J409.J (02/13)1pulseelectronics.com
PulseJack™
Surface Mount 1x1
RoHS peak wave reflow temperature rating 245°C
J0C SMT product, reduced size and low cost alternative
to JV series
Meets IEEE 802.3 specification
High performance for maximum EMI suppression
Minimum 1500Vrms isolation per IEEE 802.3 requirement
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
RoHS
Compliant
Part No.
TX RX
1-65
MHz
1-10
MHz
30
MHz
60-80
MHz
1-10
MHz
30-60
MHz
60-100
MHz
1-50
MHz
50-130
MHz
@ 60 Hz
1 MIN
J0C-0003NL 1CT:1 1CT:1 Down No No No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0004NL 1CT:1 1CT:1 Down No No Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0005NL 1CT:1 1CT:1 Down No Yes No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
JV0-0006NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
JV006I21NL 1CT:1 1CT:1 Down No No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV011I21NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV026I21NL 1CTS:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3011G21DNL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3026G01DNL 1CTS:1 1CT:1 Up G/Y Yes No -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3026G21DNL 1CTS:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JX30-0005NL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
Notes:
1. LEDs Left/Right: G = green; Y = yellow.
2. Add sux “T” for Tape & Reel option (e.g. J0C-0004T).
3. Extended Temperature: -40° to 85° C
Description:
100 Base-TX (Fast Ethernet) surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without
LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and
Network Interface Cars (NIC).
Features and Benefits:
Common Mode
Rejection
(dB MIN)
Crosstalk
(dB MIN)
Return Loss
(dB MIN)
100Ω (±15Ω)
Insertion
Loss
(dB MAX)
Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C
LEDs
L/R
BST
Circuit
EMI
Finger
Turns
Ratios
Hipot
(Vrms MIN)
Tab
Option
Up/Down
1
3
RJ45 Durability Test Rating
Part Number
Mating Force
(MAX)
Unmating Force
(MAX)
Durability Plug to Jack
Retention (MIN)
J0C/JV/J3 Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20 Ibs./9.072 kgs.
SMT Contacts
J0C
J30
JV0
J409.J (02/13)2pulseelectronics.com
PulseJack™
Surface Mount 1x1
RJ45 Material Specification
Part
Number
Shield Contact
MSL
Rating
Material Finish Material Plating Area Solder Area Material Specification
J0C/JV/J3
Series
Brass 20-40µ inches thick
nickel over Brass
Phosphor
Bronze
(X)µ inches gold over
30-80µ inches nickel
Tin matte finish High Temp.
Thermoplastic
UL 94 V-0 1
Housing
Notes:
1. Connector dimensions comply with FCC part 68 dimension requirements. 4. The MSL rating for J0C-000X is Level 4. All other connectors are Level 1.
2. MSL = Moisture Sensitivity Level rating: 1-5 (highest rating = 1, lowest rating = 5 5. NL parts are tin matte finish over nickel.
3. (X) = 30 inches gold for JV and J30 platforms and 15 inches gold for J0C platform.
35
2
4
J0C Platform Schematics
J0C-0003NL/04NL J0C-0003NL/04NL
1
4
2
3
5
6
7
8
TD+
CT
TD-
RD+
CT
RD-
NC
1 : 1
TRANSMIT
1 : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
GND*
TX+
TX-
RX+
RX-
1
2
3
6
5
4
8
7
1 : 1
TRANSMIT
1 : 1
RECEIVE
1
4
2
3
5
6
775
75
75
75
8
TD+
CT
TD-
RD+
CT
RD-
NC
PCB SIDE TO PHY
GND
CABLE SIDE
TX+
TX-
RX+
RX-
1
2
3
6
5
4
8
7
*Connecting pin 8 to Ground makes
J00-0042/46/64/66 footprint
comptaible to J00-0014-45-61-65.
NOTE: Connect GND to PCB ground.
J409.J (02/13)3pulseelectronics.com
PulseJack™
Surface Mount 1x1
JV006 JV011
JV Platform Schematics
2
1
3
4
6
5
1
2
3
6
4
5
7
8
TD+
CT
TD-
RD+
CT
RD-
TX+
TX-
RX+
RX-
PCB SIDE TO PHY
CABLE
1 : 1
TRANSMIT
1 : 1
RECEIVE
1
2
3
6
4
5
7
8
TX+
TX-
RX+
RX-
CABLE
2
1
3
4
6
5
TD+
CT
TD-
RD+
CT
RD-
PCB SIDE TO PHY
1 : 1
TRANSMIT
1 : 1
RECEIVE
0.001µ
Ω
75
Ω
75
Ω
75 Ω
75
Ω
75
C1
SHIELD
JV026
2
1
3
4
6
5
TD+
CT
TD-
RD+
CT
RD-
PCB SIDE TO PHY
1
2
3
6
4
5
7
8
TX+
TX-
RX+
RX-
CABLE
1 : 1
TRANSMIT
1 : 1
RECEIVE
0.001µ
Ω
75
Ω
75
Ω
75
Ω
75
C1
SHIELD
J409.J (02/13)4pulseelectronics.com
PulseJack™
Surface Mount 1x1
J3 Platform Schematics
J3011 J3026
JX30-0005NL
3
5
4
7
6
8
9
10
1
2
3
6
4
5
7
8
TD+
CT
TD-
RD+
CT
RD-
TX+
TX-
RX+
RX-
PCB SIDE TO PHY
CABLE
1 : 1
TRANSMIT
1 : 1
RECEIVE
75
C1
0.001µ
Ω
75Ω75Ω
75Ω
3
5
4
7
6
8
1
2
3
6
4
5
7
8
TD+
CT
TD-
RD+
CT
RD-
9
10
N/C
TX+
TX-
RX+
RX-
PCB SIDE TO PHY
CABLE
1 : 1
TRANSMIT
1 : 1
RECEIVE
0.001µ
75Ω
75Ω75Ω
75Ω
3
5
4
7
6
8
1
2
3
6
4
5
7
8
TD+
TD-
RD+
RD-
9
10
TX+
TX-
RX+
RX-
PCB SIDE TO PHY
CABLE
1 : 1
TRANSMIT
1 : 1
RECEIVE
CT2
CT1
CT1
0.001µ
75Ω75Ω75 Ω
75Ω
J409.J (02/13)5pulseelectronics.com
PulseJack™
Surface Mount 1x1
J0C Platform Mechanicals
J0C-0004NL/06NL
EMI Fingers
EMI Fingers
J409.J (02/13)6pulseelectronics.com
PulseJack™
Surface Mount 1x1
JV Platform Mechanicals
JV Series
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
JV0XX121
Date Code
Country of Origin
J409.J (02/13)7pulseelectronics.com
PulseJack™
Surface Mount 1x1
J3 Platform Mechanical
J3 Series
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
JX30-0005NL
& J3026G21D
With EMI
Tabs
J30XXGX1D
Date of Code
Country of Origin
J30-0005NL
J3026G21D
Date of Code
Country of Origin
J409.J (02/13)8pulseelectronics.com
PulseJack™
Surface Mount 1x1
J0C Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector
Magnetics Modules has been specifically designed for
the implementation of a 10Base-T and 100Base-TX
transmission over data-grade unshielded twisted pair
cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are
suitable for adapter card and multiport applications. Pulse
has worked closely with the leading IC manufacturers
in providing these 10/100 solutions, thereby assuring
compatibility with each transceiver.
The JC0 series meets the stringent open circuit
inductance requirements imposed by IEEE. When an 8mA
DC current is applied across the transformer windings, the
transformer will provide at least 350µH. The transformers
used in each module also provide 1500Vrms minimum
isolation, wide bandwidth with minimal attentuation and
fast rise times to minimize system level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse
are designed to meet all published specifications after
exposure to surface mount soldering temperatures.
The SMT are robust enough to withstand convection
and infrared reflow solder temperatures. Additionally,
compliant leads provide excellent solder-joint reliability
with a coplanarity of 0.10 (0.004”).
Note: Modules are packaged in trays, unless Tape & Reel
is specified (ex: J0C-0003NL for Trays and J0C-0003NLT
for Tape & Reel).
J0C-0003NL/04NL Connector
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference) 3. Connections between the 10/100 IC and the
place the decoupling capacitors adjacent to VCC and 50Ω SMT connector should be direct (ideally no change
connections. in direction) and of minimum length.
2. Connections to ground should be as short as possible.
J409.J (02/13)9pulseelectronics.com
PulseJack™
Surface Mount 1x1
JV Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector
Magnetics Modules has been specifically designed for
the implementation of a 10Base-T and 100Base-TX
transmission over data-grade unshielded twisted pair
cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are
suitable for adapter card and multiport applications. Pulse
has worked closely with the leading IC manufacturers
in providing these 10/100 solutions, thereby assuring
compatibility with each transceiver.
The JC0 series meets the stringent open circuit
inductance requirements imposed by IEEE. When an 8mA
DC current is applied across the transformer windings, the
transformer will provide at least 350µH. The transformers
used in each module also provide 1500Vrms minimum
isolation, wide bandwidth with minimal attentuation and
fast rise times to minimize system level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse
are designed to meet all published specifications after
exposure to surface mount soldering temperatures.
The SMT are robust enough to withstand convection
and infrared reflow solder temperatures. Additionally,
compliant leads provide excellent solder-joint reliability
with a coplanarity of 0.10 (0.004”).
Note: Modules are packaged in trays, unless Tape & Reel is
specified. Please add the sux “T” for Tape & Reel orders
(ex: JVO006121T). Add the sux “NL” for RoHS compliant
parts (ex: JV006I21NLT for Trays and JV006I21NLT for
Tape & Reel).
JV006I21 Connector
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference) 3. Connections between the 10/100 IC and the
place the decoupling capacitors adjacent to VCC and 50Ω SMT connector should be direct (ideally no change
connections. in direction) and of minimum length.
2. Connections to ground should be as short as possible.
J409.J (02/13)10 pulseelectronics.com
PulseJack™
Surface Mount 1x1
J0C Packaging Specifications
J0C Series
Weight ..............7.07 grams
Tape & Reel ............ 90/reel
Tray ........................80/tray
Tape ................... 44x32mm
Tube ...................... 25/tube
Tape and Reel Specification
Tray Specification
J409.J (02/13)11 pulseelectronics.com
PulseJack™
Surface Mount 1x1
JV Packaging Specifications
JV Series
Weight ................6.6 grams
Tape & Reel ..........150/reel
Tray ........................45/tray
Tape ...................44x32mm
Tape and Reel Specification
Tray Specification
12 pulseelectronics.com
PulseJack™
Surface Mount 1x1
J409.J (02/13)
For More Information
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA
92128
U.S.A.
Tel: 858 674 8100
Pulse Europe
Einsteinstrasse 1
D-71083 Herren-
berg
Germany
Tel: 49 7032 7806
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technol-
ogy Bldg.
10th Kejinan Road
High-Tech Zone
Nanshan District
Shenzen, PR China
518057
Pulse North China
Room 2704/2705
Super Ocean Finance
Ctr.
2067 Yan An Road
West
Shanghai 200336
China
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6287 8998
Pulse North Asia
3F, No. 198
Zhongyuan Road
Zhongli City
Taoyuan County 320
Taiwan R. O. C.
Tel: 886 3 4356768
Fax: 886 3 4356823
(Pulse)
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2013. Pulse Electronics, Inc. All rights reserved.
J3 Series
J3 Packaging Specifications
Weight ................8.1 grams
Tape & Reel ............ 75/reel
Tray ........................45/tray
Tape ................... 56x32mm
Tape and Reel Specification
Tray Specification