PD-94275C 35SCGQ060 SCHOTTKY RECTIFIER 35 Amp. 60V HIGH EFFICIENCY SERIES Major Ratings and Characteristics Characteristics Description/Features 35SCGQ060 Units IF(AV) 35 A VRRM (Per Leg) 60 V IFSM @ tp = 8.3ms half-sine (Per Leg) 400 A VF @ 17.5Apk, TJ = 125C (Per Leg) 0.61 V -55 to 150 C TJ, Tstg Operating and storage The 35SCGQ060 center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of IR HiRel environments. It is packaged in the hermetic isolated TO-254AA package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical high frequency switching power supplies and resonant power converters. Full MILPRF-19500 quality conformance testing is available on source control drawings to TX, TXV and S quality levels. Hermetically Sealed Center Tap Low Forward Voltage Drop High Frequency Operation Guard Ring for Enhanced Ruggedness and Long term Reliability Light Weight CASE STYLE 0.12 [.005] 13.84 [.545] 13.59 [.535] 3.78 [.149] 3.53 [.139] 6.60 [.260] 6.32 [.249] A 20.32 [.800] 20.07 [.790] 17.40 [.685] 16.89 [.665] 1 C 2 2X B 3 14.48 [.570] 12.95 [.510] 3X 3.81 [.150] 13.84 [.545] 13.59 [.535] 1.27 [.050] 1.02 [.040] 0.84 [.033] MAX. 1.14 [.045] 0.89 [.035] 0.36 [.014] 3.81 [.150] B A NOTES: 1. 2. 3. 4. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES]. CONTROLLING DIMENSION: INCH. CONFORMS TO JEDEC OUTLINE TO-254AA. PIN ASSIGNMENTS 1 = DRAIN 2 = SOURCE 3 = GATE Case Outline and Dimensions - TO-254AA 1 2016-09-21 35SCGQ060 Voltage Ratings Part Number VR Max. DC Reverse Voltage (V) (Per Leg) 35SCGQ060 60 VRRM Max. Working Peak Reverse Voltage (V) (Per Leg) Absolute Maximum Ratings Parameter IF(AV) Max. Average Forward Current See Fig. 5 IFSM Max. Peak One Cycle Non - Repetitive Surge Current (Per Leg) Limits Units Conditions 35 A 50% duty cycle @ TC = 113C, square waveform 400 A @ tp = 8.3 ms half-sine Limits Units 0.64 V @ IF = 17.5A 0.82 V @ IF = 35A 0.61 V @ IF = 17.5A 0.86 V @ IF = 35A 0.61 V @ IF = 17.5A 0.93 V @ IF = 35A 0.3 mA TJ = 25C 40 mA TJ = 100C 180 mA TJ = 125C Electrical Specifications Parameter VFM IRM Max. Forward Voltage Drop (Per Leg) See Fig. 1 Max. Reverse Leakage Current (Per Leg) See Fig. 2 Conditions TJ = -55C TJ = 25C TJ = 125C VR = rated VR CT Max. Junction Capacitance (Per Leg) 1520 pF VR = 5VDC (1MHz, 25C) LS Typical Series Inductance (Per Leg) 7.8 nH Measured from anode lead to cathode lead 6mm (0.25 in.) from package Thermal-Mechanical Specifications Parameter Limits Units Conditions TJ Max. Junction Temperature Range -55 to 150 C Tstg RthJC Max. Storage Temperature Range Max. Thermal Resistance, Junction to Case (Per Leg) Max. Thermal Resistance, Junction to Case (Per Package) Weight (Typical) -55 to 150 C 1.25 C/W DC operation 0.63 C/W DC operation 9.3 g Die Size (Typical) 150 x 180 mils RthJC Wt Case Style See Fig. 4 TO-254AA Pulse Width < 300s, Duty Cycle < 2% 2 2016-09-21 35SCGQ060 1000 125C Reverse Current - I R ( mA ) 100 100 100C 10 75C 1 0.1 25C 0.01 0.001 0 10 20 30 40 50 60 Reverse Voltage - V R (V) 10 10000 Junction Capacitance - CT (pF) Instantaneous Forward Current - I F (A) Fig 2. Typical Values of Reverse Current Vs. Reverse Voltage (Per Leg) Tj = 125C Tj = 25C Tj = -55C 100 1 0.0 0.2 0.4 0.6 0.8 1.0 Forward Voltage Drop - V F (V) Fig 1. Max. Forward Voltage Drop Characteristics (Per Leg) 3 T J = 25C 1000 0 10 20 30 40 50 60 Reverse Voltage -V R (V) Fig 3. Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 2016-09-21 35SCGQ060 Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 0.1 0.02 0.01 0.01 0.00001 PDM 0.05 t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig 4. Max. Thermal Impedance ZthJC Characteristics (Per Leg) Allowable Case Temprature - (C) 180 35SCGQ060 160 R thJC = 0.63C/W 140 120 DC 100 80 60 40 20 0 0 10 20 30 40 50 60 Average Forward Current - I F(AV) (A) Fig 5. Max. Allowable Case Temperature Vs. Average Forward Current (Per Package) IR HiRel Headquarters: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Tel: (310) 252-7105 IR HiRel Leominster: 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 IR HiRel San Jose: 2520 Junction Avenue, San Jose, California 95134, USA Tel: (408) 434-5000 Data and specifications subject to change without notice. 4 2016-09-21 35SCGQ060 IMPORTANT NOTICE The information given in this document shall be in no event regarded as guarantee of conditions or characteristic. The data contained herein is a characterization of the component based on internal standards and is intended to demonstrate and provide guidance for typical part performance. It will require further evaluation, qualification and analysis to determine suitability in the application environment to confirm compliance to your system requirements. With respect to any example hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind including without limitation warranties on non- infringement of intellectual property rights and any third party. In addition, any information given in this document is subject to customer's compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer's product and any use of the product of Infineon Technologies in customer's applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of any customer's technical departments to evaluate the suitability of the product for the intended applications and the completeness of the product information given in this document with respect to applications. For further information on the product, technology, delivery terms and conditions and prices, please contact your local sales representative or go to (www.infineon.com/hirel). WARNING Due to technical requirements products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. 5 2016-09-21