Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS 3336, LO 3336, LY 3336 Vorlaufige Daten fur OS-PCN-2004-005-A / Preliminary Data for OS-PCN-2004-005-A Besondere Merkmale Features * Gehausetyp: nicht eingefarbtes, klares 3 mm (T1) Gehause * Besonderheit des Bauteils: Lotspiee mit Aufsetzebene * Wellenlange: 633 nm (super-rot), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: 50 * Technologie: InGaAlP * optischer Wirkungsgrad: 11 lm/W (gelb, orange), 7 lm/W (super-rot) * Gruppierungsparameter: Lichtstarke * Lotmethode: Wellenloten (TTW) * Verpackung: Schuttgut, gegurtet lieferbar * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-B * package: colorless, clear 3 mm (T1) package * feature of the device: solder leads with stand-off * wavelength: 633 nm (super-red), 606 nm (orange), 587 nm (yellow) * viewing angle: 50 * technology: InGaAlP * optical efficiency: 11 lm/W (yellow, orange), 7 lm/W (super-red) * grouping parameter: luminous intensity * soldering methods: TTW soldering * packing: bulk, available taped on reel * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B Anwendungen Applications * Informationsanzeigen im Innen- und Auenbereich (z. B. im Verkehrsbereich) * optischer Indikator * Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u.a.) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten * indoor and outdoor displays (e.g. displays for traffic) * optical indicators * backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting (e.g. dashboard backlighting, etc.) * substitution of micro incandescent lamps * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire 2004-11-04 1 LS 3336, LO 3336, LY 3336 Bestellinformation Ordering Information Typ Type Emissions- Gehausefarbe farbe Lichtstarke1) Lichtstrom2) Seite 12 Seite 12 Color of Emission Luminous Intensity1) Luminous Flux2) page 12 page 12 IF = 20 mA IV (mcd) IF = 20 mA V (mlm) Color of Package Bestellnummer Ordering Code LS 3336-S1T2-1 LS 3336-T1U2-1 LS 3336-S1U2-1 super-red colorless clear 180 ... 450 280 ... 710 180 ... 710 470 (typ.) 740 (typ.) 670 (typ.) Q65110A1365 Q65110A1367 Q65110A1366 LO 3336-T1U2-24 LO 3336-U1V2-24 LO 3336-T1V2-24 orange colorless clear 280 ... 710 450 ... 1120 280 ... 1120 740 (typ.) 1180 (typ.) 1050 (typ.) Q65110A1338 Q65110A1340 Q65110A1339 LY 3336-S2U1-26 LY 3336-T2V1-26 LY 3336-S2V1-26 yellow colorless clear 224 ... 560 355 ... 900 224 ... 900 590 (typ.) 940 (typ.) 840 (typ.) Q65110A1400 Q65110A1402 Q65110A1401 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LY 3336-S2U1-26 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen S2, T1, T2 oder U1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LY 3336-S2U1-26 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, -4, -5 oder -6 enthalten ist (siehe Seite 5 fur nahere Information). Z.B.: LS 3336-S1T2-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LY 3336-S2U1-26 means that only one group S2, T1, T2 or U1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LY 3336-S2U1-26 means that only 1 wavelength group -2, -3, -4, -5 or -6 will be shippable (see page 5 for explanation). E.g. LS 3336-S1T2-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2004-11-04 2 LS 3336, LO 3336, LY 3336 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values LO, LS Einheit Unit LY Betriebstemperatur Operating temperature range Top - 55 ... + 100 C Lagertemperatur Storage temperature range Tstg - 55 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 100 C Durchlassstrom Forward current (TA=25C) IF 30 mA Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM Sperrspannung3) Seite 12 Reverse voltage3) page 12 (TA=25C) VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 80 mW Rth JA 500 K/W Rth JS 280 K/W Warmewiderstand 4) Seite 12 Thermal resistance4) page 12 Sperrschicht/Umgebung5) Seite 12 Junction/ambient5) page 12 Sperrschicht/Lotpad Junction/solder point 2004-11-04 3 1 0.2 A LS 3336, LO 3336, LY 3336 Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlange6) Seite 12 Dominant wavelength6) page 12 IF = 20 mA Symbol Symbol Werte Values Einheit Unit LS LO LY (typ.) peak 645 610 591 nm (min.) (typ.) (max.) dom dom dom 627 633 639 600 606* 609 580 587* 595 nm nm nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 50 50 50 Grad deg. Durchlassspannung7) Seite 12 Forward voltage7) page 12 IF = 20 mA (min.) (typ.) (max.) VF VF VF 1.8 2.0 2.3 1.85 2.0 2.35 1.9 2.0 2.4 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.13 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.05 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 2.0 - 1.7 - 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 7 11 11 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2004-11-04 4 LS 3336, LO 3336, LY 3336 Wellenlangengruppen (Dominantwellenlange)6) Seite 12 Wavelength Groups (Dominant Wavelength)6) page 12 Gruppe Group yellow orange Einheit Unit min. max. min. max. 2 580 583 600 603 nm 3 583 586 603 606 nm 4 586 589 606 609 nm 5 589 592 nm 6 592 595 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group S1 S2 T1 T2 U1 U2 V1 V2 Lichtstarke1) Seite 12 Luminous Intensity1) page 12 IV (mcd) 180 ... 224 224 ... 280 280 ... 355 355 ... 450 450 ... 560 560 ... 710 710 ... 900 900 ... 1120 Lichtstrom2) Seite 12 Luminous Flux2) page 12 V (mlm) 310 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) 1210 (typ.) 1520 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 4 bzw.6 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a lower family group, an upper family group or a grouping of all individual groups of 4 or 6 brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: U1-3 Example: U1-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength U1 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2004-11-04 5 LS 3336, LO 3336, LY 3336 Relative spektrale Emission2) Seite 12 Relative Spectral Emission2) page 12 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL00841 100 % Irel 80 V 60 yellow orange super-red 40 20 0 400 450 500 550 600 650 nm 700 2) Seite 12 Abstrahlcharakteristik Radiation Characteristic2) page 12 Irel = f (); TA = 25 C 40 30 20 0 10 50 OHL01646 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2004-11-04 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LS 3336, LO 3336, LY 3336 Durchlassstrom2) Seite 12 Forward Current2) page 12 IF = f (VF); TA = 25 C Relative Lichtstarke2) 8) Seite 12 Relative Luminous Intensity2) 8) page 12 IV/IV(20 mA) = f (IF); TA = 25 C OHL00232 10 2 mA 5 OHL00488 10 1 IV I V (20 mA) IF 10 1 10 0 5 10 0 10 -1 5 10 -1 super-red yellow orange 1 1.4 1.8 2.2 2.6 10 -2 10 0 3 V 3.4 10 1 mA IF VF 2) Seite 12 Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f (T ) Relative Lichtstarke Relative Luminous Intensity2) page 12 IV/IV(25 C) = f (Tj); IF = 20 mA OHL01013 35 OHL02378 2.0 IV I V (25 C) I F mA 30 TA 1.6 TS orange yellow super-red 25 1.2 20 15 0.8 orange yellow super-red 10 0.4 5 0 10 2 TA temp. ambient TS temp. solder point 0 20 40 60 0 -20 80 C 100 2004-11-04 0 20 40 60 C 100 Tj T 7 LS 3336, LO 3336, LY 3336 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LS, LO IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LY OHL00318 100 A IF 5 5 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 100 A OHL00316 tP tP IF D= T T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 5 5 tP D= T tP IF T 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LS, LO IF 100 A 5 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LY OHL01414 tP D= T tP IF IF 100 A 5 T OHL01415 tP D= T tP IF T D= 10 -1 5 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 5 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp 2004-11-04 D= tp 8 LS 3336, LO 3336, LY 3336 Mazeichnung9) Seite 12 Package Outlines9) page 12 Cathode 3.4 (0.134) 4.4 (0.173) 3.1 (0.122) 3.7 (0.146) 3.5 (0.138) 29.0 (1.142) 6.1 (0.240) 27.0 (1.063) 5.7 (0.224) o2.7 (0.106) 0.4 (0.016) 4.8 (0.189) o2.9 (0.114) 1.2 (0.047) 0.9 (0.035) 1.8 (0.071) 1.1 (0.043) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) 0.7 (0.028) 0.6 (0.024) 2.54 (0.100) spacing Area not flat kurzerer Lotspie short solder lead 150 mg Empfohlenes Lotpaddesign9) Seite 12 Recommended Solder Pad9) page 12 Wellenloten (TTW) TTW Soldering 0.4 (0.016) GEXY6045 4.8 (0.189) Kathodenkennung: Cathode mark: Gewicht / Approx. weight: 0.6 (0.024) 4 (0.157) OHLPY985 2004-11-04 9 LS 3336, LO 3336, LY 3336 Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2004-11-04 10 s 250 LS 3336, LO 3336, LY 3336 Revision History: 2007-03-01 Previous Version: 2004-09-01 Page Subjects (changes since last revision) Date of change 4 min./max. values for dominant wavelength 2004-11-04 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 10) page 12 may only be used in life-support devices or systems 11) page 12 with the express written approval of OSRAM OS 2004-11-04 11 LS 3336, LO 3336, LY 3336 Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) Rth erhoht sich um 13 K/W pro mm Beinchenlange. Minimale Beinchenlange, Entfernung vom Verguss ist 0 mm. 5) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm 2 je Pad) Minimale Beinchenlange, Entfernung vom Verguss ist 0 mm. 6) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 7) Durchlassspannungen werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 8) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 9) Mae werden wie folgt angegeben: mm (inch) 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 11) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 7) 2004-11-04 In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 9) Dimensions are specified as follows: mm (inch). A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 11) 12 Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltage are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V.' 8) 10) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. Each additional 1 mm of lead length increases Rth by 13 K/W. Minimum lead length, distance from resin 0 mm. RthJA results from mounting on PC board FR 4 (pad size 16 mm 2 per pad) Minimum lead length, distance from resin 0 mm. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.