Model A150N50X4E Chip Termination 150 Watts, 50 Description The A150N50X4E is high performance Aluminum Nitride (AlN) chip termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant! Features: * RoHS Compliant * 150 Watts * DC - 3.0 GHz * AlN Ceramic * Non-Nichrome Resistive Element * Low VSWR * 100% Tested General Specifications Resistive Element Substrate Terminal Finish Operating Temperature Thick film AlN Ceramic Matte Tin over Nickel Barrier -50 to +200C (see de rating chart) Tolerance is 0.010", unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: Power: Frequency Range: Return Loss 50 Ohms, 2% 150 Watts DC -3.0 GHz 25dB DC - 2.0 GHz 20dB DC - 3.0 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model A150N50X4E Typical Performance: A150N50X4E A150N50X4E 110 0.00 100 90 70 60 0.50 130 -5.00 80 1.00 120 50 140 40 -10.00 150 Return Loss (dB) -15.00 160 30 0.20 20 -20.00 170 10 -25.00 180 -30.00 0.50 1.00 2.00 -0.20 0 0.00 -0.50 -35.00 -170 -10 -1.00 -40.00 -160 -45.00 -50.00 0.00 -20 -150 0.50 1.00 1.50 2.00 F [GHz] 2.50 3.00 3.50 -30 -140 -40 -130 -50 -120 -60 -110 Power De-rating: -100 -90 -80 -70 Mounting Footprint and Procedure: *Actual performance could be limited by the solder properties of the application 2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392