SD CONNECTOR LC P -G F 40 KA JST A Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 5V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/50m max. (signal part) After environmental testing/80m max. (signal part) * Insulation resistance: 1,000M min. * Withstanding voltage: 500V AC/minute * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Designed for the SD (secure digital) memory card. Also applicable to the MMC (multi-media card). * Push-push mechanism * Card-detection switch * Static electricity shielding PC board layout 9.75 0.05 8.05 0.05 5.00.05 18.0 0.05 +0.1 2-3.2 0 29.5 0.05 +0.1 2-1.1 0 13.0 0.05 2.5 0.05 8.0 0.05 13.5 0.05 18.0 0.05 22.00.05 2.30.05 9.3750.05 +0.1 14-0.9 -0 11.50.05 13.5 0.05 0.05 13.9 0.05 14.10.05 14.5 0.05 13.7 4.4 Connector Model No. Q'ty / box SD-C-9BND-P23-332 60 30.5 Material and Finish (6.5) PC board surface 32.2 (3.15) Position of card center Housing: LCP, UL94V-0 Cover: LCP, UL94V-0 Guide: LCP, UL94V-0 Signal contact: Phosphor bronze, nickel-undercoated, gold-plated Write protect switch: Phosphor bronze, nickel-undercoated, gold-plated Terminal: Phosphor bronze, nickel-undercoated, gold-plated Card detection switch: Phosphor bronze, nickel-undercoated, gold-plated Joint rod: Kovar Spring: SWPB, nickel-plated GND contact: Phosphor bronze, tin-plated (reflow treatment) Shaft: Brass 5.65 RoHS compliance 1