with Independent Push Button Contact
Compact Indicator with One, Two, or Three Colors and a Momentary Push Button Output
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com.
• Rugged, cost-effective and easy-to-install multicolor indicator light with pushbutton
• Waterproof IP65 construction for washdown environments
• Excellent for panel mounting or as a stand-alone device
• Immune to EMI and RFI interference
• 12 to 30V dc operation
• Cabled and Quick Disconnect models available
• Up to 3 independent colors in one unit
Models
Family Color 1 Color 2 Color 3 Input Output Connector1
K50L G R Y P PB2 Q
MODEL KEY
G = Green
R = Red
Y = Yellow
B = Blue
W = White
O = Orange
T = Turquoise
V = Violet
M = Magenta
X = No color in this position
P = PNP PB2 = Momentary Push
Button
Q = Euro QD
Blank = 2 meter cable
QP = Euro Pigtail QD
Example Model # of LED Colors LED Indicators Connection
K50LGXXPPB2Q
1
Green
4-pin Euro integral QD Connector
K50LRXXPPB2Q Red
K50LGRXPPB2Q
2
Green, Red
5-pin Euro integral QD Connector
K50LGYXPPB2Q Green, Yellow
K50LGRYPPB2Q 3 Green, Red, Yellow 8-pin Euro integral QD Connector
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This
device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor
failure or malfunction can cause either an energized or de-energized sensor output condition.
1Integral QD models only are listed.
• For integral 2 m (6.5 ft) PVC cable, omit suffix Q from model number (example, K50LGXXPPB2).
• For 150 mm (6 in) PVC pigtail with QD, replace Q with QP in model number (example, K50LGXXPPB2QP).
• A model with a QD requires a mating cordset (see Quick-Disconnect (QD) Cordsets on page 4).
EZ-LIGHT® K50L Series
P/N 168310 Rev. C 6/18/2013
0 168310 1
Installation
Install the K50 sensor at such a height and in a location that will be easy for the user and/or supervisor to see the indicator and comfortable for the user to press the push-
button.
Specifications
Supply Voltage and Current
Operating Voltage: 12 to 30V dc
Current: 65 mA at 12 Vdc; 35 mA at 30 Vdc max. current per LED color
Supply Protection Circuitry
Protected against transient voltages and reverse polarity
Switch Contact Rating
150 mA at 30V dc
Contact Bounce
10 ms max.
Environmental Rating
IEC IP65
Construction
Base: polycarbonate
Translucent dome: polycarbonate
Push button: thermoplastic
Mounting Torque
2.25 Nm (20 in-lbf) max.
Connections
Integral Euro-style QD fitting, PVC-jacketed 2 m (6.5 ft) cable or 150 mm
(6 in) PVC pigtail with QD, depending on model
Operating Temperature
−40° to +50° C (−40° to +122° F)
Max. Relative Humidity
90% at +50° C max. relative humidity (non-condensing)
Storage Temperature
−40° to +70° C (−40° to +158° F)
Certifications
Dimensions
All measurements are in mm (in).
EZ-LIGHT® K50L Series
2 www.bannerengineering.com - tel: 763-544-3164 P/N 168310 Rev. C
Hookups
4-Pin Models
Sourcing (PNP) Input Key
3
4
1
2
10-30V dc
Indicator
Color
C1
PB
1 = Brown
2 = White
3 = Blue
4 = Black
C1 = Color 1
PB = Push Button
5-Pin Models
Sourcing (PNP) Input Key
3
4
1
2
5
10-30V dc
Indicator
Color
C1
C2
PB
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
C1 = Color 1
C2 = Color 2
PB = Push Button
8-Pin Models
Sourcing (PNP) Input Key
7
6
2
4
1
5
10-30V dc
Indicator
Color
C1
C2
C3
PB
1 = White
2 = Brown
3 = Green (not used)
4 = Yellow
5 = Gray
6 = Pink
7 = Blue
8 = Red (not used)
C1 = Color 1
C2 = Color 2
C3 = Color 3
PB = Push Button
EZ-LIGHT® K50L Series
P/N 168310 Rev. C www.bannerengineering.com - tel: 763-544-3164 3
Accessories
Quick-Disconnect (QD) Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model Length Style Dimensions Pinout
MQDC-406 1.83 m (6 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
1 = Brown
2 = White
3 = Blue
4 = Black
MQDC-415 4.57 m (15 ft)
MQDC-430 9.14 m (30 ft)
MQDC-450 15.2 m (50 ft)
5-Pin Threaded M12/Euro-Style Cordsets (Single Ended)
Model Length Style Dimensions Pinout (Female)
MQDC1-501.5 0.50 m (1.5 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
5
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
MQDC1-506 1.83 m (6 ft)
MQDC1-515 4.57 m (15 ft)
MQDC1-530 9.14 m (30 ft)
MQDC1-506RA 1.83 m (6 ft)
Right-Angle
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDC1-515RA 4.57 m (15 ft)
MQDC1-530RA 9.14 m (30 ft)
8-Pin Threaded M12/Euro-Style Cordsets with Shield
Model Length Style Dimensions Pinout
MQDC-806 1.83 m (6 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
5
4
3
2
8
1
7
6
MQDC-815 4.57 m (15 ft) 1 = White
2 = Brown
3 = Green
4 = Yellow
5 = Gray
6 = Pink
7 = Blue
8 = Shield
MQDC-830 9.14 m (30 ft)
EZ-LIGHT® K50L Series
4 www.bannerengineering.com - tel: 763-544-3164 P/N 168310 Rev. C
Brackets
All measurements are in mm
SMB30A
• Right-angle bracket with curved
slot for versatile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor
• 12-ga. stainless steel
45
61
69
A
B
C
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
SMB30FA
• Swivel bracket with tilt and pan
movement for precise adjustment
• Mounting hole for 30 mm sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to extrude
rail T-slot
• Metric and inch size bolt available
A
B68.9
36.3
83.2
Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50
Hole size: B= ø 30.1
SMB30MM
• 12-ga. stainless steel bracket with
curved mounting slots for versa-
tile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor
70
57
A
B
C
57
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced thermoplastic
polyester
• Stainless steel mounting and
swivel locking hardware included
67
58
29
B
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE,
COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSE-
QUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARIS-
ING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
EZ-LIGHT® K50L Series
www.bannerengineering.com - tel: 763-544-3164
