CWR06HC225KPA/PR - Vishay Presicion Group

CWR06

www.vishay.com Vishay Sprague

Revision: 27-Feb-13 1Document Number: 40009

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Solid Tantalum Surface Mount Capacitors TANTAMOUNT®

Conformal Coated, Military MIL-PRF-55365/4 Qualified

FEATURES

• Weibull failure rates B, C, D, T

Exponential failure rates M, P, R, S

• Tape and reel available per EIA 481

• Termination finishes available: Gold plate,

solder plated, solder fused and hot solder

dipped

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

Note

*Lead (Pb)-containing terminations are not RoHS-compliant.

Exemptions may apply.

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 125 °C

(above 85 °C, voltage derating is required)

Capacitance Range: 0.10 μF to 100 μF

Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %

Voltage Rating: 4 VDC to 50 VDC

Notes

(1) Contact marketing for availability of Weibull D failure rate for 50 V ratings

(2) T level requires surge current option “C”. Capacitors are recommended for “space applications”. Shipped in tape and reel/or waffle

packaging only.

Note

• When solder coated terminations are required, add 0.015" [0.38 mm] to termination dimension tolerances

ORDERING INFORMATION

CWR06 D B 155 K B A /TR

TYPE VOLTAGE TERMINATION

FINISH

CAPACITANCE CAPACITANCE

TOLERANCE

FAILURE RATE

%/1000 h

SURGE CURRENT

(OPTIONAL)

PACKAGING

C = 4 V

D = 6 V

F = 10 V

H = 15 V

J = 20 V

K = 25 V

M = 35 V

N = 50 V

B = Gold

C = Hot solder

dipped

H = Solder

plated

K = Solder

fused

This is expressed in

picofarads. The first

two digits are the

significant figures.

The third is the

number of zeros to

follow.

J = ± 5 %

K = ± 10 %

M = ± 20 %

M = 1.0

P = 0.1

R = 0.01

S = 0.001

B = 0.1

C = 0.01

D = 0.001

(1)

T = 0.01

(2)

A = 3 cycles at + 25 °C

B = 3 cycles at - 55 °C

and + 85 °C

C = 3 cycles at - 55 °C

and + 85 °C

(before Weibull grading)

Blank = Bulk,

plastic tray

/FA = Waffle

pack

/PR =

100 pcs reel

/HR = Half reel

/TR = Full reel

DIMENSIONS in inches [millimeters]

CASE CODE L W H P T1T2 (max.)

A 0.100 ± 0.015

[2.54 ± 0.38] 0.050 ± 0.015

[1.27 ± 0.38] 0.050 ± 0.015

[1.27 ± 0.38] 0.030 ± 0.005

[0.76 ± 0.13] 0.005

[0.13] 0.015

[0.38]

B 0.150 ± 0.015

[3.81 ± 0.38] 0.050 ± 0.015

[1.27 ± 0.38] 0.050 ± 0.015

[1.27 ± 0.38] 0.030 ± 0.005

[0.76 ± 0.13] 0.005

[0.13] 0.015

[0.38]

C 0.200 ± 0.015

[5.08 ± 0.38] 0.050 ± 0.015

[1.27 ± 0.38] 0.050 ± 0.015

[1.27 ± 0.38] 0.030 ± 0.005

[0.76 ± 0.13] 0.005

[0.13] 0.015

[0.38]

D 0.150 ± 0.015

[3.81 ± 0.38] 0.100 ± 0.015

[2.54 ± 0.38] 0.050 ± 0.015

[1.27 ± 0.38] 0.030 ± 0.005

[0.76 ± 0.13] 0.005

[0.13] 0.015

[0.38]

E 0.200 ± 0.015

[5.08 ± 0.38] 0.100 ± 0.015

[2.54 ± 0.38] 0.050 ± 0.015

[1.27 ± 0.38] 0.030 ± 0.005

[0.76 ± 0.13] 0.005

[0.13] 0.015

[0.38]

F 0.220 ± 0.015

[5.59 ± 0.38] 0.135 ± 0.015

[3.43 ± 0.38] 0.070 ± 0.015

[1.78 ± 0.38] 0.030 ± 0.005

[0.76 ± 0.13] 0.005

[0.13] 0.015

[0.38]

G 0.265 ± 0.015

[6.73 ± 0.38] 0.110 ± 0.015

[2.79 ± 0.38] 0.110 ± 0.015

[2.79 ± 0.38] 0.050 ± 0.005

[1.27 ± 0.13] 0.005

[0.13] 0.015

[0.38]

H 0.285 ± 0.015

[7.24 ± 0.38] 0.150 ± 0.015

[3.81 ± 0.38] 0.110 ± 0.015

[2.79 ± 0.38] 0.050 ± 0.005

[1.27 ± 0.13] 0.005

[0.13] 0.015

[0.38]

Weld and

dimple

projection

identies

anode (+)

terminal

T1 -

T2 (max.)

CWR06

www.vishay.com Vishay Sprague

Revision: 27-Feb-13 2Document Number: 40009

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATINGS AND CASE CODES

μF 4 V 6 V 10 V 15 V 20 V 25 V 35 V 50 V

0.10 A

0.15 A

0.22 AB

0.33 AB

0.47 ABC

0.68 A B B C D

1.0 A B C D E

1.5 A B C D E F

2.2 A B C D E F

3.3 B C D E F G

4.7 B C D E F G H

6.8 C D E F G H

10 D E F G

15 E F G H

22 F G H

33 F G H

47 G H

68 G H

100 H

STANDARD RATINGS

CAPACITANCE

(μF)

CASE

CODE PART NUMBER

MAX. DCL (μA) AT MAX. DF (%) AT MAX. ESR

AT + 25 °C

100 kHz

()

+ 25 °C + 85 °C + 125 °C + 25 °C + 85 °C

+ 125 °C - 55 °C

4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C

2.2 A CWR06C(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0

4.7 B CWR06C(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0

6.8 C CWR06C(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5

10 D CWR06C(1)106(2)(3)(4)(5) 1.0 10 12 8 8 10 4.0

15 E CWR06C(1)156(2)(3)(4)(5) 1.0 10 12 8 10 12 3.5

33 F CWR06C(1)336(2)(3)(4)(5) 2.0 20 24 8 10 12 2.2

68 G CWR06C(1)686(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1

100 H CWR06C(1)107(2)(3)(4)(5) 4.0 40 48 10 12 12 0.9

6 VDC AT + 85 °C; 4 VDC AT + 125 °C

1.5 A CWR06D(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0

3.3 B CWR06D(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0

4.7 C CWR06D(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5

6.8 D CWR06D(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5

10 E CWR06D(1)106(2)(3)(4)(5) 1.0 10 12 8 10 12 3.5

22 F CWR06D(1)226(2)(3)(4)(5) 2.0 20 24 8 10 12 2.2

47 G CWR06D(1)476(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1

68 H CWR06D(1)686(2)(3)(4)(5) 4.0 40 48 10 12 12 0.9

Notes

• Part number definitions:

(1) Termination finish: B, C, H, K

(2) Capacitance tolerance: J, K, M

(3) Failure rate: B, C, D, M, P, R, S, T

(4) Surge current (optional): A, B, C

(5) Packaging: Blank, /FA, /HR, /PR, /TR

(1) 5 % tolerance is not available for the 0.33 μF/50 V design

CWR06

www.vishay.com Vishay Sprague

Revision: 27-Feb-13 3Document Number: 40009

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

10 VDC AT + 85 °C; 7 VDC AT + 125 °C

1.0 A CWR06F(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0

2.2 B CWR06F(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0

3.3 C CWR06F(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5

4.7 D CWR06F(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5

6.8 E CWR06F(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 3.5

15 F CWR06F(1)156(2)(3)(4)(5) 2.0 20 24 8 8 10 2.5

33 G CWR06F(1)336(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1

47 H CWR06F(1)476(2)(3)(4)(5) 5.0 50 60 10 12 12 0.9

15 VDC AT + 85 °C; 10 VDC AT + 125 °C

0.68 A CWR06H(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0

1.5 B CWR06H(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0

2.2 C CWR06H(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5

3.3 D CWR06H(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 5.0

4.7 E CWR06H(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0

10 F CWR06H(1)106(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5

22 G CWR06H(1)226(2)(3)(4)(5) 4.0 40 48 6 8 8 1.1

33 H CWR06H(1)336(2)(3)(4)(5) 5.0 50 60 8 8 10 0.9

20 VDC AT + 85 °C; 13 VDC AT + 125 °C

0.47 A CWR06J(1)474(2)(3)(4)(5) 1.0 10 12 8 8 10 16.0

0.68 B CWR06J(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 14.0

1.0 B CWR06J(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0

1.5 C CWR06J(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 6.0

2.2 D CWR06J(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 5.0

3.3 E CWR06J(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0

6.8 F CWR06J(1)685(2)(3)(4)(5) 2.0 20 24 6 8 8 2.4

15 G CWR06J(1)156(2)(3)(4)(5) 3.0 30 36 6 8 8 1.1

22 H CWR06J(1)226(2)(3)(4)(5) 4.0 40 48 6 8 8 0.9

25 VDC AT + 85 °C; 17 VDC AT + 125 °C

0.33 A CWR06K(1)334(2)(3)(4)(5) 1.0 10 12 6 8 8 15.0

0.68 B CWR06K(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 10.0

1.0 C CWR06K(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5

1.5 D CWR06K(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5

2.2 E CWR06K(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 3.5

4.7 F CWR06K(1)475(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5

6.8 G CWR06K(1)685(2)(3)(4)(5) 2.0 20 24 6 8 8 1.2

10 G CWR06K(1)106(2)(3)(4)(5) 3.0 30 36 6 8 8 1.4

15 H CWR06K(1)156(2)(3)(4)(5) 4.0 40 48 6 8 8 1.0

STANDARD RATINGS

CAPACITANCE

(μF)

CASE

CODE PART NUMBER

MAX. DCL (μA) AT MAX. DF (%) AT MAX. ESR

AT + 25 °C

100 kHz

()

+ 25 °C + 85 °C + 125 °C + 25 °C + 85 °C

+ 125 °C - 55 °C

Notes

• Part number definitions:

(1) Termination finish: B, C, H, K

(2) Capacitance tolerance: J, K, M

(3) Failure rate: B, C, D, M, P, R, S, T

(4) Surge current (optional): A, B, C

(5) Packaging: Blank, /FA, /HR, /PR, /TR

(1) 5 % tolerance is not available for the 0.33 μF/50 V design

CWR06

www.vishay.com Vishay Sprague

Revision: 27-Feb-13 4Document Number: 40009

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

35 VDC AT + 85 °C; 23 VDC AT + 125 °C

0.22 A CWR06M(1)224(2)(3)(4)(5) 1.0 10 12 6 8 8 24.0

0.47 B CWR06M(1)474(2)(3)(4)(5) 1.0 10 12 6 8 8 17.0

0.68 C CWR06M(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 10.0

1.0 D CWR06M(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5

1.5 E CWR06M(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5

3.3 F CWR06M(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 2.5

4.7 G CWR06M(1)475(2)(3)(4)(5) 2.0 20 24 6 8 8 1.5

6.8 H CWR06M(1)685(2)(3)(4)(5) 3.0 30 36 6 8 8 1.3

50 VDC AT + 85 °C; 33 VDC AT + 125 °C

0.10 A CWR06N(1)104(2)(3)(4)(5) 1.0 10 12 6 8 8 22.0

0.15 A CWR06N(1)154(2)(3)(4)(5) 1.0 10 12 6 8 8 25.0

0.22 B CWR06N(1)224(2)(3)(4)(5) 1.0 10 12 6 8 8 17.0

0.33 B (1) CWR06N(1)334(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0

0.47 C CWR06N(1)474(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0

0.68 D CWR06N(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 7.0

1.0 E CWR06N(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.0

1.5 F CWR06N(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0

2.2 F CWR06N(1)225(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5

3.3 G CWR06N(1)335(2)(3)(4)(5) 2.0 20 24 6 8 8 2.0

4.7 H CWR06N(1)475(2)(3)(4)(5) 3.0 30 36 6 8 8 1.5

STANDARD RATINGS

CAPACITANCE

(μF)

CASE

CODE PART NUMBER

MAX. DCL (μA) AT MAX. DF (%) AT MAX. ESR

AT + 25 °C

100 kHz

()

+ 25 °C + 85 °C + 125 °C + 25 °C + 85 °C

+ 125 °C - 55 °C

Notes

• Part number definitions:

(1) Termination finish: B, C, H, K

(2) Capacitance tolerance: J, K, M

(3) Failure rate: B, C, D, M, P, R, S, T

(4) Surge current (optional): A, B, C

(5) Packaging: Blank, /FA, /HR, /PR, /TR

(1) 5 % tolerance is not available for the 0.33 μF/50 V design

CWR06

www.vishay.com Vishay Sprague

Revision: 27-Feb-13 5Document Number: 40009

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) A0, B0, K0, are determined by the maximum dimensions to the ends of the terminals extending from the component body and/or the body

dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the

cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent

rotation of the component within the cavity of not more than 20°.

(2) Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide

“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum.

(3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed

cavities or to the edge of the cavity whichever is less.

(4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier

tape between the embossed cavity or to the edge of the cavity whichever is less.

(5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossement. Dimensions of

embossement location shall be applied independent of each other.

(6) B1 dimension is a reference dimension tape feeder clearance only.

TAPE AND REEL PACKAGING in inches [millimeters]

Note

• Metric dimensions will govern. Dimensions in inches are rounded and for reference only.

Tape and reel specifications: All case sizes are

available on plastic embossed tape per EIA-481.

Standard reel diameter is 7" (178 mm).

CARRIER TAPE DIMENSIONS in inches [millimeters]

CASE CODE TAPE SIZE B1 (max.) D1 (min.) F P1T2 (max.) W

A 8 mm 0.179 [4.55] 0.039

[1.0]

0.138 ± 0.002

[3.5 ± 0.05]

0.157 ± 0.004

[4.0 ± 0.1]

0.098

[2.5]

0.315 ± 0.004

[8.0 ± 0.10]

B, C, D, E 12 mm 0.323 [8.2] 0.059

[1.5]

0.217 ± 0.002

[5.5 ± 0.05]

0.157 ± 0.004

[4.0 ± 0.1]

0.256

[6.5]

0.472 ± 0.012

[12.0 ± 0.30]

F12 mm

double pitch 0.323 [8.2] 0.059

[1.5]

0.217 ± 0.002

[5.5 ± 0.05]

0.315 ± 0.004

[8.0 ± 0.10]

0.256

[6.5]

0.472 ± 0.012

[12.0 ± 0.30]

G, H 16 mm 0.476 [12.1] 0.059

[1.5]

0.295 ± 0.004

[7.5 ± 0.1]

0.315 ± 0.004

[8.0 ± 0.10]

0.315

[8.0]

0.642 max.

[16.3] max.

0.004 [0.10]

max.

(max.)

B1 (max.) (6)

0.024

[0.600]

max.

10 pitches cumulative

tolerance on tape

± 0.008 [0.200]

Embossment

0.069 ± 0.004

[1.75 ± 0.10]

D1 (min.) for components

0.079 x 0.047 [2.0 x 1.2] and larger (5)

Maximum

USER DIRECTION

OF FEED

Center lines

of cavity

0.030 [0.75]

min. (3)

0.030 [0.75]

min. (4)

0.079 ± 0.002

[2.0 ± 0.05]

0.157 ± 0.004

[4.0 ± 0.10]

0.059 + 0.004 - 0.0

[1.5 + 0.10 - 0.0]

Maximum

component

rotation

(Side or front sectional view)

20°

For tape feeder

reference only

including draft.

Concentric around B0

Deformation

between

embossments

Top

cover

tape

Top

cover

tape

cavity size (1)

DIRECTION OF FEED

Cathode (-)

Anode (+)

Bending radius (2)

R minimum:

8 mm = 0.984" (25 mm)

12 mm and 16 mm = 1.181" (30 mm)

min.

20° maximum

component rotation

Typical

component

cavity

center line

Typical

component

center line

(Top view)

0.9843 [250.0]

Tape

3.937 [100.0]

0.039 [1.0]

max.

0.039 [1.0]

max.

Camber

Allowable camber to be 0.039/3.937 [1/100]

(Top view)

Non-cumulative over 9.843 [250.0]

CWR06

www.vishay.com Vishay Sprague

Revision: 27-Feb-13 6Document Number: 40009

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Bulk capacitors are shipped in plastic trays

(2) T level capacitors are only shipped in tape and reel/or waffle packaging. Contact factory for waffle pack quantities

STANDARD PACKAGING QUANTITY

CASE CODE

QUANTITY (PCS/REEL) BULK, PLASTIC

TRAY QUANTITY

(PCS)

7", FULL REEL

(/TR)

7", HALF REEL

(/HR)

7", PARTIAL REEL

(/PR)

A, B, C, D, E 2500 1250 100 75

F 1000 500 100 75

G 600 300 100 60

H 600 300 100 50

PAD DIMENSIONS in inches [millimeters]

CASE CODE WIDTH (A) PAD METALLIZATION (B) SEPARATION (C)

A 0.065 [1.6] 0.050 [1.3] 0.040 [1.0]

B 0.065 [1.6] 0.070 [1.8] 0.055 [1.4]

C 0.065 [1.6] 0.070 [1.8] 0.120 [3.0]

D 0.115 [2.9] 0.070 [1.8] 0.070 [1.8]

E 0.115 [2.9] 0.070 [1.8] 0.120 [3.0]

F 0.150 [3.8] 0.070 [1.8] 0.140 [3.6]

G 0.125 [3.2] 0.070 [1.8] 0.170 [4.3]

H 0.165 [4.2] 0.090 [2.3] 0.170 [4.3]

POWER DISSIPATION

CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR

A0.060

B, C 0.075

D, E 0.085

F0.110

G0.120

H0.150

PRODUCT INFORMATION

Conformal Coated Guide

www.vishay.com/doc?40150

Pad Dimensions

Package Dimensions

Moisture Sensitivity www.vishay.com/doc?40135

SELECTOR GUIDES

Solid Tantalum Selector Guide www.vishay.com/doc?49053

Solid Tantalum Chip Capacitors www.vishay.com/doc?40091

FAQ

Frequently Asked Questions www.vishay.com/doc?40110

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.