1
01-2012, Rev. 0112
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Connectors in 3 different versions
n PCB Socket
With the solderable connector Micro ISO relays with plug-in
terminals can be mounted on leadframes. This allows easy and
reasonable replacement in case of service.
n Connector
5 pole connector with snap-in pin to lock in frame.
n Connector with mounting flap
5 pole connector that can be mounted individually or interlocked.
The connector has a snap-in pin to lock in frame.
The mounting bracket also allows screw-on.
Connectors for Micro ISO Relays
Automotive Relays
Accessories
F333-50_fcw1a
Technical Data
Weight
PCB socket approx. 5.9g (0.21oz)
Connector approx. 5.4g (0.19oz)
Connector with mounting flap approx. 11.9g (0.42oz)
Storage conditions according to IEC6006881)
Packaging/unit
PCB socket (V23333-Z0002-B049) 800 pcs.
Connector (V23333-Z0001-B046) 400 pcs.
Connector with mounting flap (V23333-Z1001-B045) 150 pcs.
1) For general storage and processing recommendations please refer to the Application Notes and especially to storage in our
Definitions or at http://relays.te.com/appnotes/
14,5
22,6
0,3
5
7,6
0,3 0,1
4,5 0,1 4,5 0,1
3
8
0,1
2,5
0,1
14
0,1
4,5 0,07 4,5 0,07
8
0,1
3
0,2
14
0,1
15,2 0,3
PCB
14,5
22,6
0,3
5
7,6
0,3
0,1
4,5
0,1
4,5
0,1
3
8
0,1
2,5
0,1
14
0,1
4,5
0,07
4,5
0,07
8
0,1
3
0,2
14
0,1
15,2
0,3
PCB
Connector V23333-Z1001-B046
Terminals to be ordered separately.
333-49_DD2
333_46_DD2
Mounting recommendation: to keep insertion force away from the PCB the
soldering of the socket to the PCB should be done with already inserted
relay.
Dimensions
PCB socket V23333-Z0002-B049
14,5
22,6 0,3
5
7,6
0,3
0,1
4,5
0,1
4,5
0,1
3
80,1
2,5 0,1
14 0,1
4,5
0,07
4,5
0,07
80,1
30,2
14 0,1
15,2
0,3
PCB
2
01-2012, Rev. 0112
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Connectors for Micro ISO Relays
Automotive Relays
Accessories
Selection of fitting crimp terminals1) (Ph. bronze tin plated)2)
Part numbers for connectors Terminal
size
Wire
mm²
Use
for
Quantity required Use in cavities Part number for
crimp terminals
Product code Part number Form A Form C Form A Form C
V23333-Z0002-B049 2-1904045-7 – – – – – – – –
V23333-Z0001-B046 1-1904045-6
4.8 x 0.8
4.8 x 0.8
6.3 x 0.8
0.5 - 1.5
1.0 - 2.5
1.0 - 2.5
Coil
Load
Load
2
–
2
2
1
2
1 and 2
–
3 and 5
1 and 2
4
3 and 5
280919-4
281197-2
160927-4
V23333-Z1001-B045 1-1904045-5
4.8 x 0.8
4.8 x 0.8
6.3 x 0.8
0.5 - 1.5
1.0 - 2.5
1.0 - 2.5
Coil
Load
Load
2
–
2
2
1
2
1 and 2
–
3 and 5
1 and 2
4
3 and 5
280919-4
281197-2
160917-2
1) Crimp terminals to be ordered separately.
2) Mentioned crimp terminals are delivered in strip-form, loose pieces and hand tool available on request.
Connector with mounting flap V23333-Z1001-B045
To be mounted individually or can be interlocked.
Terminals to be ordered separately.
333_45_DD2
