LM5100AMRXNOPB - TEXAS INSTRUMENTS

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 1

HMC836LP6CE

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

v07.1211

Functional Diagram

Features

• RF Bandwidth: 3365 to 3705 MHz

• Ultra Low Phase Noise

-98 dBc/Hz in Band Typ

• Figure of Merit (FOM) -227 dBc

• < 180 fs rms Jitter

(Integrated 100 Hz to 100 MHz SSB)

• 24-bit Frequency Step Size,

Resolution 3 Hz typ

• Exact Frequency Mode

• Built-in Digital Self Test

• 40 Lead 6x6 mm SMT Package: 36 mm2

Typical Applications

• Cellular/4G Infrastructure

• Repeaters and Femtocells

• Communications Test Equipment

• CATV Equipment

• Phased Array Applications

• DDS Replacement

• Very High Data Rate Radios

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

HMC836* PRODUCT PAGE QUICK LINKS

Last Content Update: 12/18/2017

COMPARABLE PARTS

View a parametric search of comparable parts.

EVALUATION KITS

•HMC836LP6CE Evaluation Board

DOCUMENTATION

Application Notes

•Frequency Hopping with Hittite PLLVCOs Application

Note

•PLL & PLLVCO Serial Programming Interface Mode

Selection Application Note

•Power-Up & Brown-Out Design Considerations for RF PLL

+VCO Products Application Note

•Wideband RF PLL+VCO and Clock Generation Products

FAQs

Data Sheet

•HMC836 Data Sheet

User Guides

•PLLs with Integrated VCO - RF Applications Product &

Operating Guide

REFERENCE MATERIALS

Product Selection Guide

•RF, Microwave, and Millimeter Wave IC Selection Guide

2017

Quality Documentation

•HMC Legacy PCN: LP6CE and LP6GE QFN - Alternate

assembly source

•Package/Assembly Qualification Test Report: LP6, LP6C,

LP6G (QTR: 2014-00368)

•Package/Assembly Qualification Test Report: Plastic

Encapsulated QFN (QTR: 05006 REV: 02)

•Semiconductor Qualification Test Report: BiCMOS-A (QTR:

2013-00235)

Technical Articles

•RF/Microwave PLLs Integrate Low Noise VCOs

DESIGN RESOURCES

•HMC836 Material Declaration

•PCN-PDN Information

•Quality And Reliability

•Symbols and Footprints

DISCUSSIONS

View all HMC836 EngineerZone Discussions.

SAMPLE AND BUY

Visit the product page to see pricing options.

TECHNICAL SUPPORT

Submit a technical question or find your regional support

number.

DOCUMENT FEEDBACK

Submit feedback for this data sheet.

This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not

trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 2

General Description

The HMC836LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated Voltage Controlled

Oscillator (VCO). The PLL consists of an integrated low noise VCO with x2 output, an autocalibration subsystem for

low voltage VCO tuning, a very low noise digital Phase Detector (PD), a precision controlled charge pump, a low noise

reference path divider and a fractional divider.

The fractional PLL features an advanced delta-sigma modulator design that allows both ne step sizes and low

spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow faster frequency

hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for faster frequency

hopping and low micro-phonics.

For theory of operation and register map refer to the “PLLs with Integrated VCOs - RF VCOs Operating Guide”. To

view the Operating Guide, please visit www.hittite.com and choose HMC836LP6CE from the “Search by Part

Number” pull down menu.

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

Parameter Condition Min. Ty p. Max. Units

RF Output Characteristics

VCO Frequency 1682.5 1852.5 MHz

RF Output Frequency at fVCO x2 3365 3705 MHz

RF Output Power at fVCO x2 -1 6 9 dBm

VCO Tuning Sensitivity Measured at 2 GHz, 2V 15 MHz/V

VCO Supply Pushing Measured at 2 GHz, 2V -2 1.5 MHz/V

RF Output 2nd Harmonic -25 dBc

RF Output 3rd Harmonic -23 dBc

RF Output 4th Harmonic -31 dBc

RF Divider Characteristics

19-Bit N-Divider Range (Integer) Max = 219 - 1 16 524,287

19-Bit N-Divider Range (Fractional) Fractional nominal divide ratio

varies (-3 / +4) dynamically max 20 524,283

REF Input Characteristics

Ref Input Frequency

Synthesizer phase noise can

degrade by about 5dB when oper-

ating with a reference frequency

near the low end of this range.

10 50 200 MHz

Ref Input Range AC Coupled 1.5 23.3 Vpp

Ref Input Capacitance 5pF

14-Bit R-Divider Range 116,383

Phase Detector (PD)

PD Frequency Fractional Feedback Mode [1] 0.1 100 MHz

PD Frequency Fractional Feedforward

Mode (and Register 6 [17:16] = 10)

[1] 0.1 80 MHz

PD Frequency Integer Mode [1] 0.1 125 MHz

Electrical Specications, TA = +25° C

VPPCP, VDDCP, VCC1, VCC2 = 5V ±4%; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS =

3.3V ±6% GNDCP = GNDLS = Ground Paddle = 0V

Note 1: This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback

mode, the maximum PFD rate = fvco/20 or 100MHz, whichever is less.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 3

Parameter Condition Min. Ty p. Max. Units

Charge Pump

Output Current 0.02 2.54 mA

Charge Pump Gain Step Size (5-Bits) 20 µA

PD/Charge Pump SSB Phase Noise 50 MHz Ref, Input Referred,

1 kHz -141 dBc/Hz

10 kHz add 1 dB for fractional -149 dBc/Hz

100 kHz add 3 dB for fractional -153 dBc/Hz

Logic Inputs

VIH Input High Voltage DVDD3V-0.4 DVDD3V V

VIL Input Low Voltage 0 0.4 V

Logic Outputs

VOH Output High Voltage DVDD3V-0.4 DVDD3V V

VOL Output Low Voltage 00.4 V

Power Supply Voltages

Analog 3.3V Supplies AVDD, VCCHF, VCCPS,

VCCPD, RVDD 3.0 3.3 3.5 V

Digital Supply DVDD3V 3.0 3.3 3.5 V

Analog 5V Supplies VPPCP, VDDCP, VCC1, VCC2 4.8 55.2 V

Power Supply Currents

+5V Analog Charge Pump VPPCP, VDDCP 5.3 mA

+5V VCO Core and PLL Buffer VCC2 56 mA

+5V VCO RF Buffer VCC1 36 mA

+3.3V Analog AVDD, VCCHF, VCCPS, VCCPD,

RVDD 45 mA

+3.3V Digital DVDD3V 6.5 mA

Power Down - Crystal Off Reg 01h=0,

Crystal Not Clocked 10 µA

Power Down - Crystal On, 100 MHz Reg 01h=0,

Crystal Clocked 100 MHz 10 200 µA

Power on Reset

Typical Reset Voltage on DVDD 700 mV

DVDD Voltage for No Reset 1.5 V

Power on Reset Delay 250 µs

VCO Open Loop SSB Phase Noise at fo = 1.75 GHz

10 kHz Offset -91 dBc/Hz

100 kHz Offset -111 dBc/Hz

1 MHz Offset -136 dBc/Hz

10 MHz Offset -157 dBc/Hz

100 MHz Offset -169 dBc/Hz

Closed Loop Phase Noise PLL + VCO at fo = 3.5 GHz

Integer, 50 MHz PFD 1 kHz Offset -102 dBc/Hz

Integer, 50 MHz PFD 10 kHz Offset -107 dBc/Hz

Integer, 50 MHz PFD 100 kHz Offset -107 dBc/Hz

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

Electrical Specications (Continued)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 4

Electrical Specications (Continued)

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

Typical Closed Loop

Fractional Mode, SSB Phase Noise [1]

Closed Loop

Integer Mode, SSB Phase Noise

VCO Free Running SSB Phase Noise

Parameter Condition Min. Ty p. Max. Units

Fractional, 50 MHz PFD 1 kHz Offset -197 dBc/Hz

Fractional, 50 MHz PFD 10 kHz Offset -102 dBc/Hz

Fractional, 50 MHz PFD 100 kHz Offset -102 dBc/Hz

Figure of Merit Normalized 1 Hz

Integer Mode Measured w/ 50 MHz PD

at 30 kHz Offset -229 dBc/Hz

Fractional Mode Measured w/ 50 MHz PD

at 30 kHz Offset -227 dBc/Hz

[1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop lter values: Contact factory for component values) 2mA Charge Pump, -385µA

Offset.

-170

-160

-150

-140

-130

-120

-110

-100

-90

-80

-70

100 1000 104105106107108

3300 MHz

3500 MHz

3700 MHz

FREQUENCY OFFSET (Hz)

PHASE NOISE (dBc/Hz)

-180

-160

-140

-120

-100

-80

-60

-40

-20

102103104105106107108

3300 MHz

3500 MHz

3700 MHz

FREQUENCY OFFSET (Hz)

PHASE NOISE (dBc/Hz)

-170

-160

-150

-140

-130

-120

-110

-100

-90

-80

-70

100 1000 104105106107108

3365 MHz

3535 MHz

3705 MHz

FREQUENCY OFFSET (Hz)

PHASE NOISE (dBc/Hz)

Typical Tuning Curves vs. Switch Position

012345

TUNING VOLTAGE (V)

kvco (MHz/V)

n0 n2

n10

n12

n14

n16

n18

n20

n22

n24

n26 n30

fmax

fmin n30 n31

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 5

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

Figure of MeritTypical Output Power

Typical VCO Tuning Voltage After Calibration

vs. VCO Frequency & CAP Setting [2]

Typical VCO Sensitivity vs. VCO Tune

Voltage & CAP Setting @ fo [2]

[1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop lter values: Contact factory for component values) 2mA Charge Pump, -385µA

Offset.

[2] The CAP setting is the digitally selectable VCO tank capacitor setting. This feature allows the nominal center frequency of the VCO to be

adjusted by switching in/out VCO tank capacitors.

3300 3400 3500 3600 3700 3800

+27C

+85C

-40C

OUTPUT FREQUENCY (MHz)

OUTPUT POWER (dBm)

-240

-230

-220

-210

-200

102103104105106

NORMALIZED PHASE NOISE (dBc/Hz)

FREQUENCY OFFSET (Hz)

FOM Floor

FOM 1/f Noise

Typ FOM vs Offset

VCO FREQUENCY

TUNE VOLTAGE AFTER CALIBRATION (V)

fmin fmax

012345

TUNING CAP 31

TUNING CAP 15

TUNING CAP 0

TUNING VOLTAGE (V)

kvco (MHz/V)

Typical Operating Range

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 6

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

Pin Descriptions

Pin Number Function Description

1AVDD DC Power Supply for analog circuitry.

2, 5, 6, 8, 9,

11 - 14, 18 - 22,

24, 26, 29, 34, 37, 38

N/C The pins are not connected internally; however, all data shown herein was measured

with these pins connected to RF/DC ground externally.

3VPPCP Power Supply for charge pump analog section

4CP Charge Pump Output

7VDDCP Power Supply for the charge pump digital section

10 RVDD Reference Supply

15 XREFP Reference Oscillator Input

16 DVDD3V DC Power Supply for Digital (CMOS) Circuitry

17 CEN Chip Enable. Connect to logic high for normal operation.

23 VTUNE VCO Varactor. Tuning Port Input.

25 VCC2 VCO Analog Supply 2

27 VCC1 VCO Analog Supply 1

28 RFOUT RF Doubler Output

30 SEN PLL Serial Port Enable (CMOS) Logic Input

31 SDI PLL Serial Port Data (CMOS) Logic Input

32 SCK PLL Serial Port Clock (CMOS) Logic Input

33 LD_SDO Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO)

35 VCCHF DC Power Supply for Analog Circuitry

36 VCCPS DC Power Supply for Analog Prescaler

39 VCCPD DC Power Supply for Phase Detector

40 BIAS

External bypass decoupling for precision bias circuits.

Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot

drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A,

normal 10MΩ DVM will read erroneously.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 7

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

Outline Drawing

Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]

HMC836LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H836

XXXX

[1] 4-Digit lot number XXXX

Package Information

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS].

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE

4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST

BE SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOTE FOR

SUGGESTED PCB LAND PATTERN.

Absolute Maximum Ratings

AVDD, RVDD, DVDD3V, VCCPD,

VCCHF, VCCPS -0.3V to +3.6V

VPPCP, VD D C P, VC C1 -0.3V to +5.8V

VCC2 -0.3V to +5.5V

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to 125°C

Maximum Junction Temperature 125 °C

Thermal Resistance (RTH)

(junction to ground paddle) 20 °C/W

Reow Soldering

Peak Temperature 260°C

Time at Peak Temperature 40 sec

ESD Sensitivity (HBM) Class 1B

Stresses above those listed under Absolute Maximum

Ratings may cause permanent damage to the device.

This is a stress rating only; functional operation of the

device at these or any other conditions above those

indicated in the operational section of this specication

is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 8

Evaluation PCB

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

The circuit board used in the nal application should use RF circuit design techniques. Signal lines should have

50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the

ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and

bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.

Evaluation PCB Schematic

To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC836LP6CE from the

“Search by Part Number” pull down menu to view the product splash page.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 9

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

Item Description

J1, J2 PCB Mount SMA RF Connector

J3 Dual Row Terminal Strip

J4 - J6 Connector Header

C1, C15 - C17, C25 10 µF Capacitor, 0805 Pkg.

C2, C3, C6, C7, C11, C12,

C14, C18, C27, C43, C45 0.47 µF Capacitor, 0402 Pkg.

C4, C13 22 pF Capacitor, 0402 Pkg.

C5, C33 1000 pF Capacitor, 0402 Pkg.

C8 8.2 pF Capacitor, 0402 Pkg.

C19 - C24, C28, C30, C32, C34 0.1 µF Capacitor, 0402 Pkg.

C26 1.0 µF Capacitor, 0603 Pkg.

C35 3300 pF Capacitor, 0402 Pkg.

C36 270 pF Capacitor, 0402 Pkg.

C37, C38 68 pF Capacitor, 0402 Pkg.

C39 - C42, C44 4.7 µF Tantalum Capacitor, 0805 Pkg

C46 27 pF Capacitor, 0402 Pkg.

C47 47 pF Capacitor, 0402 Pkg.

R1, R2, R11, R15, R18, R19, R21, R24 Zero Ohm Resistor, 0402 Pkg.

R3, R4 1 Ohm Resistor, 0402 Pkg.

R6 1 MOhm Resistor, 0402 Pkg.

R8 22 Ohm Resistor, 0402 Pkg.

R12, R20, R29 51 Ohm Resistor, 0402 Pkg.

R13, R14, R30 220 kOhm Resistor, 0402 Pkg.

R22, R25 20 kOhm Resistor, 0402 Pkg.

R26 - R28 1k Ohm Resistor, 0402 Pkg.

R32, R33 0 Ohm Resistor, 0805 Pkg.

L1 10 nH Inductor, 0402 Pkg.

L2 68 Ohm Resistor, 0402 Pkg.

L3 4.7 nH Inductor, 0402 Pkg.

L4 1.5 nH Inductor, 0402 Pkg.

TP3, TP4 Test Point PC Compact SMT

U1 HMC836LP6CE PLL with Integrated VCO

U2 HMC860LP3E

Low Noise Quad Linear Regulator

Y1 3.3V, 50 MHz VCXO Crystal Oscillator

PCB [2] 127729 Evaluation Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4

List of Materials for Evaluation PCB 127832 [1]

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

PLLS w/ Integrated VCO - SMt

7 - 10

HMC836LP6CE

v07.1211

FRACTIONAL-N PLL WITH

INTEGRATED VCO, 3365 - 3705 MHz

Notes:

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D