CSD10060-Silicon Carbide Schottky Diode VRRM Zero Recovery(R) Rectifier IF(AVG) = 10 A Qc Features * * * * * * * = 600 V = 28 nC Package 600-Volt Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-263-2 TO-220-2 Benefits * * * * * Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 CASE PIN 2 Applications * * * Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 1000W-2000W Motor Drives - Typical Power : 3HP-5HP Part Number Package Marking CSD10060A TO-220-2 CSD10060 CSD10060G TO-263-2 CSD10060 Maximum Ratings .S D10060, Rev Datasheet: CS Symbol Parameter Value Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V IF(AVG) Average Forward Current 10 16.5 A TC=150C TC=125C IF(Peak) Peak Forward Current 23 A TC=125, TREP<1 mS, Duty=0.5 IFRM Repetitive Peak Forward Surge Current 43 29 A TC=25C, tP=10 ms, Half Sine Wave TC=125C, tP=10 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 77 A TC=25C, tP=1.5 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 250 A TC=25C, tP=10 s, Pulse Ptot Power Dissipation 136.3 45.4 W TC=25C TC=125C Operating Junction and Storage Temperature -55 to +175 C 1 8.8 Nm lbf-in TJ , Tstg TO-220 Mounting Torque Note M3 Screw 6-32 Screw Subject to change without notice. www.cree.com 1 Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.5 2.0 1.8 2.4 V IR Reverse Current 50 100 200 1000 A VR = 600 V TJ=25C VR = 600 V TJ=150C QC Total Capacitive Charge 28 nC VR = 600 V, IF = 10 A di/dt = 500 A/s TJ = 25C C Total Capacitance 550 65 50 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 200 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz Note IF = 10 A TJ=25C IF = 10 A TJ=175C Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RJC Parameter Thermal Resistance from Junction to Case Typ. Unit 1.1 C/W Typical Performance 20 200 18 180 16 160 IR Reverse Current (A) IF Forward Current (A) 14 12 10 8 6 120 100 80 60 4 40 2 20 0 0 1.0 2.0 3.0 4.0 VF Forward Voltage (V) Figure 1. Forward Characteristics 2 140 CSD10060 Rev. S 0 0 100 200 300 400 500 600 700 VR Reverse Voltage (V) Figure 2. Reverse Characteristics Typical Performance Current Derating 400 100.0 100 95.0 90 90.0 85.0 80 80.0 75.0 70 70.0 65.0 60.0 60 55.0 50 50.0 45.0 40.0 40 35.0 30.0 30 25.0 20.0 20 15.0 10.0 10 5.0 0 0.0 350 10% 30% 50% 70% DC C Capacitance (pF) Current (A) Forward Peak IF(PEAK) Peak Forward Current 300 Duty* Duty* Duty* Duty* 250 200 150 100 50 0 25 25 50 75 100 125 150 175 200 50 75 100 125 150 175 200 1 DC * Frequency > 1KHz 70% Duty 50% Duty 30% Duty 10 100 1000 VR Reverse Voltage (V) Case Temperature (C) TC Case Temperature 10% Duty Figure 3. Current Derating Figure 4. Capacitance vs. Reverse Voltage 1.0E+01 Zth (C/W) 1.0E+00 1.0E-01 1.0E-02 1.0E-03 1.E-07 1.E-06 1.E-05 1.E-04 1.E-03 Tim e (s) Figure 5. Transient Thermal Impedance 3 CSD10060 Rev. S 1.E-02 1.E-01 1.E+00 Typical Performance 140 140.000 Power Dissipation (W) 120.000 120 100 100.000 80 80.000 60 60.000 40 40.000 20 20.000 0 0.000 25 50 75 100 125 150 175 25 50 75 100 125 150 175 TC Case Temperature (C) Figure 6. Power Derating 4 CSD10060 Rev. S Package Dimensions POS Package TO-220-2 A B A F J C P B D X S E Y 1 2 G T Z U H V L M W N PIN 1 CASE PIN 2 Millimeters Min Max Min Max .381 .410 9.677 10.414 DA .235 Inc hes .100 M in M ax .395.223 .410 .255 5.969 M illim eters .120 2.540 M in M ax .337 5.664 10.033 10.414 EB .235.590 .255 .615 5.969 FC D G E H F J G .102.143 .112 2.591 .153 .337 .337 8.560 1.105 1.147 .590 .610 14.986 .500 .550 .149 .153 3.785 R1.147 0.197 28.626 1.127 LH MJ L N M PN .530.025 .550 R 0.010 .045 .028 .036 .195 .045 .055 .195.165 .205 13.462 13.970 .036 .635 R 0.254 .055 1.143 .711 .914 .205 4.953 1.143 1.397 .185 4.191 4.953 5.207 QP .170.048 .180 .054 4.318 1.219 4.572 1.372 SQ S T T U U VV .048 3 .054 1.371 3 5 3 5 3 5 2.388 2.794 6 3 5 .100.094 .110 1.219 6 3 6 3 6 3 .110 2.54 WW XX .014.014 .021 3 3 5 .356 .025 3 5.5 .533 .356 53 C P OS Q Inches Y z Y Z 3 3 5 3 5 3 .395 .410 .385 .130 .150 .130 10.033 .410 3.302 .150 14.986 6.477 6.477 3.048 8.560 15.621 2.845 3.632 3.886 8.560 28.067 29.134 15.494 12.700 13.970 3.886 29.134 R 0.197 10.414 9.779 3.810 3.302 .914 1.397 5.207 4.699 6 6 2.794 .635 5.5 10.414 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish Package Dimensions POS Package TO-263-2 Inches Max Min Max A .396 .406 10.058 10.312 B .297 .303 7.544 7.696 C .057 .063 1.448 1.600 D .237 .243 6.015 6.167 E* 0.00 .070 0.00 1.778 F .048 .062 1.219 1.575 G * PIN 1 PIN 2 CASE Millimeters Min .100 TYP 2.540 TYP H .335 .345 8.509 8.763 J .028 .034 .711 .864 K 2 4 2 4 L .170 .180 4.318 4.572 M .048 .052 1.219 1.321 N .595 .615 15.113 15.621 P 0.00 0.10 0.00 .254 Q R0.018 TYP R0.022 TYP R0.457 TYP R0.559 TYP R .090 .110 2.286 2.794 S .013 .017 .330 .432 T 6.5 8.5 6.5 8.5 U .103 .107 2.616 2.718 V R0.028 TYP R0.032 TYP R0.711 TYP R0.813 TYP W -- 5.0 -- 5.0 Note: * Tab "E" may not be present 5 CSD10060 Rev. S Recommended Solder Pad Layout TO-220-2 TO-263-2 Part Number Package Marking CSD10060A TO-220-2 CSD10060 CSD10060G TO-263-2 CSD10060 Diode Model Diode Model CSD10060 Vf T = VT + If*RT VT= 0.92 + (Tj * -1.35*10-3) RT= 0.052 + (Tj * 0.29*10-3) Note: Tj = Diode Junction Temperature In Degrees Celcius VT RT "The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. This part number was released previously with Sn/Pb solder plating as a standard industry finish. For more information please contact power_sales@cree.com " This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright (c) 2006-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 CSD10060 Rev. S Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power