1-329631-2 - TE CONNECTIVITY

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors (50 ohm/75 ohm)

Product Facts

■Bayonet lock coupling for

quick connect/disconnect

■Various connectors available

in 50 and 75 ohm versions

■Fully intermateable with

comparable BNC UG/U

connectors

■Full range of Hex Crimp

and O Crimp Products for

common coaxial cables.

■Low VSWR

■Single crimp connectors

offer one crimping operation

for fast application

■Twist-on connectors require

no special tooling for

application to the cable

■Field serviceable (Category

A) connectors qualified to

MIL-C-39012

■Field replaceable (Category

C) plugs with captivated

center contact

■Field replaceable plugs can

be terminated with industry

standard tooling

■Tarnish resistant Nickel

finish available

■Choice of different dielectrics

■Listed under the Component

Program of Underwriters

Laboratories Inc.,

File No. E81956

■PC Board soldered

connectors are recognized

under the Component

Program of Underwriters

Laboratories Inc.,

File No. E81956

■Certified by Canadian

Standards

Association

File No. LR 7189

Between Series Adapters

For BNC Between Series Adapters, see

pages 251-260.

The Tyco Electronics BNC

RF connector family with

bayonet locking coupling

provides highly reliable,

quick connect/disconnect

coaxial connections.

Exclusive single and

O crimp terminations allow

positive insulation grip

and require no soldering,

providing terminations at

a very low overall applied

cost.

Available in both 50 and 75

ohm versions, these con-

nectors feature numerous

styles including cable plugs

and jacks, adapters and

printed circuit board con-

nectors. In addition to a

variety of crimp type termi-

nations, connectors are fur-

nished in field replaceable

and twist-on styles. These

connectors accept a wide

range of coaxial cables and

are intermateable with

industry standard connec-

tors designed to MIL-C-

39012 specifications.

Tyco Electronics can also

supply low cost alternatives

with an extensive commer-

cial type product line. A

lower cost consumer series

product offers the capability

to supply center contacts in

strip form and allow for auto-

mated center contact crimp

technology. All connectors

are designed around the

mil-specifications, but utilize

low-cost materials, offering

comparable mechanical

and electrical performance.

Product Specifications —

108-1275 — BNC Ohm Terminators

108-12020 — BNC O Crimp

Connectors

108-12044 — BNC Commercial Hex

Crimp

108-12047 — BNC Commercial and

Hex Crimp Connectors

108-12074 — BNC Solder Jacks

108-12075 — BNC Connectors

(Category A)

108-12078 — BNC Commercial PCB

Panel-Mount Jacks

108-12002 — BNC Commercial

T Adapter

108-12095 — BNC Commercial 75

Ohm Connectors

108-12096 — BNC Commercial Feed-

Thru and Bulkhead

Adapters

108-12079 — BNC Commercial 50

Ohm Solder Jacks

108-12103 — BNC Commercial PCB

Press Fit Jacks

Application Specifications —

114-12001 — BNC Commercial PCB

Jack Press Fit

Performance Specifications —

Page 45

Material Specifications — Page 46

Tooling — Pages 266-268

Military Category — All MIL type

O crimp connectors are Category B Type

(Tyco Electronics Crimp Tooling), unless

otherwise noted.

Packaging — All MIL Type connectors

are packaged individually, all O crimp

connectors are bulk packaged and all Hex

crimp connectors are individually pack-

aged unless otherwise noted.

Related Product Data

BNC Connectors (50 ohm/75 ohm) Performance Specifications

Single Category B Straight Right-Angle Commercial Commercial Commercial PC Commercial

Characteristics Crimp O Crimp Solder Solder O Crimp O Crimp Board Solder

(MIL Type) (MIL Type) Clamp Clamp & Hex Crimp & Hex Crimp 50 & 75 Ohms 50 Ohm Jacks

50 Ohms 75 Ohms

Electrical

Impedance, Nom. 50 50 50 50 50 75 50 & 75 50 & 75

(Ohms)

Working Voltage 500 500 500 500 500 500 500 500

(Volts RMS)

Contact Resistance Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 2.0 Inner: 2.0 Inner: 6/1.5 Inner: 2.75

(Milliohms) Outer: 0.3 Outer: 0.2 Outer: .20 Outer: .20 Outer: 1.0 Outer: 2.0 Outer: 3/0.2 Outer: 1.0

Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000 5000

(Megohms)

Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500 1500

Voltage (VAC)

Corona Level at 70,000 ft. 375 375 375 375 375 375 — 375

(Volts, RMS)

RF Leakage, Max. —-55 at -55 at -55 at -55 at -55 at ——

(dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz 1-2 GHz

RF Insertion Loss, —0.2 at 0.2 at 0.3 at 0.2 at 0.15 at ——

Max. (dB) 3 GHz 3 GHz 3 GHz 3 GHz 2 GHz

Frequency Range 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 and 0-4

(GHz) 0-2

VSWR in Frequency 1.35 1.30 1.30 1.35 1.30 1.30 — —

Range Max.

Mechanical

Force to Engage (lbs. [N])/couple, 13.3/11.12 13.3/11.12 13.3/.028 13.3/.028 26.7/26.69 26.7/26.69 ——

(in-lbs. [N-M]) max. [3/2.5] [3/2.5] [3/2.5] [3/2.5] [6/6.0] [6/6.0]

Coupling Nut Retention, 444.8 444.8 444.8 444.8 266.9 266.9 ——

Min. N [lbs.] [100] [100] [100] [100] [60] [60]

Cable Retention, 266.9 [60] 266.9 [60] 177.9 [40] 177.9 [40] 266.9 [60] 266.9 [60] 266.9 [60] —

N [lbs.] (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (PCB Ret)

Durability (Cycles) 500 500 500 500 500 500 500 500

Jam Nut Mounting Torque, 25 25 25 —25 25 253/12425

Max. [N•m] (in. lbs.) [2.8] [2.8] [2.8] [2.8] [2.8] [2.8/1.4] [2.8]

Environmental

Temperature Range, -65 to +85 -65 to +1651-65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165

Operating (C°) -55 to +852

MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202

Vibration Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204

Cond. B Cond. B Cond. B Cond. B Cond. III Cond. B Method 201A Cond. B

MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202

Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213

Cond. G, 50 G’s Cond. G, 50 G’s Cond. G Cond. G Cond. G, 100 G’s Cond. I, 100 G’s Cond. I or A, 50 G’s Cond. I, 100 G’s

MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202

Thermal Shock Method 1003

Method 107 Method 107 Method 107 Method 107 Cond. A Method 107 Method 107 Method 107

Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202

Method 1002

Resistance Method 106 Method 106 Method 106 Method 106 Type II Method 106 Method 106 Method 106

MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202

Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101

Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B

Product 108-12002 108-12020 — — 108-12044 108-12095 108-12078 108-12079

Specification 108-12047

1Assembled to cable with polytetrafluorethylene dielectric.

2Assembled to cable with polyethylene dielectric.

3For Metal Threads

4For Polyester Threads

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued)

Single Category Straight Right-Angle Commercial Commercial Commercial Commercial

Connector Crimp B & C Solder Solder O Crimp PCB PCB Solder

Component (MIL Type) O Crimp Clamp Clamp Hex Crimp & Solder Press Fit Ohm Jacks Adapters

(MIL Type) Terminators

Connector Material

Collar Brass Brass Brass Brass Brass QQ-B-626 —— —

Brass

QQ-B-626 QQ-B-626 Zinc QQ-Z-363 QQ-B-626

Brass Brass

Outer Contact QQ-B-626 Phos. Bronze Brass Brass Brass —— —

QQ-B-626

(Plug) Beryl. Copper QQ-B-750 MIL-C-21768 Beryl. Copper

QQ-C-530 QQ-C-530

Zinc

Shell Brass Brass Brass — Zinc Zinc Zinc QQ-Z-363 Brass

(Jack) QQ-B-626 QQ-B-626 QQ-Z-363 QQ-Z-363 QQ-Z-363 Brass QQ-B-626

QQ-B-626

PTFE

Polyethylene

PTFE PTFE

Dielectric MIL-P-19468

PTFE PTFE PTFE

Polypropylene Polymethylpentene

PTFE

MIL-P-19468 MIL-P-19468

Polypropylene MIL-P-19468 Polymethylpentene Gen. Purpose1MIL-P-19468 Polyester PBT Polypropylene,

Gen. Purpose Gen. Purpose MIL-P-24519 Gen. Purpose

Brass

Center Contact Brass Brass Brass Brass Brass —— —

QQ-B-626

(Plug) QQ-B-626 QQ-B-626 QQ-B-626 Beryl. Copper

QQ-C-530

Beryl. Copper Beryl. Copper Phos. Bronze Phos. Bronze

Center Contact ASTM-B-643 ASTM-B-643 Beryl. Copper Beryl. Copper Beryl. Copper Phos. Bronze Beryl. Copper QQ-B-570 QQ-B-570

(Jack) QQ-C-530 QQ-C-530 QQ-C-530 QQ-B-750 QQ-C-530 Beryl. Copper Beryl. Copper

QQ-C-530 QQ-C-530

Gasket Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber —— —

Silicon Rubber

QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765

Ferrule Copper Copper ——

Copper —— ——

QQ-C-576 QQ-C-576 QQ-C-576

Connector Primary Finishes2

Silver Silver Silver

Collar QQ-S-365 QQ-S-365 Silver/ Silver/ Bright Nickel —— —

QQ-S-365

Bright Nickel Bright Nickel Bright Nickel Bright Nickel QQ-N-290 Bright Nickel

QQ-N-290 QQ-N-290 QQ-N-290

Silver Bright or Silver

Outer Contacts QQ-S-365 QQ-S-365 Silver/ Silver/ Matte Nickel Bright Nickel Bright Nickel Bright Nickel QQ-S-365

(Plug & Jack) Gold Bright Nickel Bright Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel

QQ-N-290 QQ-N-290

Tin Lead Tin Lead Tin Lead Silver

Center Contacts MIL-G-45204 Gold Gold Gold ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365

(Plug & Jack) Silver MIL-G-45204 Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold

Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204

Silver

Ferrule3QQ-S-365 QQ-S-365 ——

Tin Lead —— ——

Tin Lead ASTM-B-545

ASTM-B-545

1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519.

2If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification.

3Ferrules with tin-lead finish are used with nickel plated outer contacts.

BNC Connectors, 50 Ohm

Max.

14.53

[.572]

Dia. Max.

Plugs, Crimp

Max.

Single Crimp

14.53

[.572]

Dia. Max.

Hex and O Crimp

Interchangeable Dies

CERTI-CRIMP for PRO-CRIMPER Interchangeable

RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.

Cable Type Plating Dielectric Style Lwith or Tool 69710-1

Integral Die PRO-CRIMPER & 626 Pneu.

Adapter 679304-1 Head 318161-1

178, 178A, 33.33

178B, Single Crimp Silver

PTFE

MIL Type 69245-4 — 69471-5330876-0

196, 196A 1.312

Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-3 — 2-5221128-1

1.320

O Crimp Nickel Polyethylene Commercial 27.69 220009-5 318450-2 220217-3 1-5227079-6

174, 1.090

188, 188A,

O Crimp Nickel

PTFE

MIL Type 30.18 —1424050-1 220026-1 5225395-7

316 1.188

Single Crimp Silver

PTFE

MIL Type 33.33 69245-2 — 69422-2-5330061-1

1.312

Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-3 — 2-5221128-3

179, 179A, 1.320

179B, 161, O Crimp Nickel Polyethylene Commercial 27.69 —1424050-1 220217-3 2-5227079-2

187, 187A, 1.090

BELDEN O Crimp Nickel

PTFE

MIL Type -30.18 ——220026-1 5225395-8

9221 1.188

Single Crimp Silver

PTFE

MIL Type 33.33 —91910-1 69408-2-5329446-1

1.312

RD 316, 188, O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 — 8-5227079-2

Double Braid 1.090

Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—2-5221128-7

BELDEN 1.320

8219 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 6-5227079-73

1.090

BELDEN 9907,

89907 COMM/ O Crimp Nickel Polyethylene Commercial 27.69 220187-1 318452-2 220217-1 6-5227079-84

SCOPE 2104 1.090

O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 58376-1 1-5227079-9

BELDEN 1.090

8218 O Crimp Nickel

PTFE

MIL Type 30.18 —91904-1 69669-2 1-5225395-0

1.188

1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.

2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.

3For use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only.

4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

BELDEN is a trademark of Belden Wire

and Cable Company.

COMM/SCOPE is a trademark of

Commscope, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Plugs, Crimp (Continued)

Max.

14.53

[.572]

Dia. Max.

Max.

Single Crimp

14.53

[.572]

Dia. Max.

Hex and O Crimp

Interchangeable Dies

CERTI-CRIMP for PRO-CRIMPER Interchangeable

RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.

Cable Type Plating Dielectric Style Lwith or Tool 69710-1

Integral Die PRO-CRIMPER & 626 Pneu.

Adapter 679304-1 Head 318161-1

Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—5221128-13

1.320

O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 5227079-5

58, 58A, 1.090

58B, 58C O Crimp Nickel

PTFE

MIL Type 33.74 269478-1 220189-3 69727-5225395-1

1.328

Single Crimp Silver

PTFE

MIL Type 33.33 2—91904-4 69223-1 2-5329444-1

1.312

BELDEN Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—1-5221128-0

88240, 1.320

BERK-TEK O Crimp Nickel Polyethylene Commercial 33.33 220187-1 58435-11220217-1 4-5227079-3

BTDC-58, 1.312

COMM/ O Crimp Nickel

PTFE

MIL Type 33.33 269478-1 220189-3 69727-4-5225395-2

SCOPE 2135 1.312

O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 5227079-6

223, 1.280

55, 55A, O Crimp Nickel

PTFE

MIL Type 43.64 269478-1 220189-3 69727-5225395-3

55B 1.718

Single Crimp Silver

PTFE

MIL Type 33.33 —91904-3 69424-2-5329444-2

1.312

O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 6-5227079-1

1.090

142, 142A, O Crimp Nickel

PTFE

MIL Type 30.18 269478-1 220189-3 69727-5225395-6

142B, 400 1.188

Single Crimp Silver

PTFE

MIL Type 33.33 269331-1 — 69429-1 2-5330358-2

1.312

Consult Tyco Electronics for recommended crimp tooling.

1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.

2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.

3Bulk packaged.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

BELDEN is a trademark of Belden Wire

and Cable Company.

BERK-TEK is a trademark of Nexans, Inc.

COMM/SCOPE is a trademark of

Commscope, Inc.

BNC Connectors, 50 Ohm (Continued)

Plugs, Crimp (Continued)

Interchangeable Dies

CERTI-CRIMP for PRO-CRIMPER Interchangeable

RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.

Cable Type Plating Dielectric Style Lwith or Tool 69710-1

Integral Die PRO-CRIMPER & 626 Pneu.

Adapter 679304-1 Head 318161-1

Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—1-5221128-1

1.320

O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-11220217-2 5227079-7

124, 140, 210, 1.090

62, 62A, 62B, O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-11220217-2 1-5227079-159, 59A, 59B, 1.090

BELDEN 9291,

O Crimp Nickel

PTFE

MIL Type 30.18 —58537-1 — 5225395-2

9209, 9269 1.188

Single Crimp Silver

PTFE

MIL Type 33.33 69141-1 — — 2-5329445-1

1.312

302, BELDEN

88241, 89269, Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—1-5221128-1

Hi-Temp 62A, 1.320

Times PL62,

BERK-TEK, BTDC-59, O Crimp Nickel

PTFE

MIL Type 34.14 69477-1 58537-1 69669-1 4-5225395-1

BTDC-62 1.344

Hi-Temp 59,

Times PL59, O Crimp Nickel Polyethylene Commercial 33.33 —58537-1 — 5-5227079-3

PLF59 (20 AWG C.C.) 1.312

BELDEN

9104, 9240, Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—1-5221128-7

9112, 9167, 1.320

9259, 9266,

Times O Crimp Nickel

PTFE

MIL Type 30.94 —258537-1 69669-1 2-5225395-0

FM-59 1.218

BELDEN 8281,

9141, 9231, Single Crimp Silver Polypropylene MIL Type 41.50 69652-—220000-1 5330878

Western Electric 1.634

724, 728, 3049

8, 8A, O Crimp Silver

PTFE

MIL Type 27.31 220015-1 — — 5225886-1

213 1.075

11, 11A O Crimp Silver

PTFE

MIL Type 47.63 220015-1 — — 5225886-4

1.875

BELDEN 9914, O Crimp Silver

PTFE

MIL Type 47.63 220015-1 — — 5225886-7

Times FM-8 1.875

Alpha 9847, O Crimp Silver

PTFE

MIL Type 47.63 220015-1 — — 225886-5

BELDEN 8213, 9292 1.875

9, 9A, 9B, O Crimp Silver

PTFE

MIL Type 52.38 220015-1 — — 5225886-1

214 2.062

1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.

2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.

2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1

Max.

14.53

[.572]

Dia. Max.

Max.

Single Crimp

14.53

[.572]

Dia. Max.

Hex and O Crimp

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

BELDEN is a trademark of Belden Wire

and Cable Company.

BERK-TEK is a trademark of Nexans, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Right-Angle Plugs,

Crimp

Max.

14.53

[.572]

Dia. Max.

26.57

[1.046] L

Max.

14.53

[.572]

Dia. Max.

26.57

[1.046]

Single Crimp Hex and O Crimp

Interchangeable Dies

CERTI-CRIMP for PRO-CRIMPER Interchangeable

RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand

Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.

Plating Integral Die PRO-CRIMPER & 626 Pneu.

Adapter 679304-1 Head 318161-1

174, 188, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-3 — 5413959-3

188A, 316

pentene 1.553

Single Crimp Gold Silver

PTFE

MIL Type 44.45 — 91910-1 69422-5331178-0

1.750

179, 179A, 39.45

179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial 1.553 — 58436-3 — 5413959-4

187, 187A, pentene

BELDEN 9221

180, 180A, 180B, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-3 — 5413959-5

195, 195A pentene 1.553

BELDEN 9907,

89907, 8219, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-1 — 5413959-6

COMM/SCOPE pentene 1.553

2104, 3104

Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-1 — 5413959-1

pentene 1.553

58, 58A, O Crimp Gold Nickel

PTFE

MIL Type 37.29 69478-1 220189-3 69727-1 5225974-1

58B, 58C 1.468

Single Crimp Gold Silver

PTFE

MIL Type 44.45 — 91904-1 69223-1 5331175-0

1.750

O Crimp Gold Nickel

PTFE

MIL Type 37.29 69478-1 220189-3 69727-1 5225974-2

55, 55A, 1.468

55B, 223 Single Crimp Gold Silver

PTFE

MIL Type 44.45 — 91904-3 69429-1 5331182-0

1.750

142, 142A, Single Crimp Gold Silver

PTFE

MIL Type 44.45 69331-1 — 69429-1 5331182-0

142B, 400 1.750

124, 140, 210,

62, 62A, 62B, 37.29

59, 59A, 59B, O Crimp Gold Nickel

PTFE

MIL Type 1.468 — 58537-1 69669-1 5225974-5

BELDEN 9291,

9209, 9269

38.10

[1.500]

14.53

[.572]

Dia. Max.

Plugs, Twist-On

Related Product Data

Twist-on jacks must be used with

cable that has a solid conductor.

These jacks are not recommended

for applications where the cable

frequently moves or flexes.

Mating Twist-On Plug —Page 50

RG/U Center Body Dielectric Style Part No.

Cable Contact Plating

59, 59A, 59B Gold Nickel Acetal Commercial 222428-1

40.14

[1.580] Max.

Panel Jacks, Crimp

28.96

[1.140]

Max. 2.77

[.109]

12.7 ±0.1

[.500 ±.004]

12.7 ±0.1

[.500 ±.004]

Recommended Panel Cutout

Interchangeable Dies

CERTI-CRIMP for PRO-CRIMPER Interchangeable

RG/U Termination Center Body Hand Tool Hand Tool 354940-1 Dies for Hand

Cable Type Contact Plating Dielectric Style with or Tool 69710-1 Part No.

Plating Integral Die PRO-CRIMPER & 626 Pneu.

Adapter 679304-1 Head 318161-1

174, 188, 188A, 316 O Crimp Gold Nickel

PTFE MIL Type

— 1424050-1 220026-1 5225397-7

58, 58A, 58B, 58C O Crimp Gold Nickel

PTFE MIL Type

-69478-1 91901-1 69727-5225397-1

124, 140, 210, 62, 62A, 62B,

59, 59A, 59B, BELDEN 9291, O Crimp Gold Nickel

PTFE MIL Type

-69477-1 258537-1 269669-1 5225397-2

9209, 9269, 89269

Dia.

11.2

[.441] Dia.

17.84

[.702] Max.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

BELDEN is a trademark of Belden Wire

and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Bulkhead Jacks,

Crimp

Note: Panel Insulating

Bushings — Page 54

Max.

11.04

[.435]

Min.

12.82

[.505]

Dia. Min.

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Recommended

Panel Cutouts

Maximum Panel

Thickness 3.18 [.125]

Single Crimp Hex and O Crimp

H = 11/16" across flats, 20.32 [.800] Max. across points

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Interchangeable Dies

CERTI-CRIMP for PRO-CRIMPER Interchangeable

RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand

Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.

Plating Integral Die PRO-CRIMPER & 626 Pneu.

Adapter 679304-1 Head 318161-1

Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 —58436-3 — 5413771-3

pentene 1.450

O Crimp Gold Nickel Polypro- Commercial 34.93 ——220217-3 5228980-7

174, 188, pylene 1.375

188A, 316 O Crimp Gold Nickel

PTFE

MIL Type 35.71 ——220026-1 5225398-7

1.406

Single Crimp Gold Silver

PTFE

MIL Type 32.13 ——69422-2-5330063-1

1.265

179, 179A, O Crimp Gold Nickel

PTFE

MIL Type 35.71 —1424050-1 220026-1 5225398-8

179B, 161, 1.406

187, 187A, Single Crimp Gold Silver

PTFE

MIL Type 32.13 —91910-1 69408-2-5329458-1

BELDEN 9221 1.265

Times RD316 O Crimp Gold Nickel

PTFE

MIL Type 35.71 —91904-1 69669-2 1-5225398-5

1.406

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

BELDEN is a trademark of Belden Wire

and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Panel Insulating

Bushings for

Bulkhead Jacks

Material—Nylon

Note: Can not be used with single

crimp bulkhead jacks.

Part No. 330620 (2 Required)

14.73±0.13

[.580±.005]

Dia.

14.1±0.08

[.555±.003]

13.95

[.549]

Dia.

14.58

[.574]

5.46

[.215]

0.89

[.035]

0.81

[.032]

12.93

[.509]

Dia.

17.45

[.687]

Dia. Recommended Panel Cutout

Dia.

BNC Connectors, 50 Ohm (Continued)

Max.

Bulkhead Jacks,

Crimp (Continued)

Note: Panel Insulating Bushings —

at the bottom of this page

Single Crimp Hex and O Crimp

Interchangeable Dies

CERTI-CRIMP for PRO-CRIMPER Interchangeable

RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand

Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.

Plating Integral Die PRO-CRIMPER & 626 Pneu.

Adapter 679304-1 Head 318161-1

58, 58A,

58B, 58C,

BELDEN 88240, Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 —58436-1 — 5413771-1

BERK-TEK pentene 1.450

BTDC-58,

COMM/SCOPE 2135

O Crimp Gold Nickel Polypro- Commercial 34.93 220187-1 58435-11220217-1 5228980-5

pylene 1.375

58, 58A, O Crimp Gold Nickel

PTFE

MIL Type 41.28 —91901-1 69727-5225398-1

58B, 58C 1.625

Single Crimp Gold Silver

PTFE

MIL Type 32.13 —91904-4 69223-1 2-5329456-1

1.265

223, O Crimp Gold Nickel

PTFE

MIL Type 35.71 —91901-1 69727-5225398-3

55, 55A, 55B 1.406

142, 142A, O Crimp Gold Nickel

PTFE

MIL Type 35.71 —91901-1 69727-5225398-6

142B, 400 1.406

124, 140, 210,

62, 62A, 62B,

59, 59A, 59B, O Crimp Gold Nickel Polypro- Commercial 34.93 220187-2 58435-11220217-2 5228980-6

BELDEN 9291, pylene 1.375

9209, 9269

1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.

Max.

11.04

[.435]

Min.

12.82

[.505]

Dia. Min.

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Recommended

Panel Cutouts

Maximum Panel

Thickness 3.18 [.125]

H = 11/16" across flats, 20.32 [.800] Max. across points

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

BELDEN is a trademark of Belden Wire

and Cable Company.

BERK-TEK is a trademark of Nexans, Inc.

COMM/SCOPE is a trademark of

Commscope, Inc.

BNC Connectors, 50 Ohm (Continued)

Dia. Max.

Max.

3/8" - 32

Thread

Accepts 1.5 [.059]

Dia. Max. Wire

Bulkhead Solder Jacks,

Front Mount

Body Plating —Nickel

Without Solder Terminal

Dia. Max.

Max.

3/8" - 32

Thread

Accepts 1.5 [.059]

Dia. Max. Wire

22.23

[.875]

With Solder Terminal

Recommended Panel Cutout

.396/4.04

[.156/.159]

9.65/9.75

[.380/.384]

Dia.

Dimensions Panel Insulating Part No.

Contact Dielectric LW

Thickness Bushing Without Solder With Solder

Material Terminal* Terminal**

Silver VALOX 26.93 13.09 1.17-3.18 227223-1 or 5227754-3 5227755-3

1.060 .515 .046-.125 221951-1

33.33 13.09 1.17-6.35 227223-1 or —5227169-7

VALOX 1.312 .515 .046-.250 221951-1

26.93 13.09 1.17-3.18 227223-1 or 5227754-2 5227755-2

Gold 1.060 .515 .046-.125 221951-1

33.33 13.09 1.17-6.35 227223-1 or 5227169-4 5227169-8

PTFE

1.312 .515 .046-.250 221951-1

26.93 13.09 1.17-3.18 227223-1 or 5227715-3 5227716-3

1.060 .515 .046-.125 221951-1

33.33 13.09 1.17-6.35 227223-1 or —5227169-5

Tin VALOX 1.312 .515 .046-.250 221951-1

26.93 13.09 1.17-3.18 227223-1 or 5227754-1 5227755-1

1.060 .515 .046-.125 221951-1

**Includes lockwasher and jam nut.

**Includes solder terminal and jam nut.

Plugs, for JIS Cables, Crimp

Plating

Body — Nickel

Center Contact — Gold

14.53

[.572]

Dia. Max.

Max.

Interchangeable Dies

for PRO-CRIMPER

Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor

PRO-CRIMPER

Adapter 679304-1

3D-2V Hex Crimp Polyethylene 33.53 58436-1 3-5221128-1

1.320

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Insulating Bushings

Recommended

Panel Cutout

Recommended

Panel Cutout

1.78

[.070]

0.81

[.032]

12.7

[.500]

Dia.

3.94

[.155]

11.94

[.470]

11.43

[.450]

9.53

[.375]

Part No. 221951-1

Part No. 227223-1

12.83 ±0.08

[.505 ±.003]

Dia.

12.07±0.08

[.475 ±.003]

11.56 ±0.08

[.455 ±.003]

Dia.

10.97 ±0.06

[.432 ±.003]

0.94

[.030]

Max.

Dia.

15.88

[.625] Dia. 9.53

[.375] Dia.

10.93

[.430] Dia.

4.04

[.159] Max.

1.09

[.043] Max.

14.86

[.585] Dia.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

12.83

[.505]

Max.

3/8" - 24 Thread

26.80

[1.055]

Max.

Isolated Bulkhead Solder Jacks,

Front Mount

Plating

Body—Nickel

Dielectric

—White

VALOX

Panel Thickness 1.17-6.35 [.046-.250]

Recommended

Panel Cutout

31.75

[1.250]

13.09 Dia.

[.515] Max.

3/8" - 24

Thread

Accepts

1.5 [.059]

DIa. Max.

Wire

Panel Thickness 1.17-3.18 [.046-.125]

Recommended

Panel Cutout

Part No. 5414194-1

Plating

Body—Nickel

Center Contact —Silver

Dielectric

—Black

VALOX

Flange & Thread Material

—

Black

VALOX

Center Flange & Part

Contact Thread No.

Plating Material

TinVALOX 5227726-1

Silver VALOX 5227726-2

Gold VALOX 5227726-3

Max.

9.91

[.390 ]

+0.13

-0.20

+.005

-.000

Dia.

3.89

[.153 ]

+0.08

-0.00

+.003

-.000

9.60

[.378 ]

+0.08

-0.00

+.003

-.000

Dia.

3.94

[.155 ]

+0.08

-0.00

+.003

-.000

Sealed Bulkhead Solder Jack,

Rear Mount

Part No. 5227426-1

17.78 Dia.

[.700] Max.

31.75

[1.250] Maximum Panel Thickness 6.35 [.250]

Recommended

Panel Cutout

1/2" - 28

Thread

Rubber

Gasket

Accepts .

1.5 [.059]

DIa. Max.

Wire

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Max.

Plating

Body—Nickel

Center Contact —Gold

Dielectric

—

Polymethylpentene

This connector is designed to prevent

moisture from entering the interface

from the rear of the connector.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Recommended PC Board Layouts

Without Mounting Posts With Mounting Posts

(Top View)

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

10.16 ±0.08

[.400 ±.003]

5.08 ±0.05

[.200 ±.002]

2.54 ±0.05

[.100 ±.002]

GS 0.89 ±0.08

[.035 ±.003]

2.64 [.104] Dia.

Clearance Hole for

2-56 Self-Tapping Screw*

(2 Holes)

5.08 ±0.05

[.200 ±.002]

2.01 ±0.05

[.079 ±.002]

(2 Holes)

Mating

Face

Right-Angle Jacks

PC Board/Panel Mount

Body—Nickel

Dielectric

—Polymethylpentene

AB34.93

[1.375]

Mtg. Hgt.

1/2-28 Thread 1/2-28 Thread

VALOX Body

AB34.93

[1.375]

Metal Body

Mtg. Hgt.

(Top View)

10.16 ±0.08

[.400 ±.003]

5.08 ±0.05

[.200 ±.002]

2.54 ±0.05

[.100 ±.002]

GS 0.89 ±0.08

[.035 ±.003]

5.08 ±0.05

[.200 ±.002]Mating

Face

Body Center Dimensions Part No.

Contact Without With LWith L

Material Plating ABC

Mounting Posts Mounting Posts Compliant Posts

Tin 8.59 21.21 15.88 5226990-1 5227161-1 3.48 ——

.338 .835 .625 .137

VALOX, Gold1 8.59 21.21 15.88 5226990-3 5227161-3 3.48 ——

White .338 .835 .625 .137

Gold1 6.91 21.21 13.18 —5227161-7 3.48 ——

.272 .835 .519 .137

Tin 8.59 21.21 15.88 —5227161-2 3.48 ——

.338 .835 .625 .137

Gold1 8.59 21.21 15.88 5226990-6 5227161-6 3.48 ——

VALOX, .338 .835 .625 .137

Black Gold1 6.91 21.21 13.18 —5227161-9 3.48 ——

.272 .835 .519 .137

Gold1 6.17 21.21 11.68 —5415046-1 —— —

.243 .835 .460

Tin 8.26 20.83 15.88 —5227661-1 3.48 ——

.325 .820 .625 .137

Gold1 8.26 20.83 15.88 5227676-1 5227677-1 3.48 ——

Metal .325 .820 .625 .137

Gold1 6.91 20.83 12.70 1274668-1 5413879-1 3.48 ——

.272 .820 .500 .137

Gold2 6.91 20.83 12.70 —5413879-2 3.48 ——

.272 .820 .500 .137

High Temp. Gold1 6.91 21.21 13.18 ———5415218-5 2.79

Housing .272 .835 .519 .110

Plating:

Gold1 — 0.00076 [.000030] thick

Gold2 — 0.00127 [.000050] thick

Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.

Mounting Post Style

Compliant Post

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Lockwasher and Jam Nut

Part No.

1-329632-2 Part No.

1-329631-2

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Vertical Jacks

PC Board/Panel Mount

Plating

Body—Nickel

Dielectric

—Polymethylpentene

10.16 ±0.08

[.400 ±.003]

5.08 ±0.05

[.200 ±.002]

5.08 ±0.05

[.200 ±.002]

2.64 [.104] Dia.

Clearance Hole

for 2-56

Self-Tapping

Screw* (2 Holes)

2.54 ±0.05

[.100 ±.002]

0.89 ±0.08

[.035 ±.003]

5.08 ±0.05

[.200 ±.002]

5.08 ±0.05

[.200 ±.002]

2.54 ±0.05

[.100 ±.002]

0.89 ±0.08

[.035 ±.003]

2.01 ±0.08

[.079 ±.003]

(2 Holes)

(Top View) (Top View)

1/2-28 Thread

34.93

[1.375]

Mtg. Hgt.

15.88

[.625]

1/2-28 Thread

34.93

[1.375]

Mtg. Hgt.

15.88

[.625]

* Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2.

Screw for thickness of less than 2.38 [.093] Part No. 221108-4.

Without Mounting Posts With Mounting Posts

10.16 ±0.08

[.400 ±.003]

10.16 ±0.08

[.400 ±.003]

10.16 ±0.08

[.400 ±.003]

VALOX Body Metal Body

Lockwasher and Jam Nut

Part No.

1-329632-2 Part No.

1-329631-2

Part No.

Body Center Dim. Dim. Without With

Material Contact BL

Mounting Mounting

Plating Posts Posts

Tin 21.21 3.48 5226993-1 5227222-1

VALOX, .835 .137

White Gold 21.21 3.48 5226993-3 5227222-3

.835 .137

Tin 21.21 3.48 5226993-2 5227222-2

VALOX, .835 .137

Black Gold 21.21 3.48 5226993-6 5227222-6

.835 .137

Tin 20.83 3.48 —5227671-1

Metal .820 .137

Gold 20.83 3.48 —5227673-1

.820 .137

Note: If an Insulating Bushing is required see part number 330620 and

Panel Cutout on page 54.

Recommended PC Board Layouts

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

8.59

[.338]

34.93

[1.375]

21.21

[.835]

15.88 [.625]

Mounting Height

1/2-28 Thread

Jacks with

Mounting Flanges

PC Board/Panel Mount

(Top View)

2.54

[.100]

11.43

[.450]

22.86 ±0.08

[.900 ±.003]

0.89 ±0.08

[.035 ±.003]

8.89

[.350]

3.3 [.130] Dia.

Clearance Hole

for 5-40 Screw

Lockwasher and Jam Nut

Part No.

1-329632-2 Part No.

1-329631-2

Mating

Face

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout Body Center Contact Part No.

Material Plating

VALOX, Tin 5226978-1

White Gold 5226978-3

Recommended PC Board Layout

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Vertical Metalized Jacks

PC Board Mount

17.45

[.687]

15.88

[.625] Drill Holes for

0.94 ±0.05 [.037 ±.002]

Dia. Pin (5 Places)

6.35 ±0.05

[.250 ±.002]

12.7 ±0.08

[.500 ±.003]

6.35 ±0.05

[.250 ±.002]

12.7 ±0.08

[.500 ±.003]

3.73

[.147]

4.32

[.170]

1.07 ±0.05

[.042 ±.002]Dia.

1.73 ±0.05

[.068 ±.002]Dia.

6.48

[.255]

7.47

[.294]

Style D

Style A

Style C

6.88 ±0.05

[.271 ±.003]

3.43 ±0.05

[.135 ±.002]

6.88 ±0.05

[.271 ±.003]

1.32 ±0.08

[.052 ±.003]Dia.

2.44 ±0.08

[.096 ±.003]

(4 Holes)

Dia.

15.88

[.625]

16.64

[.655]

Body Center Leg

Plating Contact Plating Dielectric Style Length L Part No.

Silver VALOX A6.35 5227699-1

.250

Gold VALOX A6.35 5227699-2

.250

TinVALOX A6.35 5227699-3

Nickel .250

Gold VALOX A3.81 5414460-11

.150

Silver VALOX C4.45 5222420-1

.175

Gold VALOX E6.35 5415189-1

.250

Gold

PTFE

B3.30 5413969-2

.130

Tin-Lead Silver VALOX C3.18 5414305-1

.125

Gold VALOX D3.43 5221123-2

.135

1With .76 [.030] standoffs on top of legs.

Style B

Drill Hole

to Receive

0.940.06

[.037±.002]

Dia. Pin,

5 Required

12.70 0.08

[.500 ±.003]

12.70 0.08

[.500 ±.003]

6.35 ±0.06

[.250 ±.002]

Style E (Panel Mount)

20.57

[.810]

6.88 ±0.08

[.271 ±.003]

3.43 ±0.08

[.135 ±.003]

1.02 ±0.08

[.040 ±.003]Dia.

1.50 ±0.08

[.059 ±.003]

(4 Holes)

Dia. 3.44 ±0.08

[.135 ±.003]

6.88 ±0.08

[.271 ±.003]

Recommended PC Board Layouts

20.78 0.38

[.818 .015]

Sq.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Press Fit Vertical Metalized Jack,

PC Board Mount Insulating Bushing

Material—Polypropylene

Part No. 222163-1

Only to be used on Part Nos. 5222006-1

& 5222462-1

Part No. 5222006-1

14.61

[.575]

1.02 ±0.08

[.040 ±.003]Dia.

6.88 ±0.05

[.271 ±.002]

3.43 ±0.05

[.135 ±.002]

6.88 ±0.05

[.271 ±.002]

20.57

[.810]

Max.

11.94 Dia.

[.470] Max.

Recommended PC Board Layout

PC Board Thickness Not Less Than 0.99 [.093]

Dia. 11.94

[.470] Dia.

2.96

[.115] Max.

6.61

[.260] Max.

1.5

[.059 ]

Dia.

4 Holes

+0.08

-0.10

+.003

-.004

Vertical Metalized Jacks,

PC Board Mount

24.00

[.945]

10.72 ± 0.25

[.422 ± .010]

10.70 ± 0.08

[.421 ± .003]

7.50 ± 0.08

[.295 ± .003]

1.00 ± 0.08

[.039 ± .003]

2 Plcs.

1.50 ± 0.08

[.059 ± .003]

2 Plcs.

3.00 ± 0.10

[.118 ± .004]

1.70 ± 0.10

[.067 ± .004]

2.50 ± 0.08

[.098 ± .003]

4 Plcs.

Signal Contact Hole

Switching

Contact

Hole

Part No. 1274314-1

(Switching)

24.00

[.945]

10.72 ± 0.25

[.422 ± .010]

Part No. 1274315-1

Recommended

PC Board Layout

10.70 ± 0.08

[.421 ± .003]

3.75 ± 0.08

[.148 ± .003]

1.00 ± 0.08

[.039 ± .003]

1.50 ± 0.08

[.059 ± .003]

2 Plcs.

3.00 ± 0.10

[.118 ± .004]

1.70 ± 0.10

[.067 ± .004]

2.50 ± 0.08

[.098 ± .003]

3 Plcs.

Recommended

PC Board Layout

Body Contact Dielectric Part

Plating Plating No.

Tin Silver Polyphenylene 6274314-1

Tin Silver Polyphenylene 6274315-1

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Recommended PC Board Layout

6.6 ±0.08

[.260 ±.003]

6.6 ±0.08

[.260 ±.003]

3.3 ±0.08

[.130 ±.003]

1.17 ±0.08

[.046 ±.003]

2.11 ±0.08

[.083 ±.003]

Dia.

(4 holes)

Maximum PC Board Thickness 2.54 [.100]

Dia.

6.15

[.242]

10.97 [.432]

Mounting Height

27.64 ±0.51

[1.088 ±.020]

Right-Angle Metalized Jacks,

PC Board Mount

Body Dielectric Center Part

Plating Contact Length No.

Nickel Polymethyl- 4.34 5413631-1*

pentene .171

Tin

PTFE

4.34 5413631-2*

.171

Nickel Polymethyl- 3.33 5413631-3*

pentene .131

Body Dielectric Contact Part

No.

Nickel TPX Gold 5414373-1

Recommended PC Board Layouts

1.19 ±0.18

[.047 ±.007]Dia.

7.62 ±0.08

[.300 ±.003]

1.78 ±0.08

[.070 ±.003]

Dia.

2 Holes

7.62 ±0.08

[.300 ±.003]

3.81 ±0.08

[.150 ±.003]

8.64

[.340]

21.85

[.860] 25.40

[1.000]

Right-Angle Metalized Jacks,

PC Board/Panel Mount

Body Part

Plating Dielectric No.

Tin

PTFE

5415025-2

Tin TPX 5415025-1

Lockwasher and Jam Nut see page 59.

6.6 ±0.08

[.260 ±.003]

6.6 ±0.08

[.260 ±.003]

3.3 ±0.08

[.130 ±.003]

1.17 ±0.08

[.046 ±.003]

2.11 ±0.08

[.083 ±.003]

4 holes

Dia.

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.64

[.222 ]

+0.08

-0.00

+.003

-.000

Maximum Panel Thickness 6.35 [.250]

Recommended Panel Cutout

1/2-28 Thread

27.64 ± 0.51

[1.088 ±.020]

10.97 ± 0.18

[.432 ±.007]

6.15 ± 0.25

[.242 ±.010]

11.66

[.459]

4.34

[.171]

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

TPX is a trademark of Mitsui Chemicals

America, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Tee Adapter

Covers

Material—Polypropylene, general

purpose

5.08

[.200]

15.11

[.595]

114.55 ±0.76

[4.510 ±.030]

Color

Black

Ivory

Part

No.

221586-1

221586-3

Tee Adapters Style A

(Jack-Plug-Jack) Style B

With Insulated

Cover

(Jack-Plug-Jack)

Insulation Material

Polyphenylene oxide

Style C

(Jack-Jack-Jack)

Body Center Contact Dimensions Comparable Packaging

Style Material Material Dielectric UG/U No. Part No.

and Plating and Plating DE F

Connector Per Pkg.

Brass, BE CU, Gold 32.54 26.19 14.27 Bulk

Nickel (30)2

PTFE

1.281 1.031 .562 274A (100) 221543-2

PH BR, Gold 33.02 27.31 14.50 Bulk

(15)2Acetal 1.300 1.075 .571 —(100) 5413592-2

ABE CU, Gold 33.02 27.31 14.50 Bulk

Zinc, (30)2Acetal 1.300 1.075 .571 —(100) 5413592-6

Nickel PH BR, Gold 33.02 27.31 14.50 Individual

(15)2Acetal 1.300 1.075 .571 —(1) 35413592-9

BE CU, Silver 33.02 27.31 14.50 Individual

(200)2Acetal 1.300 1.075 .571 —(1) 1-5413592-1

BZinc, BE CU, Gold Acetal 32.54 31.12 17.15 1Bulk

Nickel (30)21.281 1.225 .675 —(100) 5413366-21

Brass, BE CU, Silver 32.54 23.37 Bulk

CNickel (200)2

PTFE

1.281 .920 —— (100) 221988-1

Zinc, PH BR, Gold 32.54 23.62 Bulk

Nickel (50)2Acetal 1.281 .930 —— (100) 5414311-1

1Gray insulation cover

2(Microinches min thickness)

3(Special graphics)

Dia.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

35.81

[1.410]

32.54

[1.281]

Right-Angle Adapters

(Jack-Plug)

26.97

[1.062]

Bulkhead Jack-Jack

Adapters

Max.

Recommended Panel Cutout

H= 11/16 across flats, 20.32 [.800] across points.

36.07

[1.420]

15.87

[.625]

22.89

[.901]

Max.

14.53 Dia

[.572] Max.

Isolated Bulkhead Jack-Jack

Adapter

Body Center

Contact Dielectric Part No.

Plating Plating

Nickel Gold Polymethylpentene 5414105-1

Body Center Dimensions

Contact Dielectric Part No.

Plating Plating HL

Nickel Silver 17.45 38.10

PTFE

330024-

.687 1.500

Nickel Gold1 17.78 36.07 Poly- 5228226-1

.700 1.420 ethylene

Nickel Gold2 17.78 36.07 Poly- 5228226-3

.700 1.420 ethylene

Plating:

Gold1 — 0.00127 [.000050] thick Gold2 — 0.00076 [.000015] thick

Note: If an Insulating Bushing is required see part number 330620 and

Panel Cutout on page 54.

Body Center

Contact Dielectric Part No.

Plating Plating

Nickel Silver

PTFE

5329517-1

Nickel Gold

PTFE

5222165-2

Nickel Gold Polymethylpentene 5414666-1

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.06

-0.00

+.003

-.000

Recommended Panel Cutout

H= 11/16 across flats, 20.32 [.800] across points.

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.06

-0.00

+.003

-.000

Jack-Jack Adapters

Style A

Body Center

Contact Dielectric Style Part No.

Plating Plating

Nickel Silver

PTFE

A221551-1

Nickel Gold

PTFE

A221551-3

Nickel Gold Polymethyl- B5414414-1

pentene

Style B

Plug-Plug Adapter

31.8

[1.252] Ref.

Contact Body Part No.

Plating Plating

Gold Nickel 415796-1

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 50 Ohm (Continued)

Jack Covers

101.6

[4.000]

#6 Stud Size

22.10

[.870] 14.53 Dia.

[.572] Max.

Body Plating Part No.

Silver 330022

Nickel 1-330022-2

Max.

14.53 Dia.

[.572] Max. 33.02

[1.300]

#6 Stud Size

Tether

Terminator Plugs

50, 75, 93 Ohm

Plating

Body—Nickel

Center Contact —Gold

Dielectric —Polyethylene

Insulated

Terminators

Insulation Material

Polyphenylene oxide

Long Cover

Short Cover*

38.10

[1.500]

17.40

[.685]

17.40

[.685]

Specification Style No.

Gray Long 5413557-1

1 Watt, 50 Ohm Short 5413364-2

Black Long 5413557-2

* The Short Cover is required when mating the Terminator with a Tee Adapter.

Resistor Part No.

Specification With Tether Without Tether

1 Watt, 50 Ohm 5221629-115221629-4

1 Watt, 75 Ohm 5221629-215221629-5

1 Watt, 93 Ohm — 5221629-6

0.5 Watt, 75 Ohm — —

1 Watt, 50 Ohm 1-5221629-61—

1Tether is conductive with #4 stud size

Max. 38.10

[1.500] Max.

Shorting Caps

Plating

Body—Nickel

Center Contact —Gold

Part No. 413453-1

15.24

[.600]

14.53

[.572]

Dia. Max.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm

Plugs, Crimp

These connectors have been designed

for optimum performance and have a

true 75 ohm impedance the complete

length of the connector. The crimp die

tooling listed below is different from the

equivalent 50 ohm connectors.

Plugs

Interchangeable

Dies for Interchangeable

RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand

Contact Dielectric Style Hand Tool Tool 69710-1 Part No.

Cable Type Plating Plating L 354940-1 or & 626 Pneu.

PRO-CRIMPER Head 318161-1

Adapter 679304-1

179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 5413589-8

179B, 187, 1.160

187A, 161, O Crimp Gold Nickel Polyethelene Commercial 35.56 318451-2 — 5221185-8

BELDEN 9221 1.140

Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 1-5413589-0

AT&T 735A 1.160

O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 1-5221185-8

1.090

Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 5413589-3

BELDEN 8218 1.160

O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 5221185-3

1.090

140, 210, 62, 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-2

62B, 59, 59A, 59B, 1.160

BELDEN 9291, O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 58248-2 5221185-2

9209, 9269 1.090

302, BELDEN 89269,

88241, Hi-Temp 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-1

Times PL-62, Berk Tek 1.160

BTDC-59, BTDC-62

BELDEN 8212, 9104, 29.46

9112, 9167, 9240, 9259, Hex Crimp Gold Nickel Polyethelene Commercial 1.160 58425-1 — 5413589-9

9266, Times FM-59,

(RG 59 Type 27.69

with 20 AWG C.C.) O Crimp Gold Nickel Polyethelene Commercial 1.090 58536-1 58248-2 5221185-9

Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-7

BELDEN 9145, 1.160

AT&T 734A O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 — 1-5221185-0

1.090

BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 25.65 58536-1 — 5221185-1

9114 1.010

6, 6A O Crimp Gold Nickel Polyethelene Commercial 37.85 58538-1 58248-1 5221185-7

1.490

BELDEN 8281, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-3 —5413589-5

9141, 9231, 1.160

Western

Electric 724, O Crimp Gold Nickel Polyethelene Commercial 28.45 58538-1 58248-1 5221185-5

728, 3049 1.120

COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 — 2-5221185-9

S59 Hec 1.140

COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 — 3-5221185-1

F59 Hec-z 1.140

Max.

14.53

[.572]

Dia. Max.

Hex and O Crimp

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

AT&T is a trademark of AT&T Corporation.

BELDEN is a trademark of Belden Wire

and Cable Company.

COMM/SCOPE is a trademark of

Commscope, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

Plugs for JIS Cables, Crimp

Plating

Body—Nickel

Center Contact —Gold

Bulkhead Jacks for JIS

Cables, Crimp

Plating

Body—Nickel

Center Contact —Gold

Dielectric —Polymethylpentene

14.53

[.572]

Dia. Max.

Max.

Interchangeable Dies

for PRO-CRIMPER

Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor

PRO-CRIMPER

Adapter 679304-1

3C-2V Hex Crimp Polymethylpentene 29.46 58425-1 1-5413589-1

1.160

2.5C-2V Hex Crimp Polymethylpentene 29.46 58425-2 1-5413589-6

1.160

Interchangeable Dies

for PRO-CRIMPER

Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor

PRO-CRIMPER

Adapter 679304-1

1.5C-2V Hex Crimp 75Ω36.83 58425-2 5413590-4*

1.450

*Packaged in 100 pieces per bag.

20.32

[.800]

Max.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

14.53 Dia.

[.572] Max.

Max.

27.18

[1.070]

Hex and O Crimp

Max.

Interchangeable

Dies for Interchangeable

RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand

Contact Dielectric Style Hand Tool Tool 69710-1 Part No.

Cable Type Plating Plating L 354940-1 or & 626 Pneu.

PRO-CRIMPER Head 318161-1

Adapter 679304-1

179, 179A,

179B, 187, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — -5413588-8

187A, 161 pentene 1.553

BELDEN 9221

AT&T 735A Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — 1-5413588-0

pentene 1.553

AT&T KS

19224 L2, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — 5413588-4

RD179 pentene 1.553

Double Braid

140, 210, 62, Hex Crimp Gold Nickel Polymethyl- Commercial 139.45 58425-1 —5413588-2

62A, 62B, 59, pentene 1.553

59A, 59B,

BELDEN 9291, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 58248-2 -5221402-2

9209, 9269 pentene 1.570

BELDEN 8212,

9104, 9112,

9240, 9167,

9259, 9266, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-1 — 5413588-9

Times FM-59, pentene 1.553

(RG 59 Type

with 20

AWG C.C.)

BELDEN 9145, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 — 5221402-4

AT&T 734A pentene 1.570

Right-Angle Plugs, Crimp

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

AT&T is a trademark of AT&T Corporation.

BELDEN is a trademark of Belden Wire

and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

Interchangeable

Dies for Interchangeable

RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand

Contact Dielectric Style Hand Tool Tool 69710-1 Part No.

Cable Type Plating Plating L 354940-1 or & 626 Pneu.

PRO-CRIMPER Head 318161-1

Adapter 679304-1

179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 — 5413760-8

179B, 161, 1.300

187, 187A, O Crimp Gold Nickel Polyethelene Commercial 30.48 318451-2 — 5221199-5

BELDEN 9221 1.200

BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 — 5413760-3

1.300

140, 210, 62,

62A, 62B, 59,

59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 58248-2 5221199-2

BELDEN 9291, 1.200

9209, 9269

302, BELDEN 88241,

89269, Hi-Temp

62A, Times Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 — 5413760-1

PL-62, Berk 1.300

Tek BTDC-59,

BTDC-62

BELDEN 8212,

9104, 9112,

9240, 9167,

9259, 9266, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 — 5413760-9

Times FM-59, 1.300

(RG 59 Type

with 20

AWG C.C.)

BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 — 5221199-1

9114 1.200

Jacks, Crimp

Max.

Hex and O Crimp

11.08 Dia.

[.436] Max.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

BELDEN is a trademark of Belden Wire

and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

20.32

[.800]

Max.

34.93

[1.375]

Hex and O Crimp

Max.

12.83

[.505 ]

+0.13

-0.20

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

Interchangeable

Dies for Interchangeable

RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand

Contact Dielectric Style Hand Tool Tool 69710-1 Part No.

Cable Type Plating Plating L 354940-1 or & 626 Pneu.

PRO-CRIMPER Head 318161-1

Adapter 679304-1

179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-8

179B, 161, 1.450

187, 187A, O Crimp Gold Nickel Polyethelene Commercial 34.93 318451-2 — 5221221-5

BELDEN 9221 1.375

AT&T KS

19224 L2, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-4

RD179 1.450

Double Braid

Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-3

BELDEN 8218 1.450

140, 210, 62,

62A, 62B, 59,

59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-2

BELDEN 9291, 1.375

9209, 9269

BELDEN 8212,

9104, 9112, 9240,

9167, 9259, 9266, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-7

Times FM-59 1.375

(RG 59 Type with

20 AWG C.C.)

BELDEN 9114, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 — 5221221-1

9248 1.375

Bulkhead Jacks, Crimp

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

AT&T is a trademark of AT&T Corporation.

BELDEN is a trademark of Belden Wire

and Cable Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

Bulkhead Solder Jacks

Front Mount

Plating

Body—Nickel

Center Contact —Silver

27.43

[1.083]

13.09 Dia.

[.515] Max.

Maximum Panel Thickness 3.18 [.125]

Recommended Panel Cutout

9.75/9.65

[.384./380]

Dia.

4.04/3.96

[.159/.156]

Part No. 5221244-1

(with Solder Terminal)

Bulkhead Solder Jack

Rear Mount

Lockwasher and Jam Nut see page 73.

Plating

Body—Nickel

Center Contact —Gold

Dielectric

—

Polymethylpentene

Bulkhead Jack

PC Board Mount

Accepts

.054 Dia.

Max. Wire

Part No. 5415187-1

(without Solder Terminal)

3/8-32 Thread

Part No. 5414217-1

17.78 Dia.

[.700] Max.

31.75

[1.250]

1/2-28 Thread

Accepts .

.050 Dia.

Max. WIre

Max.

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Maximum Panel Thickness 6.35 [.250]

Recommended Panel Cutout

13.09

[.515]

Dia.

Max.

27.43

[1.083] Max.

Accepts

.054 Dia.

Max. Wire

3/8-32 Thread

20.8

[.820]

11.07

[.436] Max.

3.30

[.130]

Ø 12.70 ± 0.1

[.500 ± .004]

11.2 ± 0.1

[.441 ± .004]

Part No. 6274086-1

Note: If insulating bushing required

use part no. 227223-1 or 221951-1

(for details, reference page 55).

Note: If insulating bushing required

use part no. 227223-1 or 221951-1

(for details, reference page 55).

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

Body Center Dimensions Part No.

Contact Without With

Material Plating ABCL

Mounting Posts Mounting Posts

VALOX, Black w/ 6.17 21.21 11.68 2.79 *

Compliant Posts Gold3 .243 .835 .460 .110 —5415105-2

(Economy)*

VALOX, 6.17 21.21 11.68 4.01 *

Black Gold3 .243 .835 .460 .158 —5415105-1

(Economy)*

VALOX, Gold1 6.91 21.21 13.88 3.48 —5413194-1

White .272 .835 .519 .137

VALOX, 6.91 21.21 13.88 3.48 *

White Gold1 .272 .835 .519 .137 —5415634-2

(Economy)*

VALOX, Gold1 6.91 21.21 13.88 3.48 —5413194-2

Black .272 .835 .519 .137

Gold1 6.91 21.21 13.88 3.48 —5415634-1

VALOX, .272 .835 .519 .137

Black

Gold1 8.59 21.21 15.88 3.48 —5415633-1

(Economy)* .338 .835 .625 .137

VALOX, Gold2 8.59 21.21 15.88 3.48 —5414459-1

White .338 .835 .625 .137

Metal Gold1 8.25 20.83 15.88 2.16 —5222092-1

.325 .820 .625 .085

Metal Gold1 8.25 20.83 15.88 —5222093-1 —

.325 .820 .625

Metal Gold1 8.25 20.83 15.88 3.48 —5414409-1

(Economy)* .325 .820 .625 .137

Metal with Gold1 6.91 20.83 12.70 3.48 —5415417-1

Compliant .272 .820 .500 .137

Posts Tin 8.56 21.21 15.88 3.48 —5415419-1

(Economy)* .337 .835 .625 .137

Metal Gold1 8.25 20.83 15.88 3.48 —5222092-3

.325 .820 .625 .137

Metal Gold1 6.91 20.83 12.70 3.48 —5414907-1

.272 .820 .500 .137

Metal Gold1 6.91 20.83 12.70 —6274072-1 —

.272 .820 .500

Metal Gold1 6.91 20.83 12.70 3.48 —6274084-1

(Economy)* .272 .820 .500 .137

**Economy connector uses 50 Ωpart with smaller dielectric and stamped and formed con-

tact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω,

screw machined Beryllium Copper).

Plating:

Gold1 — 0.00076 [.000030] thick

Gold2 — 0.00127 [.000050] thick

Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on

page 54.

Recommended PC Board Layouts

Right-Angle Jacks

PC Board/Panel Mount

Outer Shell —Nickel

Dielectric —Polymethylpentene

Lockwasher and Jam Nut see page 73.

AB34.93

[1.375]

Mtg. Hgt.

1/2-28 Threads 1/2-28 Threads

VALOX Body

AB34.93

[1.375]

Metal Body

Mtg. Hgt.

* Screw for panel thickness of 2.38

[3/32] or greater

* Part No. 221108-2.

* Screw for panel thickness of less

than 2.38 [3/32]

* Part No. 221108-4.

Without Mounting Posts

With Mounting Posts

(Top View)

10.16 ±0.08

[.400 ±.003]

5.08 ±0.05

[.200 ±.002]

2.54 ±0.05

[.100 ±.002]

GS 0.89 ±0.08

[.035 ±.003]

2.64 [.104] Dia.

Clearance Hole for

2-56 Self-Tapping Screw*

(2 Holes)

5.08 ±0.05

[.200 ±.002]

2.01 ±0.08

[.079 ±.003]

(2 Holes)

Mating

Face

(Top View)

10.16 ±0.08

[.400 ±.003]

5.08 ±0.05

[.200 ±.002]

2.54 ±0.05

[.100 ±.002]

GS 0.89 ±0.08

[.035 ±.003]

5.08 ±0.05

[.200 ±.002]Mating

Face

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.13

-0.00

+.005

-.000

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

Vertical Jacks

PC Board/Panel Mount

Plating

Outer Shell —Nickel

Dielectric —Polymethylpentene

VALOX Body Metal Body

Recommended PC Board Layout

B34.93

[1.375]

Mtg. Hgt.

15.88

[.625]

1/2-28 Thread

B34.93

[1.375]

Mtg. Hgt.

15.88

[.625]

1/2-28 Thread

Body Contact Dim. Dim. Part No.

Material Plating B L

VALOX,

Black Gold1 21.21 3.48 5415632-1

(Economy)* .835 .137

VALOX,

White Gold1 21.21 3.48 5415632-2

(Economy)* .835 .137

Metal Gold1 20.83 3.48 5222132-1

.820 .137

Metal Tin 21.21 3.48 5415520-1

(Economy)* .835 .137

*Economy connector uses 50 Ωpart with smaller dielectric and stamped and

formed contact, Phosphor Bronze contact material (Compare to regular

connector which is 75 Ω, screw machined Beryllium Copper).

Plating:

Gold1 — 0.00076 [.000030] thick

Note: If an Insulating Bushing is required see part number 330620 and

Panel Cutout on page 54.

Lockwasher and Jam Nut

Part No.

1-329632-2 Part No.

1-329631-2

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.13

-0.00

+.005

-.000

5.08 ±0.05

[.200 ±.002]

5.08 ±0.05

[.200 ±.002]

2.54 ±0.05

[.100 ±.002]

0.89 ±0.08

[.035 ±.003]

2.01 ±0.08

[.079 ±.003]

(2 Holes)

(Top View)

10.16 ±0.08

[.400 ±.003]

10.16 ±0.08

[.400 ±.003]

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

* Screw for panel thickness of 2.38

[3/32] or greater

* Part No. 221108-2.

* Screw for panel thickness of less

than 2.38 [3/32]

* Part No. 221108-4.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

Vertical Metalized Jacks

PC Board Mount

Plating

Dielectric — PTFE

A Max.

11.49

[.470]

Dia.

Max.

Recommended PC Board Layout

Style A Style B Style C

Body Center Leg

Contact Style Length Part No.

Plating Plating L

Nickel Gold B 3.30 6274291-2

.130

Tin Gold B 3.30 6274291-1

.130

Tin Gold B 6.35 6274359-1

.250

Tin Gold C 4.44 5414394-1

.175

Nickel Silver A 6.35 5413986-1

.250

Tin Gold F 2.54 6274360-1

.100

6.88 ±0.05

[.271 ±.002]

6.88 ±0.1

[.271 +.003]

–.004 1.5 ±0.1

[.059 +.004]

–.003

3.43 ±0.05

[.135 ±.002]

Recommended PC Board Layout

17.45

[.687]

15.88

[.625]

Press Fit

Vertical Metalized Jacks

PC Board Mount

Dim. Part

ANo.

20.57 5222462-1

.810

16.26 5414088-1

.640

20.57

[.810]

Drill Holes for

0.94 ±0.05 [.037 ±.002 ]

Dia. Pin (5 Places)

6.35 ±0.05

[.250 ±.002]

12.7 ±0.08

[.500 ±.003]

6.35 ±0.05

[.250 ±.002]

12.7 ±0.08

[.500 ±.003]

6.88 ±0.05

[.271 ±.003]

6.88 ±0.08

[.271 ±.003]

3.43 ±0.05

[.135 ±.002]

3.44 ±0.08

[.135 ±.003]

3.43 ±0.08

[.135 ±.003]

6.88 ±0.05

[.271 ±.003]

6.88 ±0.08

[.271 ±.003]

2.44 ±0.08

[.096 ±.003]

(4 Holes)

Dia.

1.32 ±0.08

[.052 ±.003]Dia.

(4 Plated-Thru

Holes)

Dia.

1.02 ±0.08

[.040 ±.003]

(Plated-Thru Hole)

Dia.

Insulating Bushing

Material—Nylon

Part No. 222163-1

Only to be used on Part Nos.

5222462-1 and 5222006-1

16.64

[.655]

Sq.

1.50 ±0.08

[.059 ±.003]

(4 Holes)

Dia.

1.02 ±0.08

[.040 ±.003]Dia.

2.96

[.115] Max.

6.61

[.260] Max.

14.61

[.575] Dia.

11.94

[.470]

Dia.

1.02 ± 0.08

[.040 ± .003]

5.16 ± 0.08

[.203 ± .003]

5.16 ± 0.08

[.203 ± .003]

2.578 ± 0.076

[.1015 ± .0030]

Dia.

2.06 ± 0.05

[.081 ± .002]

Dia.

4 Plcs.

2.54

[.100]

14.73

[.580]

5 Plcs.

Style F (Push-On)

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

3.81 ± 0.08

[.150 ± .003]1.19 ± 0.18

[.047 ± .007]

1.78 ± 0.08

[.070 ± .003]

7.62 ± 0.08

[.300 ± .003]

7.62 ± 0.08

[.300 ± .003]

Dia.

25.40 ± 0.38

[1.000 ± .015]

11.43 ± 0.43

[.450 ± .017]

21.84

[.860]

17.78

[.700]

11.07

[.436] Max.

Part No. 6274127-1

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

Recommended PC Board Layout

6.6 ±0.08

[.260 ±.003]

6.6 ±0.08

[.260 ±.003]

3.3 ±0.08

[.130 ±.003]

1.17 ±0.08

[.046 ±.003]

2.11 ±0.08

[.083 ±.003]

Dia.

(4 holes)

Maximum PC Board Thickness 2.54 [.100]

Dia.

Press Fit, Bulkhead

Vertical Metalized Jack

includes hardware

28.78

[1.133]

4.37 ± 0.51

[.172 ± .020]

5 Plcs.

24.41

[.961]

10.80

[.425]

+ 0.08

– 0.00

+ .003]

– .000

5.54

[.218

+ 0.13

– 0.00

+ .005]

– .000

ø 12.83

[ø .505

Part No. 6274124-2

Recommended

PC Board Layout

L6.15

[.242]

10.97

[.432]

Mounting

Height

28.4

[1.118] Max.

17.48

[.688] Sq.

15.88

[.625] Max.

1.7 ±0.05

[.067 ±.002]

(2 Places)

For Drive Screw 6.35 ±0.05

[.250 ±.002]

6.35 ±0.05

[.250 ±.002]

12.7 ±0.05

[.500 ±.002]

12.7 ±0.05

[.500 ±.002]

1.02 ±0.08

[.040 ±.003]

(Plated-Thru

Hole 3 Places)

Press Fit

Vertical Metalized Jacks

PC Board Mount

(Continued)

PC Board Thickness (Min.) Part No.

2.36 5221336-3

.093

3.17 5221336-4

.125

Recommended PC Board Layout

Body Contact Center Part No.

Plating Dielectric Plating Contact

Dimension

Nickel TPX Gold2 .171 [.007] 5413558-1

Tin

PTFE

Gold2 .171 [.007] 5413558-2

Nickel TPX Gold2 .131 [.005] 5413558-3

Nickel TPX Gold1 .171 [.007] 5413558-5

Gold1 — 0.00076 [.000030] thick

Gold2 — 0.00127 [.000050] thick

Dia.

Right-Angle Metalized Jacks

PC Board Mount

Ø 1.02 ± 0.08

[.040 ± .003]

3.43

[.135]

6.88

[.271]

3.43

[.135]

6.88

[.271]

Holes Plated

Through 5 Plcs.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

TPX is a trademark of Mitsui Chemicals

America, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

36.07

[1.420] Max.

Ø 15.88 ± 0.25

[.625 ± .010]

BNC Connectors, 75 Ohm (Continued)

Right-Angle Metalized

Jacks

PC Board/Panel Mount

Maximum Panel Thickness 6.35 [.250]

Recommended Panel Cutout

12.83+0.13

-0.00

[.505+.005]

-.000

Dia.

5.64+0.08

-0.00

[.222+.003]

-.000

12.83+0.13

-0.00

[.505+.005]

-.000

Dia.

5.54+0.08

-0.00

[.218+.003]

-.000

Part No. 5222117-1

36.07

[1.420]

11/16

Right-Angle Adapter

(Jack-Plug)

Plating

Body —Nickel

Center Contact —Gold

Dielectric —

Polymethylpentene

22.89

[.901]

Max.

14.53

[.572]

26.97

[1.062]

Part No. 5415020-1

Maximum Panel Thickness 6.35 [.250]

Recommended Panel Cutout

12.83+0.13

-0.00

[.505+.005]

-.000

Dia.

5.54+0.08

-0.00

[.218+.003]

-.000

Recommended

Panel Cutout

Dia.

Max.

Bulkhead Jack-Jack

Adapter

Plating

Body —Nickel

Center Contact —Gold

Dielectric —Polymethylpentene

Part No. 1274935-1

Jack-Jack Adapter

Plating

Body — Nickel

Center Contact — Gold

Dielectric — Polymethylpentene

Bulkhead Jack-Jack

Adapter

Plating

Body — Nickel

Center Contact — Gold

Dielectric — Polymethylpentene

Body

Plating Dielectric Part No.

Tin

PTFE

6274425-2

1/2-28 Thread

27.64 ± 0.51

[1.088 ±.020]

10.97 ± 0.18

[.432 ±.007]

6.15 ± 0.25

[.242 ±.010]

11.66

[.459]

4.34

[.171]

36.04

[1.419] Max.

Part No. 415567-1

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

BNC Connectors, 75 Ohm (Continued)

8.89 ± 0.13

[.350 ± .005]

+ 0.13

– 0.00

+ .005

– .000

Ø 9.65

[.380 ]

Recommended Panel Cutout

Bulkhead Jack-Push On Plug

Adapter

41.92

[1.650]

Ø 14.35

[.565] Max.

Ø 8.43

[.332] Max.

Part No. 1274007-1

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.