107-68888 Packaging Specification 13Nov09 Rev B INDUSTRIAL MINI I/O ASSY 1. PURPOSE Define the packaging specifiction and packaging method of INDUSTRIAL MINI I/O ASSY. INDUSTRIAL MINI I/O ASSY 2. APPLICABLE PRODUCT Part Number Description 2040537-1/11 INDUSTRIAL MINI I/O CONN 1.27mmPITCH HDR ASSY (DIP/H-TYPE) 8POS 1981386-1 INDUSTRIAL MINI I/O HDR ASSY D-SHAPE 2 1981080-1 INDUSTRIAL MINI I/O HDR ASSY 1871283-1 IE CORE 4P ASSY 1871295-1 IE CORE 8P ASSY 1871739-1/3 IE CASE ASSY IP20 2040231-1 CASE SUBASSY IE SHORT COMPACT TYPE 2069496-1 INDUSTRIAL MINI I/O H-HDR ASSY MIT DIP 1 3. PACKAGING MATERIAL Usage Package INNER MIDDLE OUTER 2040537-1/11 2069496-1 1981080-1 1981386-1 1871283-1 1871295-1 1871739-1/3 2040231-1 6/450 - - - 335x230x15.6 - 6/500 - - TRAY 335x230x20.3 - - 6/150 - 912145-2 TRAY 335x230x23.5 - - - 6/150 623853-1 tape25w 25w 6.5 MR/450 6.5 MR/500 6.5 MR/150 6.5 MR/150 3-912074-2 Foam 315x200x7 - 2/500 - 1/150 8-912068-9 Inner box 340x240x80 1/450 1/500 1/150 - 9-912135-7 Inner box 340x240x120 - - - 1/150 623865-4 Middle label 102x51 1/450 1/500 1/150 1/150 2-912011-8 Shipping box 411x327x195 1/900 1/1000 1/300 - 3-912011-0 Shipping box 411x327x279 - - - 1/300 7-912079-1 PARTITION CELL 399x315x168 1/900 1/1000 1/300 1/300 912084-7 Air cap 895X345X4 1/900 1/1000 1/300 1/300 912084-8 Air cap 1000X292X4 1/900 1/1000 1/300 1/300 623865-1 Outer label 102x102 1/900 1/1000 1/300 1/300 Part No. Description Size(mm) 1-912145-5 TRAY 335x230x17 7-912129-7 TRAY 8-912129-3 DR CHK APVD Sam Wu Mickey Wen Ansin Yang Tyco Electronics AMP Guangdong Ltd. East Rongqi Road, Ronggui Town, Shunde, Foshan, Guangdong, P.R. China QR-ME-030B * Trademark | Indicates change 1 of 3 LOC FR 107-68888 3. PACKAGING MATERIAL Inner Middle Outer LABEL - 623865-4 623865-1 SEALING - Tape Tape 4. PACKAGING QUANTITY P/N Inner Middle Outer 2040537-1/11 2069496-1 90 pcs/tray 450 pcs/inner box 900 pcs/box 1981080-1 1981386-1 100 pcs/tray 500 pcs/inner box 1000 pcs/box 1871283-1 1871295-1 1871739-1/3 2040231-1 30 pcs/tray 150pcs/inner box 300 pcs/box 5. PACKING METHOD 5.1. Load connectors qty as 4 all oriented same way into tray. TRAY 5.2. Place another tray onto previous tray with products.and ensure the two trays are justification completely. TRAYTRAY 5.3. Stack 5 trays with connectors one by one & place an empty tray on the top as lid & wrap 6 stacked trays with tape. 5 TRAY TRAY,6TRAY 1 1 1 5.4. Set up an inner box. 5.5. Place a cushion on bottom of inner box, and ensure under edge of tray don't pin cushion. TRAY 2040537-1/11;2069496-1;1871283-1;1871295-1 5.6. Place 6pcs stack trays into the inner box and place 1 cushion on top of tray. 6 TRAY TRAY 2040537-1/11;2069496-1;1871283-1;1871295-1;1871739-1/3;2040231-1 Rev B QR-ME-030B 2 of 3 107-68888 5. PACKING METHOD 5.7. Close cover of the inner box, place tape on the middle of three sides. () 5.8. Place an inner label on the middle of cover of box. 5.9. Set up shipping box.and secure bottom flaps with tape. 5.10. Place partition into shipping box after folding brim along crease. 5.11. Wrap 2 inner boxes with two piece of air cap & into the partition. (912084-7/8) 5.12. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" Rev B QR-ME-030B 3 of 3