DATASHEET - M22-K10 Contact element, Screw terminals, Front fixing, 1 N/O, 24 V 3 A, 220 V 230 V 240 V 6 A Part no. Catalog No. Alternate Catalog No. EL-Nummer (Norway) M22-K10 216376 M22-K10Q 4355363 Delivery program Product range Accessories Basic function accessories Contact elements Accessories Auxiliary contact Accessories Standard auxiliary contact, trip-indicating auxiliary switch Standard/Approval UL/CSA, IEC Construction size NZM1/2/3/4 Connection technique Screw terminals Fixing Front fixing Degree of Protection IP20 Connection to SmartWire-DT no For use with NZM1(-4), 2(-4), 3(-4), 4(-4) PN1(-4), 2(-4), 3(-4) N(S)1(-4), 2(-4), 3(-4), 4(-4) Approval Contacts 1 N/O Contact sequence N/O = Normally open Contact travel diagram, stroke in connection with front element Contact diagram 12/29/2020 Eaton 216376 ED2020 V75.0 EN 1/6 Configuration Connection type Single contact Description of HIA trip-indicating auxiliary contact General trip indication '+', when tripped by shunt release, overload release, shortcircuit release or by the residual-current release due to residual-current. Can be used with NZM1, 2, 3 circuit-breaker: a trip-indicating auxiliary contact can be clipped into the circuit-breaker. Can be used with NZM4 circuit-breaker: up to two standard auxiliary contacts can be clipped into the circuit-breaker. Any combinations of the auxiliary contact types are possible. Not in combination with switch-disconnector PN... Marking on switch: HIA Labeling in FI-Block: HIAFI. If the trip-indicating auxiliary switch in the fault current block is used, the NC contacts operates as a N/O contact and the NC contact operates as an N/O contact. Description standard auxiliary contact HIN Switching with the main contacts Used for indicating and interlocking tasks. Can be used with NZM1 circuit-breaker: a standard auxiliary contact can be clipped into the circuit-breaker. Can be used with NZM2 size circuit-breaker: a standard auxiliary contact can be clipped into the circuit-breaker. Can be used with NZM3, 4 circuit-breaker: up to three standard auxiliary contacts can be clipped into the circuit-breaker. Any combinations of the auxiliary contact types are possible. Marking on switch: HIN. On combination with remote operator NZM-XR... the right mounting location of standard auxiliary contact HIN can be fitted only with individual contacts. Connection technique Screw terminals Notes For Std. pack: M22(C)K... : Std. pack = 20 off Notes The following can be clipped into the switches: * * * * NZM1: a standard auxiliary contact NZM2: up to two M22-(C)K... standard auxiliary contacts NZM3: up to three M22-(C)K... standard auxiliary contacts NZM4: up to three M22-(C)K... standard auxiliary contacts Any combinations of the auxiliary contact types are possible. Marking on switch: HIN In combination with remote operator NZMXR... only single contacts can be fitted to some installation locations of the standard auxiliary contact. NZM2: Only single contact can be fitted in left installation location of standard auxiliary contact. NZM3: Only single contact can be fitted in installation locations of standard auxiliary contact. NZM4: Only single contact can be fitted in right installation location of standard auxiliary contact. Technical data General Standards Lifespan, mechanical Operations Operating frequency Operations/h 3600 Actuating force n 5 Operating torque (screw terminals) Nm 0.8 Degree of Protection IP20 Climatic proofing Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature C -25 - +70 Mechanical shock resistance to IEC 60068-2-27 Shock duration 11 ms, halfsinusoidal g > 30 Terminal capacities mm Solid mm Stranded mm Flexible with ferrule Rated impulse withstand voltage Uimp 12/29/2020 Eaton 216376 ED2020 V75.0 EN Open Contacts IEC 60947-5-1 x 10 6 >5 2 2 0.75 - 2.5 2 0.5 - 2.5 mm 2 0.5 - 1.5 V AC 6000 2/6 Rated insulation voltage Ui V 500 Overvoltage category/pollution degree III/3 Control circuit reliability at 24 V DC/5 mA HF -7 7 Fault < 10 (i.e. 1 failure to 10 operations) probability at 5 V DC/1 mA HF -6 6 Fault < 5 x 10 (i.e. 1 failure in 5 x 10 operations) probability Max. short-circuit protective device Fuseless Type PKZM0-10/FAZ-B6/1 Fuse gG/gL A 10 Ie A 115 V Ie A 6 220 V 230 V 240 V Ie A 6 380 V 400 V 415 V Ie A 4 500 V Ie A 2 24 V Ie A 3 42 V Ie A 1.7 60 V Ie A 1.2 110 V Ie A 0.6 220 V Ie A 0.3 Lifespan, electrical Switching capacity Rated operational current AC-15 DC-13 AC-15 230 V/0.5 A Operations 230 V/1.0 A 230 V/3.0 A DV-13 12 V/2.8 A Auxiliary contacts Rated operational voltage x 10 6 1.6 Operations x 10 6 1 Operations x 10 6 0.7 Operations x 10 6 1.2 Ue V Rated operational voltage Ue V AC 500 Rated operational voltage, max. Ue V DC 220 Conventional thermal current Ith = Ie CSA 4 Rated operational current Ie A Different rated operational currents when used as auxiliary contact for NZM circuit-breaker bei AC = 50/60 Hz Bemessungsbetriebsstrom AC-15115 Ie V 230 Ie V 400 Ie V 500 Ie V DC-1324 V Ie 42 V Ie 60 V Ie 110 Ie V 220 Ie V Short-circuit protection max. fuse A gG/gL 10 Max. miniature circuit-breaker A FAZ-B6/B1 Operating times 12/29/2020 Eaton 216376 ED2020 V75.0 EN M22M22XHIV (C)K10(01) CK11(02) (20) A 4 4 4 A 4 4 4 A 2 - 2 A 1 - 1 A A A A 3 1.7 1.2 0.6 3 1 0.8 0.5 3 1.5 0.8 0.5 A 0.3 0.2 0.2 3/6 Early-make time of the HIV compared to the main contacts during with make and break switching. (switch times with manual operation): NZM1, PN1, N(S)1: ca. 20 ms NZM2, PN2, N(S)2: ca. 20 ms NZM3, PN3, N(S)3: ca. 20 ms NZM4, N(S)4: approx. 90 ms, the HIV switch early Offswitching not forward. Terminal capacities 2 mm 2 1 x (0,75 - 2,5) 2 x (0,75 - 2,5) Ie A 5 A - 600 V AC 1 A - 250 V DC Maximum equipment and position of the internal accessories Rated operational current for specified heat dissipation In A 6 Heat dissipation per pole, current-dependent Pvid W 0.11 Equipment heat dissipation, current-dependent Pvid W 0 Static heat dissipation, non-current-dependent Pvs W 0 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. C -25 Operating ambient temperature max. C 70 10.2 Strength of materials and parts 10.2.2 Corrosion resistance Meets the product standard's requirements. 10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements. 10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements. 10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects Meets the product standard's requirements. 10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements. 10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated. 10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated. 10.2.7 Inscriptions Solid or flexible conductor, with ferrule UL/CSA Rated operational current Other technical data (sheet catalogue) Design verification as per IEC/EN 61439 Technical data for design verification IEC/EN 61439 design verification mm Meets the product standard's requirements. 10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated. 10.4 Clearances and creepage distances Meets the product standard's requirements. 10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated. 10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated. 10.7 Internal electrical circuits and connections Is the panel builder's responsibility. 10.8 Connections for external conductors Is the panel builder's responsibility. 10.9 Insulation properties 10.9.2 Power-frequency electric strength Is the panel builder's responsibility. 10.9.3 Impulse withstand voltage Is the panel builder's responsibility. 10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility. 10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder's responsibility. The specifications for the switchgear must be observed. 10.12 Electromagnetic compatibility Is the panel builder's responsibility. The specifications for the switchgear must be observed. 10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. Technical data ETIM 7.0 Low-voltage industrial components (EG000017) / Auxiliary contact block (EC000041) Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Auxiliary switch block (ecl@ss10.0.1-27-37-13-02 [AKN342013]) 12/29/2020 Eaton 216376 ED2020 V75.0 EN 4/6 Number of contacts as change-over contact 0 Number of contacts as normally open contact 1 Number of contacts as normally closed contact 0 Number of fault-signal switches 0 Rated operation current Ie at AC-15, 230 V A 6 Type of electric connection Screw connection Model Top mounting and integrable Mounting method Front fastening Lamp holder None Product Standards IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking UL File No. E29184 UL Category Control No. NKCR CSA File No. 012528 CSA Class No. 3211-03 North America Certification UL listed, CSA certified Degree of Protection UL/CSA Type: - Approvals Dimensions A = 37.2 Pushbutton with M22-(C)K... Pushbutton with M22-(C) LED... + M22-XLED... 12/29/2020 Eaton 216376 ED2020 V75.0 EN 5/6 Additional product information (links) IL04716002Z (AWA1160-1745) RMQ-Titan System IL04716002Z (AWA1160-1745) RMQ-Titan System https://es-assets.eaton.com/DOCUMENTATION/AWA_INSTRUCTIONS/IL04716002Z2020_09.pdf DGUV Test Mark Customer Information http://www.dguv.de/medien/dguv-test-medien/_pdf_zip_doc_ppt/agb-und-pzo/dguv_test_zeichen_infoblatt_kunden.pdf Maximum equipment and position of the internal accessories http://ecat.moeller.net/flip-cat/?edition=HPLEN&startpage=17.178 12/29/2020 Eaton Industries GmbH http://www.eaton.eu (c) 12/2020 by Eaton Industries GmbH Eaton 216376 ED2020 V75.0 EN 6/6