2801533 - Phoenix Contact - Product.Network

https://www.phoenixcontact.com/us/products/2801533

09/10/2014Page1/6

Lightning/surge arrester type 1/2-VAL-MS-T1/T2 48/12.5/1+1V-

FM-2801533

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Universal varistor-based plug-in lightning/surge arrester for 48 V DC applications with grounded return conductor

(positive pole), without risk assessment for Lightning Protection Levels III and IV, with remote indication contact.

The figure shows the VAL-MS-T1/T2

75/12.5/1+1V-FM version.

  

Key commercial data

Packing unit 1 pc

Weight per Piece (excluding packing) 280.0 GRM

Custom tariff number 85363030

Country of origin Germany

Technical data

Dimensions

Height 97 mm

Width 35.6 mm

Depth 77.5 mm

Horizontal pitch 2 Div.

Ambient conditions

Degree of protection IP20

IP20

Ambient temperature (operation) -40 °C ... 80 °C

Altitude ≤ 2000 m (NN)

General

https://www.phoenixcontact.com/us/products/2801533

09/10/2014Page2/6

Lightning/surge arrester type 1/2-VAL-MS-T1/T2 48/12.5/1+1V-

FM-2801533

Technical data

General

Housing material PBT / PA

Inflammability class according to UL 94 V0

Color black

Standards for air and creepage distances DIN EN 60664-1

EN 61643-11

Mounting type DIN rail: 35 mm

Type DIN rail module, two-section, divisible

Number of positions 1

Surge protection fault message Optical, remote indicator contact

Direction of action L-L / L-PE

Protective circuit

IEC test classification I / II

T1 / T2

EN type T1 / T2

Nominal voltage UN60 V AC

60 V DC

- 48 V DC (RRH)

Maximum continuous operating voltage UC75 V AC

100 V DC

UT (TOV-proof) 100 V AC (5 s)

130 V DC (5 s)

Nominal frequency fN50 Hz (60 Hz)

Rated load current IL80 A (with serial 16mm² through wiring)

Residual current IPE ≤ 0.6 mA

Standby power consumption PC≤ 90 mVA

Max. discharge current Imax (8/20) µs 30 kA

Nominal discharge current In (8/20) µs 12.5 kA

Impulse discharge current (10/350)µs charge 6.25 As

Impulse discharge current (10/350)˽µs, specific energy 39 kJ/Ω

Impulse discharge current (10/350)˽µs, peak value limp 12.5 kA

Voltage protection level Up≤ 0.4 kV

Residual voltage ≤ 0.4 kV

≤ 0.35 kV (at 10 kA)

≤ 0.3 kV (at 5 kA)

≤ 0.25 kV (at 3 kA)

https://www.phoenixcontact.com/us/products/2801533

09/10/2014Page3/6

Lightning/surge arrester type 1/2-VAL-MS-T1/T2 48/12.5/1+1V-

FM-2801533

Technical data

Protective circuit

≤ 0.275 kV (at 4 kA)

Response time ≤ 25 ns

Max. backup fuse with branch wiring 160 A (gL/gG)

Max. backup fuse with V-type through wiring 80 A (gL / gG)

Short-circuit resistance IP with max. backup fuse (effective) 25 kA

Connection, protective circuit

Connection method Screw connection

Connection type IN Biconnect screw terminal block

Connection type OUT Biconnect screw terminal block

Connection method Biconnect terminal block

Screw thread M5

Tightening torque 4.5 Nm

30 lbf-in. (UL)

Stripping length 16 mm

Conductor cross section stranded min. 1.5 mm²

Conductor cross section stranded max. 25 mm²

Conductor cross section solid min. 1.5 mm²

Conductor cross section solid max. 35 mm²

Conductor cross section AWG/kcmil min. 15

Conductor cross section AWG/kcmil max 2

AWG conductor cross section 2 ... 10 (UL)

Tightening torque 30 lbf-in. (UL)

Remote indicator contact

Switching function PDT, 1-pos.

Connection method Screw connection

Screw thread M2

Tightening torque 0.25 Nm

4 lbf-in. (UL)

Stripping length 7 mm

Conductor cross section stranded min. 0.14 mm²

Conductor cross section stranded max. 1.5 mm²

Conductor cross section solid min. 0.14 mm²

Conductor cross section solid max. 1.5 mm²

Conductor cross section AWG/kcmil min. 28

Conductor cross section AWG/kcmil max 16

https://www.phoenixcontact.com/us/products/2801533

09/10/2014Page4/6

Lightning/surge arrester type 1/2-VAL-MS-T1/T2 48/12.5/1+1V-

FM-2801533

Technical data

Remote indicator contact

AWG conductor cross section 30 ... 14 (UL)

Maximum operating voltage Umax. AC 250 V AC

Max. operating current Imax 1.5 A AC (250 V AC)

1.5 A DC (30 V DC)

Standards and Regulations

Standards/regulations IEC 61643-11 2011

EN 61643-11 2012

UL 1449 ed. 3

Classifications

eCl@ss

eCl@ss 4.0 27140201

eCl@ss 4.1 27130801

eCl@ss 5.0 27130801

eCl@ss 5.1 27130801

eCl@ss 6.0 27130802

eCl@ss 7.0 27130802

eCl@ss 8.0 27130802

ETIM

ETIM 3.0 EC000941

ETIM 4.0 EC000381

ETIM 5.0 EC000943

UNSPSC

UNSPSC 6.01 30212010

UNSPSC 7.0901 39121610

UNSPSC 11 39121610

UNSPSC 12.01 39121610

UNSPSC 13.2 39121620

Approvals

https://www.phoenixcontact.com/us/products/2801533

09/10/2014Page5/6

Lightning/surge arrester type 1/2-VAL-MS-T1/T2 48/12.5/1+1V-

FM-2801533

Approvals

UL Recognized / cUL Recognized / KEMA-KEUR / VDE Zeichengenehmigung / CCA / IECEE CB Scheme / cULus Recognized

Ex Approvals

Approvals submitted

Approval details

UL Recognized

cUL Recognized

KEMA-KEUR

VDE Zeichengenehmigung

CCA

IECEE CB Scheme

cULus Recognized

https://www.phoenixcontact.com/us/products/2801533

09/10/2014Page6/6

Lightning/surge arrester type 1/2-VAL-MS-T1/T2 48/12.5/1+1V-

FM-2801533

Drawings

Circuit diagram

http://www.phoenixcontact.com