RFMD + TriQuint = Qorvo QPC6044 Absorptive High Isolation SP4T Switch 5 MHz to 6000 MHz Package: QFN, 24-pin, 4.0 mm x 4.0 mm The QPC6044 is a Silicon on Insulator (SOI) single-pole, 4-throw (SP4T) switch, designed for use in cellular, 3G, LTE, and other high performance communications systems. It offers high isolation symmetric topology with excellent linearity and power handling capability. No blocking capacitors are necessary on the RF ports. The design is non-reflective such that the RFX ports are terminated into 50 in the off state. QPC6044 is +1.8 V logic compatible, and incorporates a single pin to disable the internal Negative Voltage Generator (NVG) and supply a negative voltage from off-chip, if necessary. GND 1 GND GND RFC GND VSS/GND V3 Pin 1 Mark GND Functional Block Diagram 24 23 22 21 20 19 Logic / Control 3 16 VDD GND 4 15 GND RF4 5 14 RF1 GND 6 13 GND 7 8 9 10 11 12 GND GND RF2 V1 GND 17 GND 2 RF3 V2 GND 18 QPC6044SQ Sample bag with 25 pieces QPC6044SR 7" Reel with 100 pieces QPC6044TR13 13" Reel with 2500 pieces QPC6044PCK401 5 MHz to 6000 MHz PCBA with 5-piece sample bag (c) 2015 RF Micro Devices, Inc. 5 MHz to 6000 MHz Operation Symmetrical SP4T. Non-Reflective (RFX ports) Terminated All-Off State mode No Blocking Caps Necessary unless voltage is on RF Line High Isolation: 54 dB at 2 GHz High Input IP3: +61 dBm 2 kV ESD +1.8 V Logic Compatible Applications Ordering Information Revision DS20170421 Features - 1 of 12 - Cellular, 3G, LTE Infrastructure WiBro, WiMAX, LTE High Performance Communications Systems Test Equipment Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Absolute Maximum Ratings Parameter Rating Units Supply Voltage +6 V Control Voltage -0.2 to +6 V -6 V +37.5 dBm VSS Supply Max RF Input Power, RFC/RFX nonterminated Max RF Input Power, RFX terminated +29 dBm Operating Temperature -40 to +105 C Storage Temperature -40 to +150 C +125 C Maximum Junction Temperature ESD Rating Human Body Model (HBM) 2000 Charge Device Model (CDM) 1000 Moisture Sensitivity Level Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000 ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. V - 2 Recommended Operating Conditions Specifications Parameter Min -40 Operating Temperature Range Typ +25 Operating Junction Temperature Max +105 Units C +125 C Supply Voltage +2.7 +5 +5.5 V VSS Supply (Applicable for off-chip negative supply, otherwise 0V (zero) for internal NVG operation) -5.5 -5 -2.7 V Electrical Specifications Parameter Specification Min Typ Max Units Conditions Test conditions unless otherwise noted: TA = +25 C, VCTRL = 0/+5 V, VDD = +3V to +5 V, 50 system Operating Frequency Range 5 Revision DS20170421 (c) 2015 RF Micro Devices, Inc. 50 MHz 0.87 dB 450 MHz 0.91 dB 900 MHz dB 2100 MHz 1.00 dB 2600 MHz 1.05 dB 4000 MHz 1.20 dB 6000 MHz 66 dB 450 MHz 61 dB 900 MHz 54 dB 2100 MHz 0.98 Insertion Loss Isolation (RFC - RFX) 6000 1.25 52 dB 2600 MHz 48.5 dB 4000 MHz 45.5 dB 6000 MHz - 2 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Electrical Specifications (contd.) Specification Parameter Min Typ Max Units Conditions Test conditions unless otherwise noted: TA = +25 C, VCTRL = 0/+5 V, VDD = +3V to +5 V, 50 system Isolation (RFX - RFX) Return Loss (RFX On-State) Return Loss (RFX Off-State) Input IP2 Input IP3 +55 Input P1dB 62 dB 450 MHz 57 dB 900 MHz 50 dB 2100 MHz 48 dB 2600 MHz 45 dB 4000 MHz 42 dB 6000 MHz 26 dB 450 MHz 25 dB 900 MHz 26 dB 2100 MHz 27 dB 2600 MHz 30 dB 4000 MHz 20 dB 6000 MHz 32 dB 450 MHz 28 dB 900 MHz 23 dB 2100 MHz 22 dB 2600 MHz 20 dB 4000 MHz 6000 MHz 15 dB TBD dBm +61 dBm 1 GHz, 17 dBm/tone, 1 MHz tone spacing +37 dBm Settling Time 1 4 s 50% VCTRL to optimum functionality Start-up Time 5 25 s 90% VDD to full functionality Switching Speed 150 500 ns 50 % control to 10/90 % RF NVG Spur -104 dBm Internal NVG on. Electrical Specifications - Power Supply Parameter Specification Min Typ Max Units Conditions Test conditions unless otherwise noted: TA = +25 C, VDD = +3V to +5.0 V, Standard Application Circuit Supply Current (IDD) Control Current (V1, V2, V3) VSS Current 100 A VDD = +5 V 2 A VCTRL = +5 V 100 A VSS = -5 V, NVG is shut down. Low Control Voltage (V1, V2, V3) 0 +0.63 V +1.8 V Logic Compatible High Control Voltage (V1, V2, V3) +1.1 VDD V +1.8 V Logic Compatible Revision DS20170421 (c) 2015 RF Micro Devices, Inc. - 3 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Maximum Operating Power at High Temperature, CW, 50 MHz, 50 System Power (dBm) at each port Input Theta-J (C/W) 85C 105C RFC/ RFX - Active 1 35.4 32.2 56 RFX - Terminated (1 path) 27.8 24.8 66 RFX - Terminated (2 adjacent paths) 26.7 23.7 85 RFX - Terminated (all paths) 26.6 23.6 86 Notes: 1. For frequencies <50 MHz, maximum operating power at all temperatures should be at least 2 dB less than P1dB compression from plot. Truth Table - 3 Pin Control Truth Table - 2 Pin Control (V3 must be grounded) V1 0 V2 0 V3 0 MODE RFC-RF1 active V1 V2 1 0 RFC-RF1 active 1 0 0 RFC-RF2 active 0 1 RFC-RF2 active 0 1 0 RFC-RF3 active 1 1 RFC-RF3 active 1 1 0 RFC-RF4 active 0 0 RFC-RF4 active 0 0 1 All off 1 0 1 All off 0 1 1 All off 1 1 1 MODE Unsupported Revision DS20170421 (c) 2015 RF Micro Devices, Inc. - 4 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Typical Performance Insertion Loss vs. Frequency 0.0 Insertion Loss vs. Frequency 0.0 Temp.=+25 C -0.5 -0.5 RF2 |S21| (dB) |S21| (dB) RF1 -1.0 RF3 -1.0 RF4 +105 C -1.5 -1.5 +85 C +25 C -40 C -2.0 -2.0 0 1 2 3 4 5 6 7 8 0 1 2 Frequency (GHz) RFX (Terminated) Return Loss vs. Frequency 0 -5 6 7 8 Temp.=+25 C -10 +25 C -15 -40 C -20 |S22| (dB) |S22| (dB) 5 -5 +85 C -15 4 RFX (Terminated) Return Loss vs. Frequency 0 +105 C -10 3 Frequency (GHz) -25 -30 -20 -25 RF1 -30 RF2 RF3 -35 -35 -40 -40 -45 -45 -50 RF4 -50 0 1 2 3 4 5 6 7 8 0 1 2 Frequency (GHz) RFX (Active) Return Loss vs. Frequency 4 5 6 7 8 RFX (Active) Return Loss vs. Frequency 0 -5 -5 -10 -10 -15 -15 RF1 +105 C -20 |S22| (dB) |S22| (dB) 0 3 Frequency (GHz) +85 C -25 +25 C -40 C -30 RF2 RF3 -20 RF4 -25 -30 -35 -35 -40 -40 -45 -45 -50 -50 0 1 2 3 4 5 6 7 8 Revision DS20170421 (c) 2015 RF Micro Devices, Inc. 0 1 2 3 4 5 6 7 8 Frequency (GHz) Frequency (GHz) - 5 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Typical Performance (continued) Input IP3 vs. Frequency 65 Input IP3 vs. Frequency 65 Temp.=+25 C 60 +105 C Input IP3 (dBm) Input IP3 (dBm) 60 +85 C 55 +25 C -40 C 50 45 55 RF1 RF2 RF3 RF4 50 45 40 40 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 Frequency (GHz) Input P1dB vs. Frequency 40.0 2.5 3 3.5 4 7 8 RFX - RFX Isolation vs. Frequency 0 Temp.=+25 C (RF3 - RF2, RF3 On) -10 37.5 -20 -30 35.0 |S12| (dB) Input P1dB (dBm) 2 Frequency (GHz) 32.5 30.0 -40 -50 +105 C -60 +85 C +25 C -70 -40 C -80 27.5 -90 -100 25.0 0 10 20 30 40 50 60 70 80 90 0 100 1 2 RFX - RFX Isolation vs. Frequency 0 RF4 On -10 3 4 5 6 Frequency (GHz) Frequency (MHz) RFC - RFX Isolation vs. Frequency 0 Temp.=+25 C RF4 On -10 Temp.=+25 C -20 -20 -30 -30 |S12| (dB) |S12| (dB) RF4 - RF1 -40 RF4 - RF2 RF4 - RF3 -50 -60 -40 RFC - RF1 RFC - RF2 -50 RFC - RF3 -60 -70 -70 -80 -80 -90 -90 -100 -100 0 1 2 3 4 5 6 7 8 Revision DS20170421 (c) 2015 RF Micro Devices, Inc. 0 1 2 3 4 5 6 7 8 Frequency (GHz) Frequency (GHz) - 6 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Typical Performance (continued) RFX - RFX Isolation vs. Frequency 0 RF3 On -10 RFC - RFX Isolation vs. Frequency 0 Temp.=+25 C RF3 On -10 -20 -20 RF3 - RF1 -30 -30 RFC - RF1 -40 |S12| (dB) RF3 - RF2 |S12| (dB) Temp.=+25 C RF3 - RF4 -50 -60 RFC - RF4 -50 -60 -70 -70 -80 -80 -90 -90 -100 RFC - RF2 -40 -100 0 1 2 3 4 5 6 7 8 0 1 2 Frequency (GHz) RFX - RFX Isolation vs. Frequency 0 RF2 On -10 Temp.=+25 C 5 6 7 8 RF2 On -10 Temp.=+25 C -20 -30 -30 RF2 - RF1 RFC - RF1 RF2 - RF3 -40 |S12| (dB) |S12| (dB) 4 RFC - RFX Isolation Loss vs. Frequency 0 -20 RF2 - RF4 -50 -60 -40 RFC - RF3 -50 RFC - RF4 -60 -70 -70 -80 -80 -90 -90 -100 -100 0 1 2 3 4 5 6 7 8 0 1 2 Frequency (GHz) RF1 On -10 3 4 5 6 7 8 Frequency (GHz) RFX - RFX Isolation vs. Frequency 0 RFC - RFX Isolation vs. Frequency 0 Temp.=+25 C RF1 On -10 -20 Temp.=+25 C -20 -30 -30 RF1 - RF2 RF1 - RF3 -40 |S12| (dB) |S12| (dB) 3 Frequency (GHz) RF1 - RF4 -50 -60 RFC - RF3 -50 RFC - RF4 -60 -70 -70 -80 -80 -90 -90 -100 RFC - RF2 -40 -100 0 1 2 3 4 5 6 7 8 Frequency (GHz) Revision DS20170421 (c) 2015 RF Micro Devices, Inc. 0 1 2 3 4 5 6 7 8 Frequency (GHz) - 7 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Evaluation Board Schematic and PCB - 5MHz to 6000 MHz Application Circuit Note: The QPC6064-410 PCB is used within the family of QPC60x4 products based on the individual BOM per product. Evaluation Board Bill of Materials (BOM) - 5 MHz to 6000 MHz Application Circuit Description Reference Designator Manufacturer Manufacturer's P/N - Viasystems Technologies Corp. QPC6064-410(B) C1-C5 Taiyo Yuden RM UMK105CG101JV-F J1 - J4, J6 Amphenol RF Asia Corp 901-10425 CONN, HDR, ST, PLRZD, 6-PIN P1 AMP 640454-6 QPC6044 U1 RFMD / Qorvo QPC6044 Evaluation Board CAP, 100 pF, 5 %, 50 V, COG, 0402 CONN, SMA EL FLT VIPER, MAT-21-1038 Revision DS20170421 (c) 2015 RF Micro Devices, Inc. - 8 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo GND RFC GND VSS/ GND V3 Pin1 Mark GND Pin Configuration and Description 24 23 22 21 20 19 2 17 V1 GND 3 16 VDD GND 4 15 GND RF4 5 14 RF1 6 13 GND Top view GND 7 8 9 10 11 12 GND GND RF2 V2 GND 18 GND 1 RF3 GND GND Backside Pad Pin Label Description 1 - 4, 6, 7, 9, 10, 12, 13, 15, 21, 23, 24 GND Connect to Low inductive Path to Ground 5 RF4 RF Port 4 8 RF3 RF Port 3 11 RF2 RF Port 2 14 RF1 RF Port 1 16 VDD Supply Voltage 17 V1 Control Pin 18 V2 Control Pin 19 V3 Control Pin 20 VSS/GND Negative Voltage Generator (NVG) control pin. Supply GND (Low inductive path to ground) to enable internal NVG or supply -2.7 V to -5 V to disable internal NVG. Once disabled, internal NVG cannot be enabled without cycling VDD. 22 RFC RF common Port Backside Pad GND Connect to Low inductive Path to Ground Revision DS20170421 (c) 2015 RF Micro Devices, Inc. - 9 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Package Marking Revision DS20170421 (c) 2015 RF Micro Devices, Inc. - 10 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Package Outline (Dimensions in millimeters) PCB/ PCB Soldermask/ PCB Stencil Drawing (Dimensions in millimeters) Revision DS20170421 (c) 2015 RF Micro Devices, Inc. - 11 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com QPC6044 RFMD + TriQuint = Qorvo Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.rfmd.com Email: customer.support@qorvo.com Tel: 1-844-890-8163 For information about the merger of RFMD and TriQuint as Qorvo: Web: www.qorvo.com Important Notice The information contained herein is believed to be reliable. RFMD makes no warranties regarding the information contained herein. RFMD assumes no responsibility or liability whatsoever for any of the information contained herein. RFMD assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for RFMD products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. RFMD products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Revision DS20170421 (c) 2015 RF Micro Devices, Inc. - 12 of 12 - Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com