AC Current Probe Model MN313 The Model MN313 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN313 meets EN 61010, 600V, Cat. III safety standards and is CE Marked and UL approved for Canada and United States. The Model MN313 has a 0.78" (20mm) jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. The Model MN313 is a high performance model and uses a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The model MN313 is an excellent probe to be used in power and low level current measurement applications. Features Applications *Small, compact size *Measuring in breaker panels *Measurement range of 0.1 to 200A * Industrial loads *Large jaw opening accommodates conductors up to 250MCM * Residential and commercial sites *Designed for DMMs, loggers, recorders and oscilloscopes * HVAC * Data logging/recording *40Hz to 10kHz response *1mAac/Aac output signals *Designed to EN 61010, 600V Cat. III safety standard * U L approved for Canada and United States * Double Insulation *CE Mark MN313_211625 (pdf) 0408 Rev.04 Technical Assistance (800) 343-1391 www.aemc.com 1 of 4 Specifications Model MN313* Electrical Nominal Range Measurement Range Transformation Ratio Output Signal Accuracy (200A Range) 0.1 to 1A 1 to 80A 80 to 100A 100 to 150A 150 to 200A Phase Shift (200A Range) 0.1 to 1A 1 to 20A 20 to 80A 80 to 150A Overload Frequency Range Limit Operating Conditions Crest Factor Working/Common Mode Voltage Output Termination Mechanical Operating Temperature Storage Temperature Operating Relative Humidity Jaw Opening Maximum Conductor Size Dimensions Weight Polycarbonate Material Safety Electrical ULApproval Double Insulation CE Mark 200A 0.1 to 200A 1000:1 1mA/A (100mA @ 100Aac) 2% of Reading 0.02mA 1% of Reading 0.02mA 2% of Reading 0.1mA 2.5% of Reading 0.5mA Not Specified Not Specified 3.0 2.0 2.5 240A for 10 min ON, 30 min OFF 40 to 10kHz 200A permanently to 3kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz 3 @ 200A Peak with an error (due to CF) of 3% 600Vrms 5 ft Lead 14 to 131F (-10 to 55C) -40 to 158F (-40 to 70C) 10 to 35C 85% RH (without roll-off above 35C) 0.83" (21mm) 0.78" (20mm) 5.47 x 2.00 x 1.18" (139 x 51 x 30mm) 6.5 oz (180g) Polycarbonate with fiberglass charge, UL94 V0 EN 61010-2-32 Yes - Canada and United States Yes Yes Note: Reference conditions: 20 to 26C, 20 to 75% RH, external magnetic field <40A/m, 48 to 65Hz sine wave, distortion factor less than 1%, no DC component, no external current carrying conductor, test sample centered. Load impedance >1 *Diode protection for open secondary (output) MN313_211625 (pdf) 0408 Rev.04 Technical Assistance (800) 343-1391 www.aemc.com 2 of 4 .73" (18.5mm) 2.56" (65mm) .83" (21mm) O=0.786" (20mm) Cable max. 0.79 x 0.20" (20 x 5mm) Dual Bus Bar max. 5.47" (139mm) 2.00" (51mm) Black Red 1.18" (30mm) Leads: Double/reinforced 5 ft (1.5m) lead with safety 4mm banana plug ORDERING INFORMATION CATALOG NO. AC Current Probe Model MN313 (Lead - 1mA/A - 150A max). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2116.25 Includes a user manual Accessories (Optional) Banana plug Adaptor (Safety Leads to nonrecessed plug) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #1017.45 Banana (Female) - BNC (Male) Adaptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2118.46 MN313_211625 (pdf) 0408 Rev.04 Technical Assistance (800) 343-1391 www.aemc.com 3 of 4 Contact Us United States & Canada: Chauvin Arnoux(R), Inc. d.b.a. AEMC (R) Instruments 200 Foxborough Blvd. Foxborough, MA 02035 USA (508) 698-2115 * Fax (508) 698-2118 www.aemc.com Customer Support - for placing an order, obtaining price & delivery: customerservice@aemc.com Sales Department - for general sales information: sales@aemc.com Repair and Calibration Service - for information on repair & calibration, obtaining a user manual: repair@aemc.com Technical and Product Application Support - for technical and application support: techinfo@aemc.com Webmaster - for information regarding www.aemc.com: webmaster@aemc.com South America, Central America, Mexico, Caribbean, Australia & New Zealand: Chauvin Arnoux(R), Inc. d.b.a. AEMC (R) Instruments 15 Faraday Drive Dover, NH 03820 USA (978) 526-7667 * Fax (978) 526-7605 export@aemc.com www.aemc.com All other countries: Chauvin Arnoux(R) SCA 190, rue Championnet 75876 Paris Cedex 18, France 33 1 44 85 45 28 * Fax 33 1 46 27 73 89 info@chauvin-arnoux.com www.chauvin-arnoux.com MN313_211625 (pdf) 0408 Rev.04 Technical Assistance (800) 343-1391 www.aemc.com 4 of 4