER =500 mm;

H=16.0 mm; P0=15.0 mm(2)

lt=5.0 ±1.0 mm pitch 7.5 mm (bent back)

C-tol =±5% C-tol =±5%

catalogue number(3) last 5 digits(3)

Pitch =15.0 ±0.4 mm (pitch =7.5 ±0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.5/−0.5 mm

680 5.5 ×14.5 (15.0) ×18.5 0.75 2222 375 34681 .. 36681

750 2222 375 34751 .. 36751

820 2222 375 34821 .. 36821

910

6.0 ×15.0 (15.5) ×18.5

0.80 2222 375 34911 .. 36911

1000 0.85 2222 375 34102 .. 36102

1100 0.85 2222 375 34112 .. 36112

1200 0.90 2222 375 34122 .. 36122

1300 0.95 2222 375 34132 .. 36132

1500 5.5 ×14.5 (16.0) ×18.5 1.1 2222 375 34152 .. 36152

1600 2222 375 34162 .. 36162

1800 6.0 ×15.0 (16.5) ×18.5 1.2 2222 375 34182 .. 36182

2000 6.5 ×15.5 (17.0) ×18.5 1.3 2222 375 34202 .. 36202

2200 2222 375 34222 .. 36222

2400 7.0 ×16.0 (17.5) ×18.5 1.4 2222 375 34242 .. 36242

2700 7.5 ×16.5 (18.0) ×18.5 1.6 2222 375 34272 .. 36272

3000 2222 375 34302 .. 36302

3300 8.0 ×17.0 (18.5) ×18.5 1.7 2222 375 34332 .. 36332

3600 8.5 ×17.5 (19.0) ×18.5 1.8 2222 375 34362 .. 36362

3900 9.0 ×18.0 (19.5) ×18.5 2.0 2222 375 34392 .. 36392

4300 2222 375 34432 .. 36432

1999 Apr 29 19

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm

Speciﬁc reference data for the 1600 V DC capacitors

Available 1600 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

; taped on reel pitch = 27.5 mm is not available.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

P = 22.5 mm ≤6×10−4≤10 ×10−4

P = 27.5 mm ≤6×10−4≤15 ×10−4

Rated voltage pulse slope (dU/dt)R at 1600 V (DC):

P = 22.5 mm 7000 V/µs

P = 27.5 mm 4700 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 34... preferred

±3.5% 2222 375 35... on request

lt=3.5 ±0.5 mm ±5% 2222 375 30... on request

±3.5% 2222 375 31... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 32... on request

±3.5% 2222 375 33... on request

Fig.11 Outline.

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

1999 Apr 29 20

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =1600 V; URac =500 V/Up-p =1400 V

Note

1. The shading indicates preferred types.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.0047 6.0 ×19.0 ×26.0 2.0 2222 375 34472

0.0051 2222 375 34512

0.0056 2222 375 34562

0.0062 6.5 ×19.5 ×26.0 2.1 2222 375 34622

0.0068 2222 375 34682

0.0075 7.0 ×20.0 ×26.0 2.3 2222 375 34752

0.0082 2222 375 34822

0.0091 7.5 ×20.5 ×26.0 2.5 2222 375 34912

0.01 8.0 ×21.0 ×26.0 2.6 2222 375 34103

0.011 8.5 ×21.5 ×26.0 2.9 2222 375 34113

0.012 2222 375 34123

0.013 9.0 ×22.0 ×26.0 3.1 2222 375 34133

0.015 9.5 ×22.5 ×26.0 3.5 2222 375 34153

0.016 10.0 ×23.0 ×26.0 3.6 2222 375 34163

0.018 10.5 ×23.5 ×26.0 4.0 2222 375 34183

Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.02 9.0 ×22.0 ×30.0 4.2 2222 375 34203

0.022 9.5 ×22.5 ×30.0 4.4 2222 375 34223

0.024 10.0 ×23.0 ×30.0 4.7 2222 375 34243

0.027 10.5 ×23.5 ×30.0 5.2 2222 375 34273

0.03 11.0 ×24.0 ×30.0 5.6 2222 375 34303

0.033 11.5 ×24.5 ×30.0 6.0 2222 375 34333

0.036 12.0 ×25.0 ×30.0 6.5 2222 375 34363

0.039 12.5 ×25.5 ×30.0 6.9 2222 375 34393

1999 Apr 29 21

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 15 mm

PITCH 7.5 mm (bent back leads)

Speciﬁc reference data for the 1600 V DC capacitors (monitor type)

Available 1600 V DC versions (monitor type)

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle ≤6×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 1600 V (DC) 21000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 64... preferred

±3.5% 2222 375 65... on request

lt=3.5 ±0.5 mm ±5% 2222 375 60... on request

±3.5% 2222 375 61... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 62... on request

±3.5% 2222 375 63... on request

Taped on reel

(bent back) H=16.0 mm; P0=15.0 mm; note 2 ±5% 2222 375 66... preferred

±3.5% 2222 375 67... on request

Fig.12 Outline.

dbook, full pagewidth

seating plane(1)

PØdt

(2)

CBA818

(3)

10 ∅dt

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

(3) F−F’<0.3 mm.

F=7.5 +0.6/−0.1 mm.

1999 Apr 29 22

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Monitor

URdc =1600 V; URac =500 V/Up-p =1400 V (monitor type)

Notes

1. Dimensions in brackets for bent back leads.

2. H =in-tape height;P0=sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

a) For pitch =15.0 mm: H =16.0 mm and P0=12.7 mm.

b) For pitch =15/7.5 mm (bent back): H =16.0 mm and P0=15.0 mm.

Standard reel diameter =500 mm. Small reel diameter =356 mm is available on request.

3. The shading indicates preferred types.

(pF)

DIMENSIONS(1)

bmax ×h (h’)max ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

LOOSE IN BOX REEL DIAMETER =500 mm;

H=16.0 mm; P0=15.0 mm(2)

lt=5.0 ±1.0 mm pitch 7.5 mm (bent back)

C-tol =±5% C-tol =±5%

catalogue number(3) last 5 digits(3)

Pitch =15.0 ±0.4 mm (pitch =7.5 ±0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.5/−0.5 mm

1000 7.5 ×16.5 (18.0) ×18.5 1.6 2222 375 64102 .. 66102

1100 8.0 ×17.0 (18.5) ×18.5 1.7 2222 375 64112 .. 66112

1200 2222 375 64122 .. 66122

1300 8.5 ×17.5 (19.0) ×18.5 1.8 2222 375 64132 .. 66132

1500 9.0 ×18.0 (19.5) ×18.5 2.0 2222 375 64152 .. 66152

1600 9.5 ×18.5 (20.0) ×18.5 2.3 2222 375 64162 .. 66162

1999 Apr 29 23

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm

Speciﬁc reference data for the 1600 V DC capacitors (monitor type)

Available 1600 V DC versions (monitor type)

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

; taped on reel pitch = 27.5 mm is not available.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

P=22.5 mm ≤6×10−4≤10 ×10−4

P=27.5 mm ≤6×10−4≤15 ×10−4

Rated voltage pulse slope (dU/dt)R at 1600 V (DC):

P=22.5 mm 7000 V/µs

P=27.5 mm 4700 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 64... preferred

±3.5% 2222 375 65... on request

lt=3.5 ±0.5 mm ±5% 2222 375 60... on request

±3.5% 2222 375 61... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 62... on request

±3.5% 2222 375 63... on request

Fig.13 Outline.

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

1999 Apr 29 24

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Monitor

URdc =1600 V; URac =500 V/Up-p =1400 V (monitor type)

Note

1. The shading indicates preferred types.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.0018 6.0 ×19.0 ×26.0 2.0 2222 375 64182

0.002 2222 375 64202

0.0022 6.5 ×19.5 ×26.0 2.1 2222 375 64222

0.0024 7.0 ×20.0 ×26.0 2.3 2222 375 64242

0.0027 2222 375 64272

0.003 7.5 ×20.5 ×26.0 2.5 2222 375 64302

0.0033 8.0 ×21.0 ×26.0 2.6 2222 375 64332

0.0036 2222 375 64362

0.0039 2222 375 64392

0.0043

8.5 ×21.5 ×26.0 2.9

2222 375 64432

0.0047 2222 375 64472

0.0051 2222 375 64512

0.0056 2222 375 64562

0.0062 9.0 ×22.0 ×26.0 3.1 2222 375 64622

0.0068 9.5 ×22.5 ×26.0 3.5 2222 375 64682

0.0075 10.0 ×23.0 ×26.0 3.6 2222 375 64752

0.0082 10.5 ×23.5 ×26.0 4.0 2222 375 64822

Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.0091 10.0 ×23.0 ×30.0 4.7 2222 375 64912

0.01 10.5 ×23.5 ×30.0 5.2 2222 375 64103

0.011 11.0 ×24.0 ×30.0 5.6 2222 375 64113

0.012 11.5 ×24.5 ×30.0 6.0 2222 375 64123

0.013 12.0 ×25.0 ×30.0 6.5 2222 375 64133

0.015 13.0 ×26.0 ×30.0 6.9 2222 375 64153

0.016 13.5 ×26.5 ×30.0 7.3 2222 375 64163

0.018 14.5 ×27.5 ×30.0 7.8 2222 375 64183

0.02

15.0 ×29.0 ×30.0 8.2

2222 375 64203

0.022 2222 375 64223

0.024 2222 375 64243

0.027 2222 375 64273

0.03 2222 375 64303

0.033 2222 375 64333

0.036 2222 375 64363

0.039 2222 375 64393

1999 Apr 29 25

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 15 mm

PITCH 7.5 mm (bent back leads)

Speciﬁc reference data for the 2000 V DC capacitors

Available 2000 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle ≤6×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 2000 V (DC) 30000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 44... preferred

±3.5% 2222 375 45... on request

lt=3.5 ±0.5 mm ±5% 2222 375 40... on request

±3.5% 2222 375 41... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 42... on request

±3.5% 2222 375 43... on request

Taped on reel

(bent back) H=16.0 mm; P0=15.0 mm; note 2 ±5% 2222 375 46... preferred

±3.5% 2222 375 47... on request

Fig.14 Outline.

andbook, full pagewidth

seating plane(1)

PØdt

(2)

CBA818

(3)

10 ∅dt

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

(3) F−F’<0.3 mm.

F=7.5 +0.6/−0.1 mm.

1999 Apr 29 26

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =2000 V; URac =600 V/Up-p =1700 V

Notes

1. Dimensions in brackets for bent back leads.

2. H = in-tape height; P0= sprocket hole distance; for detailed specifications see chapter

“Packaging information”

a) For pitch = 15.0 mm: H = 16.0 mm and P0= 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and

P0= 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.

3. The shading indicates preferred types.

(pF)

DIMENSIONS(1)

bmax ×h (h’)max ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

LOOSE IN BOX REEL DIAMETER =500 mm;

H=16.0 mm; P0=15.0 mm(2)

lt=5.0 1.0 mm pitch 7.5 mm (bent back)

C-tol =±5% C-tol =±5%

catalogue number(3) last 5 digits(3)

Pitch =15.0 ±0.4 mm (pitch =7.5 ±0.4 mm for bent back leads); dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

100

5.5 ×14.5 (15.0) ×18.5

0.75 2222 375 44101 .. 46101

110 0.75 2222 375 44111 .. 46111

120 0.75 2222 375 44121 .. 46121

130 0.75 2222 375 44131 .. 46131

150 0.75 2222 375 44151 .. 46151

160 0.75 2222 375 44161 .. 46161

180 0.75 2222 375 44181 .. 46181

200 0.75 2222 375 44201 .. 46201

220 0.75 2222 375 44221 .. 46221

240 0.75 2222 375 44241 .. 46241

270 0.75 2222 375 44271 .. 46271

300 0.75 2222 375 44301 .. 46301

330 0.75 2222 375 44331 .. 46331

360 0.75 2222 375 44361 .. 46361

390 0.75 2222 375 44391 .. 46391

430 0.75 2222 375 44431 .. 46431

470 0.80 2222 375 44471 .. 46471

510 0.80 2222 375 44511 .. 46511

560 0.80 2222 375 44561 .. 46561

620 6.0 ×15.0 (15.5) ×18.5 0.85 2222 375 44621 .. 46621

680 0.85 2222 375 44681 .. 46681

750 0.90 2222 375 44751 .. 46751

820 6.5 ×15.5 (16.0) ×18.5 0.95 2222 375 44821 .. 46821

910 5.5 ×14.5 (16.0) ×18.5 1.1 2222 375 44911 .. 46911

1000 6.0 ×15.0 (16.5) ×18.5 1.2 2222 375 44102 .. 46102

1100 2222 375 44112 .. 46112

1200 2222 375 44122 .. 46122

1300 6.5 ×15.5 (17.0) ×18.5 1.3 2222 375 44132 .. 46132

1500 7.0 ×16.0 (17.5) ×18.5 1.4 2222 375 44152 .. 46152

1600 7.5 ×16.5 (18.0) ×18.5 1.5 2222 375 44162 .. 46162

1800 2222 375 44182 .. 46182

2000 8.0 ×17.0 (18.5) ×18.5 1.6 2222 375 44202 .. 46202

2200 8.5 ×17.5 (19.0) ×18.5 1.7 2222 375 44222 .. 46222

2400 9.0 ×18.0 (19.5) ×18.5 1.8 2222 375 44242 .. 46242

2700 9.5 ×18.5 (20.0) ×18.5 2.0 2222 375 44272 .. 46272

1999 Apr 29 27

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm

Speciﬁc reference data for the 2000 V DC capacitors

Available 2000 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

; taped on reel pitch = 27.5 mm is not available.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

P=22.5 mm ≤6×10−4≤10 ×10−4

P=27.5 mm ≤6×10−4≤15 ×10−4

Rated voltage pulse slope (dU/dt)R at 2000 V (DC):

P = 22.5 mm 10000 V/µs

P = 27.5 mm 6700 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 44... preferred

±3.5% 2222 375 45... on request

lt=3.5 ±0.5 mm ±5% 2222 375 40... on request

±3.5% 2222 375 41... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 42... on request

±3.5% 2222 375 43... on request

Fig.15 Outline.

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

1999 Apr 29 28

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =2000 V; URac =600 V/Up-p =1700 V

Note

1. The shading indicates preferred types.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.003

6.0 ×19.0 ×26.0 2.1

2222 375 44302

0.0033 2222 375 44332

0.0036 2222 375 44362

0.0039 2222 375 44392

0.0043 6.5 ×19.5 ×26.0 2.3 2222 375 44432

0.0047 2222 375 44472

0.0051 7.0 ×20.0 ×26.0 2.6 2222 375 44512

0.0056 2222 375 44562

0.0062 7.5 ×20.5 ×26.0 2.8 2222 375 44622

0.0068 8.0 ×21.0 ×26.0 3.0 2222 375 44682

0.0075 2222 375 44752

0.0082 8.5 ×21.5 ×26.0 3.3 2222 375 44822

0.0091 9.0 ×22.0 ×26.0 3.6 2222 375 44912

0.01 9.5 ×22.5 ×26.0 3.8 2222 375 44103

Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.011 9.0 ×22.0 ×30.0 3.8 2222 375 44113

0.012 9.5 ×22.5 ×30.0 4.1 2222 375 44123

0.013 10.0 ×23.0 ×30.0 4.4 2222 375 44133

0.015 10.5 ×23.5 ×30.0 4.9 2222 375 44153

0.016 11.0 ×24.0 ×30.0 5.1 2222 375 44163

0.018 11.5 ×24.5 ×30.0 5.6 2222 375 44183

0.02 12.5 ×25.5 ×30.0 6.1 2222 375 44203

0.022 13.0 ×26.0 ×30.0 6.5 2222 375 44223

1999 Apr 29 29

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm

Speciﬁc reference data for the 2000 V DC capacitors (monitor type)

Available 2000 V DC versions (monitor type)

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

; taped on reel pitch = 27.5 mm is not available.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

P=22.5 mm ≤6×10−4≤10 ×10−4

P=27.5 mm ≤6×10−4≤15 ×10−4

Rated voltage pulse slope (dU/dt)R at 2000 V (DC):

P = 22.5 mm 10000 V/µs

P = 27.5 mm 6700 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 74... preferred

±3.5% 2222 375 75... on request

lt=3.5 ±0.5 mm ±5% 2222 375 70... on request

±3.5% 2222 375 71... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 72... on request

±3.5% 2222 375 73... on request

Fig.16 Outline.

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

1999 Apr 29 30

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Monitor

URdc =2000 V; URac =600 V/Up-p =1700 V (monitor type)

Note

1. The shading indicates preferred types.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.001 6.0 ×19.0 ×26.0 2.1 2222 375 74102

0.0011 2222 375 74112

0.0012 6.5 ×19.5 ×26.0 2.3 2222 375 74122

0.0013 2222 375 74132

0.0015 7.0 ×20.0 ×26.0 2.6 2222 375 74152

0.0016 2222 375 74162

0.0018 7.5 ×20.5 ×26.0 2.8 2222 375 74182

0.002 8.0 ×21.0 ×26.0 3.0 2222 375 74202

0.0022 8.5 ×21.5 ×26.0 3.3 2222 375 74222

0.0024 9.0 ×22.0 ×26.0 3.6 2222 375 74242

0.0027 9.5 ×22.5 ×26.0 3.8 2222 375 74272

0.003 10.0 ×23.0 ×26.0 4.2 2222 375 74302

0.0033 10.5 ×23.5 ×26.0 4.5 2222 375 74332

0.0036 11.0 ×24.0 ×26.0 4.9 2222 375 74362

0.0039 2222 375 74392

0.0043 2222 375 74432

0.0047 11.5 ×24.5 ×26.0 5.3 2222 375 74472

0.0051 2222 375 74512

Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.0056 11.0 ×24.0 ×30.0 5.1 2222 375 74562

0.0062 11.5 ×24.5 ×30.0 5.6 2222 375 74622

0.0068 12.0 ×25.0 ×30.0 5.8 2222 375 74682

0.0075 12.5 ×25.5 ×30.0 6.1 2222 375 74752

0.0082 13.0 ×26.0 ×30.0 6.5 2222 375 74822

0.0091 14.0 ×27.0 ×30.0 7.0 2222 375 74912

0.01 14.5 ×27.5 ×30.0 7.5 2222 375 74103

0.011

15.5 ×29.5 ×30.0 8.1

2222 375 74113

0.012 2222 375 74123

0.013 2222 375 74133

0.015 2222 375 74153

1999 Apr 29 31

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 22.5 (bent back leads)/27.5 mm

Fig.17 Outline for pitch =22.5 mm

(bent back leads).

144x12(halfpage)

CBA632

Ødt

seating

plane (1)

(2)

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

Fig.18 Outline for pitch =27.5 mm.

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

144x12(halfpage)

CBA628

PAØdt

seating

plane (1)

(2)

Speciﬁc reference data for the 2500 V DC capacitors

Available 2500 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

; taped on reel pitch = 27.5 mm is not available.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

P=22.5 mm ≤6×10−4≤10 ×10−4

P=27.5 mm ≤6×10−4≤10 ×10−4

Rated voltage pulse slope (dU/dt)R at 2500 V (DC) 18000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >900 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3500 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 91... on request

±3.5% 2222 375 91... on request

lt=3.5 ±0.5 mm ±5% 2222 375 91... on request

±3.5% 2222 375 91... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 ..... on request

±3.5% 2222 375 ..... on request

1999 Apr 29 32

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

URdc =2500 V; URac =880 V/Up-p =2500 V

Note

1. Only for bent back leads.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

LOOSE IN BOX; lt=3.5 ±0.5 mm

P=22.5 ±0.4 mm(1) P=27.5 ±0.4 mm

C-tol =±5%

catalogue number last 5 digits

dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.001

7.0 ×20.0 ×30.0 2.9

2222 375 91001 .. 91003

0.0011 2222 375 91005 .. 91007

0.0012 2222 375 91011 .. 91013

0.0013 2222 375 91015 .. 91017

0.0015 2222 375 91021 .. 91023

0.0016 2222 375 91025 .. 91027

0.0018 2222 375 91031 .. 91033

0.0020 7.5 ×20.5 ×30.0 2.9 2222 375 91035 .. 91037

0.0022 8.0 ×21.0 ×30.0 3.2 2222 375 91041 .. 91043

0.0024 2222 375 91045 .. 91047

0.0025 2222 375 91051 .. 91053

0.0027 8.5 ×21.5 ×30.0 3.5 2222 375 91055 .. 91057

0.0030 9.0 ×22.0 ×30.0 3.8 2222 375 91061 .. 91063

0.0033 9.5 ×22.5 ×30.0 4.0 2222 375 91065 .. 91067

0.0036 10.0 ×23.0 ×30.0 4.3 2222 375 91071 .. 91073

0.0039 10.5 ×23.5 ×30.0 4.6 2222 375 91075 .. 91077

0.0043 11.0 ×24.0 ×30.0 5.0 2222 375 91081 .. 91083

0.0047 11.5 ×24.5 ×30.0 5.3 2222 375 91085 .. 91087

0.0051 12.0 ×25.0 ×30.0 5.7 2222 375 91091 .. 91093

0.0056 12.5 ×25.5 ×30.0 6.1 2222 375 91095 .. 91097

0.0062 13.5 ×26.5 ×30.0 6.6 2222 375 91101 .. 91103

0.0068 14.0 ×27.5 ×30.0 7.2 2222 375 91105 .. 91107

1999 Apr 29 33

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm

Speciﬁc reference data for the 2500 V DC capacitors (monitor type)

Available 2500 V DC versions (monitor type)

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

; taped on reel pitch = 27.5 mm is not available.

2. H = in-tape height;P0= sprocket hole distance; for detailed specifications refer to this handbook, chapter

“Packaging

information”

DESCRIPTION VALUE

at 10 kHz at 100 kHz

Tangent of loss angle:

P=22.5 mm ≤6×10−4≤10 ×10−4

P=27.5 mm ≤6×10−4≤15 ×10−4

Rated voltage pulse slope (dU/dt)R at 2500 V (DC) 18000 V/µs

R between leads at 500 V; 1 minute >100000 MΩ

R between interconnected leads and case; 500 V; 1 minute >100000 MΩ

Ionization (AC) voltage (typical value) at 20 pC peak discharge >900 V

Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3500 V; 1 minute

Withstanding (DC) voltage between leads and case 2840 V; 1 minute

PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 84... preferred

±3.5% 2222 375 85... on request

lt=3.5 ±0.5 mm ±5% 2222 375 80... on request

±3.5% 2222 375 81... on request

Taped on reel H =16.0 mm; P0=12.7 mm; note 2 ±5% 2222 375 82... on request

±3.5% 2222 375 83... on request

Fig.19 Outline.

(1) Hole ∅1.3 for dt=0.8 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

seating plane(1)

CBA070

∅dt

(2)

1999 Apr 29 34

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Monitor

URdc =2500 V; URac =600 V/Up-p =1700 V (monitor type)

Note

1. The shading indicates preferred types.

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER(1)

LOOSE IN BOX

lt=5.0 ±1.0 mm

C-tol =±5%

Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.001 7.0 ×20.0 ×26.0 2.6 2222 375 84102

0.0011 2222 375 84112

0.0012 7.5 ×20.5 ×26.0 2.8 2222 375 84122

0.0013 2222 375 84132

0.0015 8.5 ×21.5 ×26.0 3.3 2222 375 84152

0.0016 2222 375 84162

0.0018 9.0 ×22.0 ×26.0 3.6 2222 375 84182

0.002 9.5 ×22.5 ×26.0 3.8 2222 375 84202

0.0022 10.0 ×23.0 ×26.0 4.1 2222 375 84222

0.0024 10.5 ×23.5 ×26.0 4.5 2222 375 84242

0.0027 11.0 ×24.0 ×26.0 4.9 2222 375 84272

Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm

0.003 11.0 ×24.0 ×30.0 5.1 2222 375 84302

0.0033 11.5 ×24.5 ×30.0 5.4 2222 375 84332

0.0036 12.0 ×25.0 ×30.0 5.8 2222 375 84362

0.0039 12.5 ×25.5 ×30.0 6.1 2222 375 84392

0.0043 13.0 ×26.0 ×30.0 6.5 2222 375 84432

0.0047 13.5 ×26.5 ×30.0 6.9 2222 375 84472

0.0051 14.0 ×27.0 ×30.0 7.3 2222 375 84512

0.0056 15.0 ×29.0 ×30.0 7.8 2222 375 84562

0.0062

15.5 ×29.5 ×30.0 8.2

2222 375 84622

0.0068 2222 375 84682

0.0075 2222 375 84752

0.0082 2222 375 84822

0.0091 2222 375 84912

1999 Apr 29 35

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

CONSTRUCTION

Description

•Series-constructed, impregnated polypropylene film,

aluminium foil and metallized internal electrode

•Protected by a hard, water-repellent, solvent-resistant

epoxy lacquer

•Radial leads, solder-coated:

– Copper clad steel wire for original pitch =10 mm

– Copper wire for original pitch =15, 22.5 and

27.5 mm.

FOR KP/MKP 630V-2000VAND 2500 V (MONITOR TYPE)

FOR KP/MKP 2500 V (2222 375 91...)

Fig.20 Construction.

144x12(halfpage)

CBA282

polypropylene film

metallized polypropylene film

aluminium foil

metal spray layer

connecting wire

KP/MKP

Fig.21 Construction.

144x12(halfpage)

metal spray layer

MKP metallized polypropylene film

connecting wire

CBA283

Aluminium foil

polypropylene film

Mounting

NORMAL USE

The capacitors are designed for printed-circuit boards

applications. The capacitors packed in bandoliers are

designed for mounting on printed-circuit boards by means

of automatic insertion machines.

For detailed tape specifications refer to this handbook,

chapter

“Packaging information”

SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION

AND SHOCK

•For pitches of ≤15 mm capacitors shall be mechanically

fixed by the leads.

•For larger pitches the capacitors shall be mounted in the

same way and the body clamped.

Storage temperature

•Storage temperature: Tstg =−25 to +40 °C with RH

maximum 80% without condensation.

RATINGS AND CHARACTERISTICS REFERENCE

CONDITIONS

Unless otherwise specified, all electrical values apply to an

ambient free air temperature of 23 ±1°C, an atmospheric

pressure of 86 to 106 kPa and a relative humidity of

50 ±2%.

For reference testing, a conditioning period shall be

applied over 96 ±4 hours by heating the products in a

circulating air oven at the rated temperature and a relative

humidity not exceeding 20%.

1999 Apr 29 36

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

CHARACTERISTICS

Capacitance

Impedance

Fig.22 Capacitance change as a function of ambient temperature.

296x12(full_width)

100-50 0 50

CBA829

-8

-4

Tamb (°C)

∆C/C

(%)

min.

max.

typical

Fig.23 Impedance as a function of frequency: typical curves.

296x12(full_width)

CBA285

Impedance

(Ω)

108109

107

106

105

104

103

10 -2

100

10 -1

102

101

f (Hz)

33 nF; 630V

12 nF; 1000V

3.9 nF; 1000V

1.5 nF; 1600-2000-2500V

47 nF; 1000V

100 nF; 630V

1999 Apr 29 37

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Maximum DC voltage as a function of temperature

Fig.24 Multiplying factor as a function of temperature.

handbook, full pagewidth

CBA748

1.2

0.8

0.4

1.0

0.6

0.2

factor

−60 −20 8040−40 0 20 60 100 120

Tamb (°C)

1999 Apr 29 38

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Maximum RMS voltage (sinewave) as a function of frequency

Fig.25 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =630 V.

f (Hz)

AC Voltage

(V)

CBA286

296x12(full_width)

107108

106

105

104

103

101

102

KP/MKP 375

10 nF

22 nF

1.0 nF

2.2 nF

4.7 nF

47 nF

100 nF

220 nF

Fig.26 AC voltage (RMS value) as a function of frequency at 85 °C<T

amb ≤105 °C for URdc = 630 V.

f (Hz)

AC Voltage

(V)

CBA830

296x12(full_width)

107108

106

105

104

103

101

102

KP/MKP 375

10 nF

22 nF

1.0 nF

2.2 nF

4.7 nF

47 nF

100 nF

220 nF

1999 Apr 29 39

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Fig.27 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1000 V.

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA287

103

101

102

KP/MKP 375

100 pF

220 pF

470 pF

1.0 nF

2.2 nF

4.7 nF

22 nF

47 nF

100 nF

Fig.28 AC voltage (RMS value) as a function of frequency at 85 °C<T

amb ≤105 °C for URdc = 1000 V.

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA831

103

101

102

KP/MKP 375

100 pF

220 pF

470 pF

1.0 nF

2.2 nF

4.7 nF

22 nF

47 nF

100 nF

1999 Apr 29 40

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Fig.29 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1600 V.

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA288

103

101

102

KP/MKP 375

1.0 nF

2.2 nF

4.7 nF

22 nF

10 nF

Fig.30 AC voltage (RMS value) as a function of frequency at 85 °C<T

amb ≤105 °C for URdc = 1600 V.

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA832

103

101

102

KP/MKP 375

1.0 nF

2.2 nF

4.7 nF

22 nF

10 nF

1999 Apr 29 41

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Fig.31 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1600 V

(monitor type).

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA940

103

101

102

KP/MKP 375

47 nF

22 nF

10 nF

4.7 nF

2.2 nF

1.0 nF

Fig.32 AC voltage (RMS value) as a function of frequency at 85 °C<T

amb ≤105 °C for URdc = 1600 V

(monitor type).

handbook, full pagewidth

AC voltage

(V)

f (Hz)

CBA941

103104105106107108

103

102

KP/MKP 375

22 nF

47 nF

10 nF

4.7 nF

2.2 nF

1.0 nF

1999 Apr 29 42

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Fig.33 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2000 V.

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA289

103

101

102

KP/MKP 375

10 nF

4.7 nF

2.2 nF

1.0 nF

470 pF

220 pF

100 pF

Fig.34 AC voltage (RMS value) as a function of frequency at 85 °C<T

amb ≤105 °C for URdc = 2000 V.

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA833

103

101

102

KP/MKP 375

10 nF

4.7 nF

2.2 nF

1.0 nF

470 pF

220 pF

100 pF

1999 Apr 29 43

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Fig.35 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2000 V

(monitor type).

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA942

103

101

102

KP/MKP 375

15 nF

10 nF

4.7 nF

2.2 nF

1.0 nF

Fig.36 AC voltage (RMS value) as a function of frequency at 85 °C<T

amb ≤105 °C for URdc = 2000 V

(monitor type).

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA943

103

101

102

KP/MKP 375

15 nF

10 nF

4.7 nF

2.2 nF

1.0 nF

1999 Apr 29 44

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Fig.37 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2500 V.

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA290

103

101

102

KP/MKP 375

4.7 nF

2.2 nF

1.0 nF

Fig.38 AC voltage (RMS value) as a function of frequency at 85 °C<T

amb ≤105 °C for URdc = 2500 V.

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA834

103

101

102

KP/MKP 375

4.7 nF

2.2 nF

1.0 nF

1999 Apr 29 45

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Maximum RMS current (sinewave) as a function of frequency

The maximum RMS current is defined by .

Uac is the maximum AC voltage depending on the ambient temperature in Figs 25 to 40.

Fig.39 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2500 V

(monitor type).

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA944

103

101

102

KP/MKP 375

10 nF

4.7 nF

2.2 nF

1.0 nF

Fig.40 AC voltage (RMS value) as a function of frequency at 85 °C<T

amb ≤105 °C for URdc = 2500 V

(monitor type).

296x12(full_width)

f (Hz)

AC Voltage

(V)

107108

106

105

104

103

CBA945

103

101

102

KP/MKP 375

10 nF

4.7 nF

2.2 nF

1.0 nF

Iac ωCU

××=

1999 Apr 29 46

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Tangent of loss angle

Fig.41 Tangent of loss angle as a function of frequency: typical curves.

296x12(full_width)

106

CBA958

105

104

103

102

100

101

frequency (Hz)

dissipation

factor

(x 10-4)(3)

(2)

(1)

1. KP/MKP 10.0 and 15.0 mm pitch all versions

22.5 mm pitch, 1000, 1600, 2000 and 2500V versions

2. KP/MKP 22.5 mm pitch, 630V versions

27.5 mm pitch 630, 1000, 1600 and 2000V versions

3. KP/MKP 27.5 mm pitch, 630V versions

Fig.42 Tangent of loss angle as a function of frequency: maximum curves.

296x12(full_width)

106

CBA959

105

104

103

102

100

101

frequency (Hz)

dissipation

factor

(x 10-4)

(2)

1. KP/MKP 10.0 and 15.0 mm pitch all versions

22.5 mm pitch, 1000, 1600, 2000 and 2500V versions

2. KP/MKP 22.5 mm pitch, 630V versions

27.5 mm pitch 630, 1000, 1600, 2000 and 2500V versions

3. KP/MKP 27.5 mm pitch, 630V versions

(3)

(1)

1999 Apr 29 47

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Insulation resistance

Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)

Fig.43 RC product as a function of ambient free air temperature; typical curve.

handbook, full pagewidth

(s)

12010004020 8060

104

106

CBA647

105

Tamb (°C)

handbook, full pagewidth

CBA757

−60 −20 80

−40 0 20 60 100 120

Tamb (°C)

∆T

(°C)

Fig.44 Maximum allowed component temperature rise as a function of the ambient temperature.

1999 Apr 29 48

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C

Table 1 Heat conductivity

Power dissipation and maximum component temperature rise

The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a

function of the free air ambient temperature.

Power dissipation can be calculated in accordance with chapter

“Introduction”

, section

“Maximum power dissipation”

The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more

details) or calculated by :

•∆T=component temperature rise (°C).

•P=power dissipation of the component (mW).

•G=heat conductivity of the component (mW/°C).

bmax

(mm)

ORIGINAL PITCH

(mm)

10 15 22.5 27.5

4.0 4.0 5.0 −−

4.5 4.5 6.0 −−

5.0 5.0 6.0 12.0 13.0

5.5 6.0 6.5 13.0 15.0

6.0 6.0 6.5 13.0 15.0

6.5 6.5 8.0 15.0 17.0

7.0 −8.0 15.0 17.0

7.5 −9.0 17.0 18.0

8.0 −9.0 17.0 20.0

8.5 −11.0 18.0 20.0

9.0 −11.0 18.0 22.0

9.5 −12.0 20.0 22.0

10.0 −12.0 20.0 23.0

10.5 −−22.0 25.0

11.0 −−−25.0

11.5 −−−27.0

12.0 −−−27.0

12.5 −−−30.0

13.0 −−−30.0

13.5 −−−30.0

14.0 −−−30.0

14.5 −−−33.0

15.0 −−−33.0

15.5 −−−37.0

16.0 −−−37.0

∆TPG⁄=

1999 Apr 29 49

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Measuring the component temperature

A thermocouple must be attached to the capacitor body; see Fig.45.

The temperature is measured in unloaded (Tamb) and maximum loaded

condition (Tc).

The temperature rise is given by: .

To avoid radiation or convection, the capacitor should be tested in a wind-free

box.

Fig.45 Mounting the thermocouple.

handbook, halfpage

thermocouple

CBA771

∆TT

amb

–=

1999 Apr 29 50

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Application note and limiting conditions

To select the capacitor for a certain application, the following conditions must be checked:

1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).

2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level.

3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and

without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied

by URdc and divided by the applied voltage.

For all other pulses following equation must be fulfilled:

T is the pulse duration.

4. The maximum component surface temperature rise must be lower than the limits in Fig.44.

Example

C=10 nF - 1600 V, KP/MKP.

This is a signal as in Fig.46 with:

Up-p =1200 V; Up=1100 V; T1=12 µs; T2=64 µs.

The ambient temperature is 50 °C.

Checking the conditions:

1. The peak voltage Up=1100 V is lower than 1600 V (DC).

2. The peak-to-peak voltage 1200 V is lower than .

3. The voltage pulse slope: 320 V/µs is much lower than 7000 V/µs.

4. The dissipated power is 170 mW as calculated with Fourier terms.

This gives a temperature rise of which is allowed according Fig.44 for an ambient temperature

of 50 °C.

2dU

--------





∫dt×× URdc dU

--------





rated

×<

2 2 500 V (AC)×× 1414 Upp–

170 mW

17 mW °C⁄

------------------------------- 10 °C=

Fig.46 Voltage signal.

296x12(full_width)

time

Up-p

voltage

CBA295

1999 Apr 29 51

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

MARKING

Product marking

COUNTRY OF ORIGIN:BELGIUM

The capacitors are marked on the top (see Fig.47) with the

following information:

1. Capacitance code in accordance with

“IEC 60062”

2. Capacitance tolerance: J =±5%; A =3.5%

3. Rated peak-to-peak voltage (e.g. 1700 Vp-p)

4. Manufacturer’s type designation (375)

5. Code for dielectric material (KP/MKP)

6. Manufacturer’s emblem (only for original

pitch ≥15 mm)

7. Year and month of manufacturing code (only for

original pitch ≥22.5 mm). Fig.47 Example of marking.

144x12(halfpage) 2n2 J 1700Vp-p

375 KP/MKP F8

CBA296

COUNTRY OF ORIGIN: PRC (PEOPLE’SREPUBLIC OF CHINA)

The capacitors are marked in ink on the front (see Fig.48)

with the following information:

1. Capacitance code in accordance with “

IEC 60062”

2. Capacitance tolerance: J =±5%; A =3.5%

3. Rated (DC) voltage (e.g. 2000 V)

4. Manufacturer’s type designation (375)

5. Code for dielectric material (KP/MKP)

6. Year and week of manufacturing code.

Fig.48 Example of marking.

handbook, halfpage

CBA446

2n2 J 2000V

375 KP/MKP 9910

1999 Apr 29 52

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Package marking

The package containing the capacitors is marked as shown in Fig.49.

handbook, full pagewidth

CCA427

10.

Fig.49 Barcode label.

Barcode label marking

LINE MARKING EXPLANATION

1 Manufacturer's name

2 Country of origin

3 Sub-family

4 Type description

5 Capacitance value in mF, tolerance, voltage

and climatic category

(“IEC 60068-1”)

6 Batchnumber (only for capacitors from PRC)

7•Country of origin: Belgium

Preference origin code: A

Country of origin in code: 170 (Belgium)

Responsible production centre: HQ

Work order: WO

•Country of origin: China

Preference origin code: N

Country of origin in code: 260 (PRC)

Responsible production centre: 07

8 Product type description

9 Quantity and production period, year and week

code

10 Product code (12NC)

Please note:

In due time BC COMPONENTS

will replace PHILIPS COMPONENTS

1999 Apr 29 53

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

QUICK REFERENCE TEST REQUIREMENTS (see note 1)

TEST PROCEDURE

(quick reference) REQUIREMENTS

Robustness of leads

Tensile strength:

“IEC 60068-2-21”

load 10 N; 10 s

no visible damage

legible marking

∆C/C≤1% +5pF

∆tan δ≤5×10−4

Bending:

“IEC 60068-2-21”

load 5 N; 4 ×90°

Resistance to soldering heat:

“IEC 60068-2-20”

solder bath: 260 °C; 10 s

Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes

Robustness of component

Vibration:

“IEC 60068-2-6”

10 to 55 Hz; amplitude 0.75 mm or

acceleration 98 m/s2; 6 hours ∆C/C≤2% (C >0.0056 µF)

∆C/C≤3% +5 pF (C ≤0.0056 µF)

∆tan δ≤5×10−4

Shock:

“IEC 60068-2-27”

half sinewave; 490 m/s2; 11 ms

Climatic sequence

Dry heat:

“IEC 60068-2-2”

16 hours; 105 °C

∆C/C≤3% +5pF

∆tan δ≤10 ×10−4

Rins ≥50% of speciﬁed value

Damp heat, cyclic, test Db, ﬁrst cycle:

“IEC 60068-2-30”

Cold:

“IEC 60068-2-1”

2 hours; −55 °C

Damp heat, cyclic, test Db,

remaining cycles:

“IEC 60068-2-30”

Other applicable tests

Damp heat, steady state:

“IEC 60068-2-3”

56 days; 40 °C; 90 to 95% RH ∆C/C≤1% +5pF

∆tan δ≤5×10−4

Rins ≥50% of speciﬁed value

Endurance (AC):

“IEC 60384-17”

2000 hours;

1.25 ×URac (RMS); 50 Hz; 85°C∆C/C≤2% (C >0.0056 µF)

∆C/C≤3% +5 pF (C ≤0.0056 µF)

∆tan δ≤10 ×10−4

Rins ≥50% of speciﬁed value

2000 hours;

0.875 ×URac (RMS); 50 Hz; 105°C∆C/C≤5% +5pF

∆tan δ≤10 ×10−4

Rins ≥50% of speciﬁed value

Heat storage:

“IEC 60384-17”

2000 hours; 105 °C∆C/C≤3% (C >0.0056 µF)

∆C/C≤5% +5 pF (C ≤0.0056 µF)

∆tan δ≤10 ×10−4

1999 Apr 29 54

BC Components Product speciﬁcation

AC and pulse

metallized polypropylene ﬁlm capacitors KP/MKP 375

Note

1. For detailed information: see

“Type detail specification HQN-384-17/104”

Resistance to soldering heat with

preheating:

“IEC 60384-17”

body temperature: 105 °C;

bath temperature: 260 °C;

dwell time: 10 s

∆C/C≤2% +5pF

∆tan δ≤5×10−4

Passive ﬂammability:

“IEC 60384-1”

class C no burning

Endurance (DC):

“IEC 60384-17”

2000 hours:

1.25 ×URdc; 85 °C

0.875 ×URdc; 105 °C

∆C/C≤3% +5pF

∆tan δ≤10 ×10−4

Rins ≥50% of speciﬁed value

TEST PROCEDURE

(quick reference) REQUIREMENTS