25WAC-DC High Reliability IndustrialAdaptor GST25A series
■Features ■Applications
■Model Encoding
-A05GST P1J25
Series name
Output wattage
IEC320-C14 AC inlet
Output voltage
■Description
File Name:GST25A-SPEC 2015-06-24
Consumer electronic devices
Telecommunication devices
Office facilities
Industrial equipments
Universal AC input / Full range
3 pole AC inlet IEC320-C14
No load power consumption< 0.075W
Energy efficiency Level VI
Comply with EISA 2007/DoE,NRCan,
AU/NZ MEPS,EU ErP and CoC Version 5
Class power (with earth pin)Ⅰ
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
Pass LPS
High operating temperature up to +70℃
LED indicator for power on
3 years warranty
GST25A is a highly reliable, 25W desktop style single-output green adaptor series. This product is a class Ⅰ
power unit (with FG), equipped with a standard IEC320-C14 AC inlet and adopting the input range from
85VAC to 264VAC. The entire series supplies different models with output voltages ranging between
5VDC and 48VDC that can satisfy the demands for various types of consumer electronic devices.
With the efficiency up to 89% and the extremely low no-load power consumption below 0.075W, GST25A is
Code of Conduct(CoC) Version 5. The supreme feature allows the adaptor to save the energy when it is
either under the operating mode or the standby mode. The entire series utilizes the 94V-0 flame retardant
plastic case.GST25A is certified for the international safety regulations.
compliant with USA EISA 2007/DoE, Canada NRCan, Australia and New Zealand MEPS, EU ErP, and
{
P1J : Plug for standard model, 2.1 5.5 11mm, c+, tuning fork typeψψ××
DC plug type
Optional plug type available by customer requested
SPECIFICATION
25WAC-DC High Reliability IndustrialAdaptor GST25A series
File Name:GST25A-SPEC 2015-06-24
GST25A05-P1J
GST25A07-P1J
GST25A09-P1J
GST25A12-P1J
GST25A15-P1J
GST25A18-P1J
GST25A24-P1J
GST25A28-P1J
GST25A48-P1J
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE Note.2
RATED CURRENT
CURRENT RANGE
RATED POWER (max.)
RIPPLE & NOISE (max.) Note.3
OUTPUT
SETUP, RISE, HOLD UP TIME
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT
INPUT
ENVIRONMENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT(max.)
SAFETY STANDARDS
SAFETY &
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
PROTECTION
5V
GST25A05
7.5V
GST25A07
9V
GST25A09
12V
GST25A12
15V
GST25A15
18V
GST25A18
24V
GST25A24
28V
GST25A28
48V
GST25A48
80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p
VOLTAGE TOLERANCE Note.4
LINE REGULATION Note.5
LOAD REGULATION Note.6
±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0%
±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0%
47 ~ 63Hz
0.75mA / 240VAC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:4242VDC, I/P-FG:2121VDC
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
674.55Khrs min. MIL-HDBK-217F(25 )℃
-30 ~ +70 (Refer to "Derating Curve")℃
20% ~ 90% RH non-condensing
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
93*54*36mm (L*W*H)
209g; 60pcs/13.5Kg/1.12CUFT
CONNECTOR
PLUG
CABLE
OVERLOAD
OVER VOLTAGE
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
4.0A 2.93A 2.55A 2.08A 1.66A 1.38A 1.04A 0.89A 0.52A
0 ~ 4.0A 0 ~ 2.93A 0 ~ 2.55A 0 ~ 1.66A 0 ~ 1.38A 0 ~ 1.04A
0 ~ 0.89A
0 ~ 0.52A
20W 22W 23W 25W
0 ~ 2.08A
25W 25W 25W 25W 25W
Protection type : Clamp by zener diode
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
EMC IMMUNITY
EMC EMISSION
See page 3,4 ; Other type available by customer requested
See page 3,4 ; Other type available by customer requested
80mVp-p
85 ~ 264VAC
81.5% 84.5% 85% 86.5% 87% 87% 88% 88% 89%
110 ~ 140% rated output voltage
1000ms, 30ms, 50ms/230VAC 1500ms, 30ms, 15ms/115VAC at full load
0.6A / 115VAC 0.35A / 230VAC
VOLTAGE RANGE Note.7
EMC
(Note. 8)
UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943, PSE J60950-1 approved
-40 ~ +85 , 10 ~ 95% RH℃
±℃℃0.03% / (0 ~ 50 )
35A / 115VAC 65A / 230VAC
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. ℃
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 10% to 100% rated load.
7.Derating may be needed under low input voltage. Please check the derating curve for more details.
8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
Compliance to EN55022 class B EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, , GB9254, GB17625.1
Derating Curve Static Characteristics
Mechanical Specification
LOAD (%)
POWER LED
70 10mm±
35 10mm±
11 0.5mm±
NAME PLATE
UL2468 16AWG 1000 50mm for 5~12V±
-V not connected toAC FG
InsideOutside
Plug Assignment
Standard plug: P1J
36
93
54
ID 2.1 x OD 5.5
C"+"
P/N OUTPUT
P1J
CENTER +
85 10095 120110 160140 200180 240220 264
85
100
80
70
60
50
40
LOAD (%)
-30 10 20 30 40
50
100
50 60 70
AMBIENT TEMPERATURE ( )℃INPUT VOLTAGE (VAC) 60Hz
25WAC-DC High Reliability IndustrialAdaptor GST25A series
File Name:GST25A-SPEC 2015-06-24
Unit:mm
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
25WAC-DC High Reliability IndustrialAdaptor GST25A series
File Name:GST25A-SPEC 2015-06-24
POWER LED
70 10mm±
11 0.5mm±
NAME PLATE
UL1185 18AWG 1800 50mm for 15~48V±
-V not connected toAC FG
InsideOutside
Plug Assignment
Standard plug: P1J
36
93
54
ID 2.1 x OD 5.5
C"+"
P/N OUTPUT
P1J
CENTER +
