NBB75DSI
Isolated BNC chassis connector, solder version in nickel D-shape
housing
Neutrik's BNC chassis connectors offer a true 75 Ω design for
serial and digital (HD) signals. The machined brass connector
body provides an extremely rugged and non-abrasive
connection over long term use and is in addition recessed and
therefore well protected in a D-shape housing (audio industry
standard).
Features & Benefits
Gold plated center contact
•True 75 Ω design meets the stringent HD
requirements
•
Isolated panel mount (solves potential grounding
problems and prevents common-mode influence with
other connections conducted over the same panel
ground potential)
•Standard D-shape housing - provides flush mounting
and protection from demage
•
Color coding possible
•
NBB75DSI 1/3
Technical Information
Product
Title NBB75DSI
Connection Type BNC 75 Ω
Gender female
Electrical
Signal Type HD, SDI, Video, AES/EBU, Composit, YUV, RGB, RGBH,
RGBHV
Contact resistance ≤ 3 mΩ (inner)
Contact resistance ≤ 2 mΩ (outer)
Dielectric strength 1,5 kVdc
Impedance 75 Ω
Insulation resistance > 5 GΩ
Rated voltage <50 V
VSWR ≤1.03/>37 dB up to 1 GHz
≤1.05/>32 dB up to 2 GHz
≤1.08/>28 dB up to 3 Ghz
Mechanical
Insertion force < 25 N
Lifetime > 1000 mating cycles
Wiresize
Wiring Solder contacts
Locking device Bayonett
Mounting direction Front mounting
Chassis shape D
NBB75DSI 2/3
Material
Contacts Brass (CuZn39Pb3), 0.2 µm AuCo (Center contact)
Insert PTFE
Shell Polyacetal (POM) (Insulation Sheell)
Shell plating Optalloy®
D-Shape housing Zinc diecast (ZnAl4Cu1) gal Ni plating
Environmental
Temperature range -30 °C to +85 °C
NBB75DSI 3/3
