CPH3110 / CPH3210 Ordering number : ENN6079A CPH3110 / CPH3210 PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Applications * Relay drivers, lamp drivers, motor drivers, flash. Features * * * * * * Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3110 Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--30)40 V Collector-to-Emitter Voltage VCEO (--)30 V Emitter-to-Base Voltage VEBO (--)6 V IC (--)5 A Collector Current Collector Current (Pulse) Base Current ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Mounted on a ceramic board (600mm20.8mm) (--)7 A (--)1.2 A 0.9 W 150 C --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Conditions Ratings min typ max VCB=(--)30V, IE=0 VEB=(--)4V, IC=0 Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)500mA VCE=(--)10V, IC=(--)500mA Output Capacitance Cob VCB=(--)10V, f=1MHz 200 Unit (--)0.1 A (--)0.1 A 560 (250)290 Marking : CPH3110 : AK, CPH3210 : CK (52)40 MHz pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000285 / 71299TS (KOTO) TA-2032 No.6079-1/5 CPH3110 / CPH3210 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time Storage Time Ratings Conditions min typ IC=(--)2.5A, IB=(--)50mA IC=(--)2.5A, IB=(--)50mA Unit max (--140)110 (--210)165 (--0.81)0.82 IC=(--)10A, IE=0 IC=(--)1mA, RBE= mV (--)1.2 V (--30)40 V (--)30 V IE=(--)10A, IC=0 See specified Test Circuit. (--)6 V ton tstg See specified Test Circuit. (190)320 ns tf See specified Test Circuit. (17)14 ns Fall Time Package Dimensions (30)30 ns Switching Time Test Circuit unit : mm 2150A 2.9 0.6 0.4 3 IB1 PW=20s D.C.1% 0.2 0.15 INPUT RB VR 1.6 50 + + 0.6 2 1 RL 2.8 0.05 OUTPUT IB2 100F 1.9 0.7 0.9 0.2 1 : Base 2 : Emitter 3 : Collector 470F VBE= --5V VCC=12V 20IB1= --20IB2=IC=2.5A For PNP, the polarity is reversed. SANYO : CPH3 IC -- VCE --20mA --10mA --2.0 A A 80m A 90m 4.0 m 30mA 40m A m 50 A m 60 20mA 3.0 10mA 2.0 1.0 --1.0 IB=0 --200 --300 --400 Collector-to-Emitter Voltage, VCE -- mV Collector Current, IC -- A --0.8 --0.7 --25C Ta=75C --0.4 25C --0.6 --0.3 400 500 IT08034 CPH3210 VCE=2V 0.8 0.7 0.6 0.5 0.4 0.3 --0.2 0.2 --0.1 0.1 0 300 IC -- VBE 1.0 0.9 --0.5 200 Collector-to-Emitter Voltage, VCE -- mV IT08033 CPH3110 VCE= --2V --0.9 100 0 IC -- VBE --1.0 IB=0 0 --500 --25C --100 Ta=75C 0 25C 0 Collector Current, IC -- A A 70 -0m 90m A A --3.0 --5 A --40m A m 0 --3 mA A 0 0m --7 --8 Collector Current, IC -- A 0mA --1 0 Collector Current, IC -- A CPH3210 --6 mA --4.0 IC -- VCE 5.0 A 0m CPH3110 100 --5.0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 Base-to-Emitter Voltage, VBE -- V --0.8 --0.9 IT08035 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Base-to-Emitter Voltage, VBE -- V 0.8 0.9 IT08036 No.6079-2/5 CPH3110 / CPH3210 hFE -- IC 1000 7 DC Current Gain, hFE DC Current Gain, hFE Ta=75C 25C --25C 2 CPH3210 VCE=2V 7 5 3 hFE -- IC 1000 CPH3110 VCE= --2V 5 Ta=75C 25C 3 --25C 2 100 100 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 3 2 100 7 5 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 2 7 2 --10 3 Collector-to-Base Voltage, VCB -- V 7 = Ta 3 2 C 5 --2 C 25 --10 7 5 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 IT08040 Cob -- VCB CPH3210 f=1MHz 100 7 5 3 2 2 3 5 7 2 10 3 3 5 IT08042 VCE(sat) -- IC CPH3210 IC / IB=20 2 100 7 5 C 75 = Ta 3 2 C 25 C 25 -- 10 7 5 5 3 --0.01 7 Collector-to-Base Voltage, VCB -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --100 C 75 100 5 2 5 2 IT08041 CPH3110 IC / IB=20 5 7 10 IT08038 3 10 1.0 5 VCE(sat) -- IC 5 3 Collector Current, IC -- A Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 5 5 2 2 7 3 5 7 1.0 5 3 100 2 3 CPH3210 VCE=10V 10 0.01 5 CPH3110 f=1MHz 10 --1.0 2 f T -- IC IT08039 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 Cob -- VCB 3 5 7 0.1 7 Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 7 2 3 1000 CPH3110 VCE= --10V 10 --0.01 2 Collector Current, IC -- A f T -- IC 1000 3 7 0.01 5 7 --10 IT08037 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 7 --10 IT08043 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 7 10 IT08044 No.6079-3/5 CPH3110 / CPH3210 VCE(sat) -- IC --1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 --100 C 75 7 C C --25 25 = Ta 5 3 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 2 100 7 5 2 10 0.01 2 25C Ta= --25C 7 75C 5 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector Current, IC -- A IT08046 VBE(sat) -- IC CPH3210 IC / IB=50 2 25C 1000 Ta= --25C 7 75C 5 3 2 0.01 5 7 --10 IT08047 Collector Current, IC -- A 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT08048 Collector Current, IC -- A ASO 2 2 3 CPH3110 IC / IB=50 --1000 C 75 C C 25 5 --2 = Ta 3 VBE(sat) -- IC 3 CPH3210 IC / IB=50 3 5 7 --10 IT08045 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 VCE(sat) -- IC 5 CPH3110 IC / IB=50 PC -- Ta 1.0 CPH3110 / CPH3210 1m 0m s s op era tio 3 2 3 2 Collector Dissipation, PC -- W DC s 10 1.0 7 5 0.1 7 5 ms s 10 0 IC=5A 0 Collector Current, IC -- A 0.9 50 3 2 ICP=7A 10 10 7 5 n CPH3110 / CPH3210 Ta=25C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm20.8mm) 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V M 0.8 ou nt ed on 0.6 ac er am ic bo ar 0.4 d (6 00 m m2 0. 8m 0.2 m ) 0 3 5 IT08049 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT08050 No.6079-4/5 CPH3110 / CPH3210 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.6079-5/5