EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide One Technology Way * P.O. Box 9106 * Norwood, MA 02062-9106, U.S.A. * Tel: 781.329.4700 * Fax: 781.461.3113 * www.analog.com Evaluating the AD7616/AD7616-P 16-Channel DAS with 16-Bit, Bipolar Input, Dual Simultaneous Sampling ADC FEATURES GENERAL DESCRIPTION Full featured evaluation board for the AD7616 and AD7616-P On-board power supplies Standalone capability SDP-B controller board-compatible PC software for control and data analysis The EVAL-AD7616SDZ/EVAL-AD7616-PSDZ is a single, full featured evaluation board designed to easily evaluate all features of both the AD7616 and AD7616-P analog-to-digital converters (ADCs). The evaluation board can be controlled by the EVALSDP-CB1Z via the 120-way high speed system demonstration platform (SDP-B) connector (J10). The EVAL-SDP-CB1Z SDP-B board controls the evaluation board through a USB port of a PC using the evaluation board software, which is available for download from the AD7616 and AD7616-P product pages. EVALUATION KIT CONTENTS EVAL-AD7616SDZ/EVAL-AD7616-PSDZ evaluation board DC power supply ADDITIONAL EQUIPMENT NEEDED Complete specifications for the AD7616 and AD7616-P devices are provided in the AD7616 and AD7616-P data sheets and should be consulted in conjunction with this user guide when using the evaluation boards. Full details on the EVAL-SDP-CB1Z are available on the SDP-B product page. EVAL-SDP-CB1Z; includes a USB cable Signal source PC running Windows XP SP3, Windows Vista, or Windows 7 with a USB 2.0 port Table 1. EVAL-AD7616SDZ/EVAL-AD7616-PSDZ On-Board Components ONLINE RESOURCES AD7616 and AD7616-P data sheets EVAL-AD7616SDZ/EVAL-AD7616-PSDZ user guide AD7616 evaluation software Component ADP7118 ADP7104ARDZ-5.0 ADR421 Description Low noise, low dropout regulator (LDO) 5 V low noise LDO Ultraprecision, low noise, 2.5 V XFET(R) voltage reference TYPICAL SETUP OF THE EVAL-AD7616SDZ/EVAL-AD7616-PSDZ WALL OUTLET 100V AC TO 240V AC 47Hz TO 63Hz SWITCHING POWER SUPPLY SIGNAL GENERATOR ANALOG FILTER 14723-001 PC RUNNING EVALUALTION BOARD SOFTWARE Figure 1. Typical Setup of the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ (Left) and the EVAL-SDP-CB1Z (Right) PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. A | Page 1 of 18 UG-1012 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Sockets/Connectors ......................................................................6 Evaluation Kit Contents ................................................................... 1 Test Points ......................................................................................6 Additional Equipment Needed ....................................................... 1 Evaluation Board Software ...............................................................7 Online Resources .............................................................................. 1 Software Installation Procedures.................................................7 General Description ......................................................................... 1 Evaluation Board Setup Procedures ...........................................9 Typical Setup of the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ1 AD7616 Evaluation Software Operation ..................................... 10 Revision History ............................................................................... 2 Launching the Software ............................................................. 10 Quick Start Guide ............................................................................. 3 Setting Up the System for Data Capture ................................. 10 Evaluation Board Hardware ............................................................ 4 Description of Main Window ................................................... 10 AD7616/AD7616-P Description ................................................ 4 Waveform Analysis .................................................................... 13 Power Supplies .............................................................................. 4 Analysis Tab ................................................................................ 15 Input Signals .................................................................................. 4 Register Map Tab ........................................................................ 17 Link Configuration Options ....................................................... 5 Exiting the Software ................................................................... 17 Evaluation Board Circuitry ............................................................. 6 REVISION HISTORY 6/2017--Rev. 0 to Rev. A Added AD7616-P and EVAL-AD7616-PSDZ ........... Throughout Changes to AD7616 Description Section ...................................... 4 Changes to Setup Conditions Section............................................ 5 Changes to Table 3 ............................................................................ 5 10/2016--Revision 0: Initial Version Rev. A | Page 2 of 18 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide UG-1012 QUICK START GUIDE a. Follow these steps to evaluate the AD7616 and AD7616-P ADC: 2. 3. 4. 5. Download and install the AD7616 evaluation software, available on the AD7616 and AD7616-P product pages; note that the AD7616 software is used for both devices. Ensure the EVAL-SDP-CB1Z board is disconnected from the USB port of the PC during software installation. The PC may need to be restarted after the installation. Ensure the various link options are configured as outlined in Table 3. Connect the EVAL-SDP-CB1Z board to the evaluation board, shown in Figure 2. Connect the EVAL-SDP-CB1Z board to the PC via the USB cable. 6. 7. 8. 14723-002 1. For Windows(R) XP, search for the EVAL-SDP-CB1Z drivers. b. Choose to automatically search for the drivers for the EVAL-SDP-CB1Z board if prompted by the operating system. Power up the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ evaluation board by inserting the 7 V to 9 V dc barrel jack, included in the evaluation kit, into the 7 V to 9 V barrel connector, labeled J7. Launch the AD7616 evaluation software from the Analog Devices subfolder in the All Programs menu. Connect an input signal via the V0A connector. Figure 2. EVAL-AD7616SDZ/EVAL-AD7616-PSDZ Evaluation Board (Left) Connected to the EVAL-SDP-CB1Z Board (Right) Rev. A | Page 3 of 18 UG-1012 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide EVALUATION BOARD HARDWARE The AD7616/AD7616-P is ideally suited to applications such as power-line monitoring, multiphase motor control, instrumentation and control systems, and data acquisition systems (DAS). AD7616/AD7616-P DESCRIPTION This user guide describes the evaluation board for the AD7616/ AD7616-P dual, simultaneous sampling ADCs. The AD7616/ AD7616-P are 16-channel, 16-bit, bipolar input ADCs with independently selectable channel input ranges. The AD7616/ AD7616-P operates from a single 5 V analog power supply with a 2.3 V to 3.6 V VDRIVE. The device features analog input clamp protection, a high impedance analog input, a first-order antialiasing filter, and an on-chip accurate reference. POWER SUPPLIES Take care before applying power and signals to the EVALAD7616SDZ/EVAL-AD7616-PSDZ evaluation board to ensure that all link positions are set according to the required operating mode. See Table 3 for the complete list of link options. The EVAL-AD7616SDZ/EVAL-AD7616-PSDZ evaluation board is supplied by an included 7 V to 9 V power supply; alternatively, separate VDRIVE and VCC supplies can be supplied to the AD7616 (or AD7616-P) via the J8 and J9 connectors, respectively. The AD7616/AD7616-P can achieve throughput rates up to 1 MSPS per channel pair with 90.5 dB signal-to-noise ratio (SNR). The AD7616/AD7616-P features oversampling capability with a digital filter that can achieve 92 dB SNR for an oversampling ratio of 2. The device also features a flexible channel sequencer with burst mode. INPUT SIGNALS The analog input range to the AD7616/AD7616-P is independently selectable with an absolute maximum input voltage range of 16.5 V, which must not be exceeded. An input signal in the range of 2.5 V, 5 V, or 10 V must be connected to the evaluation board via any of the analog input connecters. The AD7616 has a flexible parallel/serial interface that is SPI-/ QSPI-/MICROWIRETM-/DSP-compatible whereas the AD7616-P has a parallel interface only. It also features optional cyclical redundancy check (CRC). The AD7616/AD7616-P comes in an 80-lead LQFP package. Table 2. Optional External Power Supplies Connector J8 J9 Voltage Range 5 V 10% 2.3 V to 3.6 V Description Analog supply rail Digital supply rail without EVAL-SDP-CB1Z connected + ON-BOARD POWER SUPPLIES ADP7118 5V AVDD VCC GND - ADP7104 SDP 5V PWR GOOD VIN 7V TO 9V DC INPUT JACK ADP7118 3.3V VDRIVE VDRIVE 5V GND BIPOLAR INPUT SIGNALS x8 VCC BF527 DSP REFSEL VDRIVE V0A....V7A PARALLEL INTERFACE PARALLEL INTERFACE AD7616 BIPOLAR INPUT SIGNALS x8 CONTROL INPUTS CONTROL INPUTS V0B....V7B RESET REFINOUT GND EVAL-SDP-CB1Z CONTROLLER BOARD ADR421 2.5V REF Figure 3. EVAL-AD7616SDZ/EVAL-AD7616-PSDZ Functional Block Diagram Rev. A | Page 4 of 18 14723-013 Power Supply VCC VDRIVE EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide LINK CONFIGURATION OPTIONS There are multiple link options that must be set correctly to select the appropriate operating setup before using the EVALAD7616SDZ/EVAL-AD7616-PSDZ. The functions of these options are outlined in Table 3. Setup Conditions Take care before applying power and signals to the EVALAD7616SDZ/EVAL-AD7616-PSDZ to ensure that all link positions are set as required by the selected operating mode. UG-1012 There are two modes to operate the EVAL-AD7616SDZ/EVALAD7616-PSDZ evaluation board. SDP-B controlled mode used with the EVAL-SDP-CB1Z board or standalone mode. Table 3 shows the default positions of the links when the EVALAD7616SDZ/EVAL-AD7616-PSDZ is packaged. It is set up to operate in conjunction with the SDP-B via the parallel interface with the power supplied from the VIN 7 V to 9 V barrel connector, J7. Table 3. Link Options Link LK38 Default Position B LK39 Inserted LK40 B LK41 B LK1 to LK16 Inserted LK17 to LK32 Removed Channel Selection LK33 to LK35 C Hardware/ Software Mode Range Select LK36 to LK37 C Category Power Supplies Analog Input Function This link selects the reference source for the AD7616/AD7616-P. Position A--internal reference selected. Position B--external reference selected. When LK39 is inserted, REFINOUT is connected to the ADR421 external reference. When LK39 is removed, REFINOUT is disconnected from the ADR421 and an external reference can be supplied via the SMA connector, J6. This link selects the VCC supply source for the AD7616/AD7616-P. Position A--VCC supply is sourced from the terminal connector, J9. Position B--VCC supply is derived from the VIN 7 V to 9 V connector, J7. This link selects the VDRIVE supply source for the AD7616/AD7616-P. Position A--VDRIVE supply is sourced from the terminal connector, J8. Position B--VDRIVE supply is derived from the VIN 7 V to 9 V connector, J7. When these links are inserted, the VxxGND pin for each channel is connected to the board ground. Remove these links if the VxxGND pin for a channel is to be sensed from the signal source. When these links are inserted, the analog inputs are connected to the respective VxxGND through a 270 resistor. Remove the respective link if an analog input is applied to a channel. In Hardware Mode, these links select the input channels for next conversion for the ADC A channels and the ADC B channels. In software mode, these pins must connect to AGND, Position C. Position A--The CHSELx pins are controlled via the SDP interface. Position B--CHSELx pins are connected to VDRIVE. Position C--CHSELx pins are connected to AGND. These pins are dual-purpose. With the HW_RNGSELx pins tied to ground, the AD7616/AD7616-P operates in Software mode. In hardware mode, these links select the analog input range. Refer to the AD7616/AD7616-P data sheet for detailed range selection instructions. Position A--The HW_RNGSELx pins are controlled via the SDP interface. Position B--HW_RNGSELx pins are connected to VDRIVE. Position C--HW_RNGSELx pins are connected to AGND. Rev. A | Page 5 of 18 UG-1012 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide EVALUATION BOARD CIRCUITRY SOCKETS/CONNECTORS TEST POINTS The connectors and sockets on the EVAL-AD7616SDZ/EVALAD7616-PSDZ are described in Table 4. There are several test points and SIL headers on the EVALAD7616SDZ/EVAL-AD7616-PSDZ. These test points provide easy access to the signals from the evaluation board for probing, evaluation, and debugging. The default interface to this evaluation board is via the 120-way connector, which connects the EVAL-AD7616SDZ/EVALAD7616-PSDZ to the EVAL-SDP-CB1Z. If using the EVALAD7616SDZ/EVAL-AD7616-PSDZ evaluation board in standalone mode, communication is achieved via the J5 singleinline (SIL) header pins. Table 4. On-Board Connectors Connector J1 J2 J3 J4 J5 J6 J7 J8 J9 J10 Function Analog inputs (V0A to V3A) Analog inputs (V4A to V7A) Analog inputs (V0A to V3B) Analog inputs (V4B to V7B) Digital input/output pins for debug/standalone mode External reference SMA input External power connector, 7 V to 9 V dc input External VDRIVE power connector External VCC power connector 120-way connector for the EVAL-SDP-CB1Z Rev. A | Page 6 of 18 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide UG-1012 EVALUATION BOARD SOFTWARE 4. SOFTWARE INSTALLATION PROCEDURES Select the location to install the software and click Next. Download the AD7616/AD7616-P evaluation software from the AD7616 or the ADP7616-P evaluation board product page to install on a PC before using the EVAL-AD7616SDZ/EVALAD7616-PSDZ evaluation board. There are two steps to the installation process: AD7616/AD7616-P evaluation software installation EVAL-SDP-CB1Z driver installation Warning 14723-004 The evaluation board software and drivers must be installed before connecting the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ and EVAL-SDP-CB1Z to the USB port of the PC to ensure the evaluation system is correctly recognized when it is connected to the PC. Figure 5. Evaluation Software Installation--Destination Directory Dialog Box Installing the AD7616/AD7616-P Evaluation Board Software 5. To install the AD7616/AD7616-P evaluation board software, 1. 2. Download the AD7616/AD7616-P evaluation software to a Windows-based PC and unzip the file. Double-click the setup.exe file to begin the installation. By default, the software is saved to the following location: C:\Program Files\Analog Devices\AD7616\. A dialog box appears asking for permission to allow the program to make changes to the PC. Click Yes to begin the installation process. 14723-005 3. A license agreement appears. Read the agreement, select I accept the License Agreement, and click Next. Figure 6. Evaluation Software Installation--Accepting the License Agreement 14723-003 6. A summary of the installation displays. Click Next to continue. 14723-006 Figure 4. Evaluation Software Installation--User Account Control Dialog Box Figure 7. Evaluation Software Installation--Start Installation Dialog Box Rev. A | Page 7 of 18 UG-1012 The Installation Complete dialog box informs the user when the evaluation software installation is complete. Click Next to proceed with the installation of the drivers. 2. Select a location to install the drivers and click Install. 14723-007 14723-009 7. EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide Figure 8. Evaluation Software Installation--Installation Complete Dialog Box Figure 10. EVAL-SDP-CB1Z Drivers Installation--Choose Install Location Dialog Box 3. Click Install to proceed with the installation. Installing the EVAL-SDP-CB1Z SDP Board Drivers After the installation of theAD7616/AD7616-P evaluation board software completes, the ADI SDP Drivers Setup wizard window opens for the installation of the EVAL-SDP-CB1Z SDP board drivers. To install the drivers, continue with the following process: 14723-010 Ensure all other applications are closed and click Next to begin the driver installation process. Figure 11. EVAL-SDP-CB1Z Drivers Installation--Windows Security Dialog Box 4. To complete the drivers installation, click Finish, which closes the installation wizard. 14723-008 Figure 9. EVAL-SDP-CB1Z Drivers Installation--Setup Wizard 14723-011 1. Figure 12. EVAL-SDP-CB1Z Drivers Installation--Completing the Installation Rev. A | Page 8 of 18 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide EVALUATION BOARD SETUP PROCEDURES Verifying the Board Connection The EVAL-AD7616SDZ/EVAL-AD7616-PSDZ evaluation board connects to the EVAL-SDP-CB1Z. The EVAL-SDP-CB1Z is the controller board, which is the communication link between the PC and the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ. Figure 2 shows a photograph of the connections between the EVALAD7616SDZ/EVAL-AD7616-PSDZ evaluation board and the EVAL-SDP-CB1Z. 1. Allow the Found New Hardware Wizard to run after the EVAL-SDP-CB1Z board is plugged into the PC. a. If using Windows XP, search for the EVAL-SDP-CB1Z drivers. b. Choose to automatically search for the drivers for the EVAL-SDP-CB1Z board if prompted by the operating system. Check that the evaluation board is connected to the PC correctly using the Device Manager of the PC by rightclicking My Computer and then Manage. a. A dialog box appears asking for permission to allow the program to make changes to the computer. Click Yes. b. The Computer Management window appears. From the list of System Tools, click Device Manager. Under ADI Development Tools, Analog Devices System Demonstration Platform SDP-B appears (see Figure 13), indicating the EVAL-SDP-CB1Z driver software is installed and the board is connected to the PC correctly. 2. After following the instructions in the Software Installation Procedures section, set up the EVAL-AD7616SDZ/EVALAD7616-PSDZ and EVAL-SDP-CB1Z as detailed in this section. Warning The evaluation software and drivers must be installed before connecting the evaluation board and EVAL-SDP-CB1Z to the USB port of the PC to ensure that the evaluation system is correctly recognized when it is connected to the PC. 3. Connecting the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ and EVAL-SDP-CB1Z to a PC 2. 3. 4. Ensure all configuration links are in the appropriate positions (see Table 2). Connect the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ board securely to the CON A J2 120-way connector on the EVAL-SDP-CB1Z. The EVAL-AD7616SDZ/EVAL-AD7616-PSDZ board requires an external power supply adapter, which is included in the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ kit. Connect this power supply to the dc barrel connector, J7, on the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ board. Connect the EVAL-SDP-CB1Z board to the PC via the USB cable enclosed in the EVAL-SDP-CB1Z kit. 14723-012 1. UG-1012 Figure 13. Device Manager Window-- Checking the EVAL-SDP-CB1Z Is Connected to the PC Correctly Disconnecting the EVAL-AD7616SDZ/EVAL-AD7616PSDZ Evaluation Board Always remove power from the EVAL-SDP-CB1Z or click the reset tact switch (located alongside the mini USB port) before removing the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ evaluation board. Rev. A | Page 9 of 18 UG-1012 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide AD7616 EVALUATION SOFTWARE OPERATION LAUNCHING THE SOFTWARE Sampling Frequency After the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ and EVALSDP-CB1Z boards are correctly connected to the PC, the AD7616 evaluation software can launch. The Sampling Freq field, Label 4 in Figure 21, controls the throughput rate of the device. The software is capable of running at a maximum throughput rate of 1 MSPS. 1. Help The Help button, Label 5 in Figure 21, launches a short tutorial on how to use the AD7616 or AD7616-P evaluation software. Use the tutorial in conjunction with this user guide. Input Range The Input Range button, Label 6 in Figure 21, allows for independent configurations of the input range per channel. Clicking the Input Range button opens the VA_INPUT_RANGE window, shown in Figure 15. 14723-014 2. From the Start menu, select Programs > Analog Devices > AD7616. The main window of the software then opens (see Figure 21). If the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ evaluation board is not connected to the USB port via the EVAL-SDP-CB1Z when the software is launched, a connectivity error displays (see Figure 14). Connect the EVAL-AD7616SDZ/EVAL-AD7616-PSDZ and EVALSDP-CB1Z to the USB port of the PC and wait a few seconds, then click Refresh and follow the instructions. Figure 14. Connectivity Error Alert SETTING UP THE SYSTEM FOR DATA CAPTURE 1. 2. 14723-115 After completing the steps in the Software Installation Procedures section and the Evaluation Board Setup Procedures section, set up the system for data capture as follows: Select the desired device settings Click the Sample button to gather data Figure 15. Input Range Window DESCRIPTION OF MAIN WINDOW Multiplexer Configuration When the software launches, the main software window opens (see Figure 21) and displays the significant control buttons and analysis indicators of the AD7616 evaluation board software. The Multiplexer Configuration button, Label 7 in Figure 21, allows the user to select the next channel for conversion when the sequencer is not in use. Clicking the button opens the INPUT_MUX window, prompting the user to configure the channel pair on which the conversion performs, shown in Figure 16. ADC Reset The ADC Reset button, Label 1 in Figure 21, performs a hardware reset to the AD7616 or AD7616-P. This returns the device to a known-good state and reinitializes all registers to their default values. Window Tabs Label 2 in Figure 21 are the tabs that switch between the Device Configuration, Waveform, Analysis, and Register Map views. The Input Range dropdown menu, Label 3 in Figure 21, sets the analog input range for analysis on the AD7616 or AD7616-P. The range must match that selected from the Input Range button, otherwise the analysis result is incorrect. 14723-116 Input Range Figure 16. Multiplexer Configuration in Manual Mode Rev. A | Page 10 of 18 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide UG-1012 Oversampling The Flexible Sequencer button, Label 8 in Figure 21, enables the sequencer and burst modes on the AD7616 or AD7616-P. The user can program the 32-layer sequencer stack registers via the Register Map tab, shown in Figure 25. Any combination of ADC A/ADC B channel pairs can be configured in the sequencer stack. It is not possible to configure two ADC A channels or two ADC B channels in a single layer. Refer to the AD7616 or the AD7616-P data sheet for a detailed explanation of the sequencer. Clicking the Flexible Sequencer button opens the SEQUENCER_ ALL window, shown in Figure 17. The Oversampling button, Label 9 in Figure 21, allows the user to select the oversampling ratio of the on-board digital filter. Clicking the button opens the OSR window, shown in Figure 19. 14723-119 Sequencer Control Figure 19. OSR Window ADC Configuration 14723-117 The ADC Configuration button, Label 10 in Figure 21, allows the user to view/control the self detect error flag, the status register output, and the CRC of the AD7616 or AD7616-P. Refer to the AD7616 or AD7616-P data sheet for a detailed explanation of these register items. Clicking the ADC Configuration button opens the ADC_CONFIG window, shown in Figure 20. Figure 17. SEQUENCER_ALL Window 14723-120 Additionally, the software continuously monitors the channels programmed to the sequencer stack for nonperiodic channels within the sequence. If it detects a sequence with nonperiodic channels, a warning message appears, alerting the user (see Figure 18). It is possible to perform fast Fourier transform (FFT) analysis on periodically sampled data only; if a nonperiodic sequence is detected, the associated FFT for that channel disables. The user can still sample and plot the waveform data for the nonperiodic sequence after acknowledging the warning message. 14723-118 Figure 20. ADC_CONFIG Window Figure 18. Nonperiodic Sequence Warning Rev. A | Page 11 of 18 UG-1012 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide 3 2 4 1 5 6 10 9 7 14723-121 8 Figure 21. AD7616 Evaluation Software Main Window Rev. A | Page 12 of 18 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide 11 UG-1012 12 13 14 16 15 17 18 14723-016 19 Figure 22. Waveform Tab WAVEFORM ANALYSIS Sample Figure 22 illustrates the Waveform tab used for waveform capture. The Sample button, Label 14 in Figure 22, initiates a single or continuous acquisition depending on the option selected in the Batch dropdown menu. Analysis Channel The Analysis Ch dropdown menu, Label 11 in Figure 22, selects a channel on which to perform a waveform analysis. The results display in the waveform analysis pane, Label 15 in Figure 22, and in the Analysis tab. Samples The Samples dropdown menu, Label 12 in Figure 22, selects the number of samples to acquire per ADC acquisition. Batch The Batch dropdown menu, Label 13 in Figure 22, dictates whether a single batch of samples is gathered, defined by the Samples dropdown menu, or whether samples are gathered continuously until the user manually stops acquisition. Waveform Graph The data waveform displayed in the data waveform graph, Label 15 in Figure 22, shows each successive sample of the ADC output. The user can zoom and pan the waveform using the embedded waveform tools. The user can change the scales on the axes by typing values into the x-axis and y-axis. Channel Selection The checkboxes listed under Label 16 in Figure 22 allow the user to choose which channels to display on the data waveform graph. These controls affect the display of the channels on the graph only and do not have any effect on the channel settings in the ADC register map. Rev. A | Page 13 of 18 UG-1012 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide Display Units and Axis Controls CRC Value Label 17 in Figure 22 contains controls to format the waveform graph. Click the Display Units dropdown menu to select whether the data graph displays in units of volts or codes. This affects both the waveform graph and the histogram graph in the Analysis tab. The axis controls can be switched between dynamic and fixed. When CRC is enabled in the Status register, the CRC result is calculated in the software for the received data and compared with the CRC result appended to the conversion results. Errors detected are shown in Label 18 in Figure 22. When selecting either Y-scale Dynamic or X-scale Dynamic, the corresponding axis width automatically adjusts to show the entire range of the ADC results after each batch of samples. When selecting either Y-scale Fixed or X-scale Fixed, the user can control the corresponding axis ranges; the ranges do not adjust after each sample batch. Waveform Analysis (VA 0) The Waveform Analysis (VA 0) pane, Label 19 in Figure 22, displays amplitude, frequency, and noise analysis data for the selected analysis channel. Rev. A | Page 14 of 18 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide UG-1012 20 21 22 14723-017 23 Figure 23. Analysis Tab for FFT Analysis ANALYSIS TAB Figure 23 shows the Analysis tab displaying FFT and histogram information for the last batch of samples gathered. FFT/Histogram Selection The FFT/Histogram Selection spin box, Label 20 in Figure 23, allows the user to display FFT or histogram analysis in the Analysis tab. The waveform graph and FFT Analysis (VA 0) data (Label 21 and Label 22, respectively) change display according to the option selected in the FFT/Histogram Selection spin box. Harmonic Content The Show Harmonic Content button, Label 23 in Figure 23, displays the harmonic content of the sampled signal when viewing the FFT analysis. Rev. A | Page 15 of 18 UG-1012 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide 24 25 14723-124 26 Figure 24. Analysis Tab for Histogram Histogram Graph Histogram Analysis The histogram graph is displayed in Label 25, Figure 24. This graph displays the number of hits per code within the sampled data. Useful for dc analysis, the histogram indicates noise performance of the device. The Histogram Analysis pane, Label 26 in Figure 24, changes display according to the option selected in the FFT/Histogram Selection spin box. It provides information related to the dc performance of the AD7616 or AD7616-P. Rev. A | Page 16 of 18 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide 27 UG-1012 28 29 14723-125 30 Figure 25. Register Map Tab REGISTER MAP TAB Bitfields Register Tree The Bitfields pane, Label 29 in Figure 25, shows the bit fields within a selected register. The values can be changed using the Value dropdown menu or directly entering a value in the numeric field. The register tree, Label 27 in Figure 25, displays the full register map in a hierarchical tree view. Each register is shown as a branch. Click the expand button next to each register to show the bit fields contained within the corresponding register. Register Control The Register pane, Label 28 in Figure 25, allows the user to change an individual bit of the register, selected from the register tree, by either clicking the relevant bit or typing the register value into the numeric field. Save and Load The Save button, Label 30 in Figure 25, allows the user to save the current register map setting to a file. The Load button allows the user to load a setting from a previously saved file. EXITING THE SOFTWARE To exit the software, click the Close button of any window, or press Esc on the computer keyboard. Rev. A | Page 17 of 18 UG-1012 EVAL-AD7616SDZ/EVAL-AD7616-PSDZ User Guide NOTES ESD Caution ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the "Evaluation Board"), you are agreeing to be bound by the terms and conditions set forth below ("Agreement") unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you ("Customer") and Analog Devices, Inc. ("ADI"), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term "Third Party" includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED "AS IS" AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER'S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI'S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. (c)2016-2017 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. UG14723-0-6/17(A) Rev. A | Page 18 of 18