https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Installation ground terminal block, Screw connection, cross section: 0.2 mm - 4 mm, AWG: 24 - 12, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15 Why buy this product The other types in the PIK range support all other circuit versions encountered in practice For example, combining the PIK 4-PE/L/NT and the PIK 4-L/L enables a three-phase circuit to be wired on a design width of 12.4 mm. This represents a space saving of 18.6 mm compared to conventional wiring with single-level installation terminal blocks. Key Commercial Data Packing unit 1 STK GTIN GTIN 4017918061265 Weight per Piece (excluding packing) 22.844 g Custom tariff number 85369010 Country of origin Greece Technical data General Number of levels 3 Number of connections 5 Nominal cross section 4 mm Color gray Insulating material PA Flammability rating according to UL 94 V2 Rated surge voltage 4 kV 07/21/2018 Page 1 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Technical data General Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W (the value is multiplied when connecting multiple levels) Maximum load current 32 A (with 4 mm conductor cross section) Nominal current IN 32 A Nominal voltage UN 400 V (phase conductor/phase conductor) 250 V (phase conductor/PE) 250 V (phase conductor/N) Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Relative insulation material temperature index (Elec., UL 746 B) 130 C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 C Static insulating material application in cold -60 C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm End cover width 1.5 mm Length 88 mm Height NS 35/7,5 51.5 mm Height NS 35/15 59 mm Connection data 07/21/2018 Page 2 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Technical data Connection data Note Please observe the current carrying capacity of the DIN rails. Connection method Screw connection Connection in acc. with standard IEC 60947-7-1/IEC 60947-7-2 Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 4 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 4 mm Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm 2 conductors with same cross section, solid min. 0.2 mm 2 conductors with same cross section, solid max. 1.5 mm 2 conductors with same cross section, stranded min. 0.2 mm 2 conductors with same cross section, stranded max. 1 mm 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm sleeve, max. 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm Stripping length 9 mm Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Standards and Regulations Connection in acc. with standard CUL IEC 60947-7-1/IEC 60947-7-2 Flammability rating according to UL 94 V2 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 07/21/2018 Page 3 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141118 eCl@ss 6.0 27141125 eCl@ss 7.0 27141125 eCl@ss 8.0 27141125 ETIM ETIM 2.0 EC001329 ETIM 3.0 EC001329 ETIM 4.0 EC001329 ETIM 5.0 EC001329 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Accessories Accessories DIN rail 07/21/2018 Page 4 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver 07/21/2018 Page 5 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver 07/21/2018 Page 6 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver 07/21/2018 Page 7 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray 07/21/2018 Page 8 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray End cover End cover - D-PIK 4 - 2714080 End cover, length: 88 mm, width: 1.5 mm, color: gray 07/21/2018 Page 9 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories Insulating sleeve Bridge bar isolator - IS-K 4 - 1302338 Bridge bar isolator, color: gray Labeled terminal marker Zack Marker strip, flat - ZBF 6 CUS - 0825027 Zack Marker strip, flat, Strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm Marker for terminal blocks - UC-TMF 6 CUS - 0824646 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm Marker for terminal blocks - UCT-TMF 6 CUS - 0829665 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm Zack Marker strip, flat - ZBF 6,LGS:FORTL.ZAHLEN - 0808749 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm 07/21/2018 Page 10 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories Zack Marker strip, flat - ZBF 6,QR:FORTL.ZAHLEN - 0808765 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm Zack Marker strip, flat - ZBF 6,LGS:GERADE ZAHLEN - 0810834 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm Zack Marker strip, flat - ZBF 6,LGS:UNGERADE ZAHLEN - 0810876 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm Partition plate 07/21/2018 Page 11 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories Partition plate - ATP-PIK - 2714145 Partition plate, length: 95 mm, width: 1.5 mm, height: 57 mm, color: gray Screw bridge Jumper - ISSBI 10- 6 - 0301505 Jumper, pitch: 6 mm, number of positions: 10, color: silver Fixed bridge - FBI 100- 6 - 0201650 Fixed bridge, pitch: 6 mm, number of positions: 100, color: silver Fixed bridge - FBI 10- 6 - 0203250 Fixed bridge, pitch: 6 mm, number of positions: 10, color: silver Fixed bridge - FBI 20- 6 - 0201867 Fixed bridge, pitch: 6 mm, number of positions: 20, color: silver 07/21/2018 Page 12 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Terminal marking Marker card - SBS 6:UNBEDRUCKT - 1007222 Marker card, Card, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: snap into tall marker groove, snap into flat marker groove, for terminal block width: 6 mm, lettering field size: 6 x 6.1 mm Zack Marker strip, flat - ZBF 6:UNBEDRUCKT - 0808710 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm Marker for terminal blocks - UC-TMF 6 - 0818140 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 5.1 mm Marker for terminal blocks - UCT-TMF 6 - 0828746 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, BLUEMARK LED, TOPMARK NEO, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm 07/21/2018 Page 13 / 14 https://www.phoenixcontact.com/us/products/2714019 Installation ground terminal block - PIK 4-PE/L/N - 2714019 Accessories Phoenix Contact 2018 (c) - all rights reserved http://www.phoenixcontact.com 07/21/2018 Page 14 / 14