Document Number: 28116 For technical questions, contact: RFI@vishay.com www.vishay.com
Revision: 23-Feb-11 383
Interference Suppression Film Capacitors
MKP Radial Potted Type
MKP338 1 X1
Vishay BCcomponents
Dimensions in mm
Note
(1) |F - F’| < 0.3 mm
F = 7.5 mm + 0.6 mm/- 0.1 mm
APPLICATIONS
For standard across the line X1 applications.
See also Application Note:
www.vishay.com/doc?28153
REFERENCE STANDARDS
“IEC 60384-14 ed-3 and EN 60384-14”
“IEC 60065, pass. flamm. class B”
UL1414; UL1283; CSA-C22.2 No. 8
MARKING
C-value; tolerance; rated voltage; sub-class; manufacturer’s
type designation; code for dielectric material; manufacturer
location; manufacturer’s logo; year, week and safety
approvals.
DIELECTRIC
Polypropylene film
ELECTRODES
Metallized film
CONSTRUCTION
Mono construction
RATED VOLTAGE
AC 440 V; 50 Hz to 60 Hz
FEATURES
15 mm to 27.5 mm lead pitch and 15 mm bent
back to 7.5 mm
Supplied loose in box, taped on ammopack or
reel
Compliant to RoHS Directive 2002/95/EC
PERMISSIBLE DC VOLTAGE
DC 1000 V
ENCAPSULATION
Plastic case, epoxy resin sealed, flame retardant
UL-class 94 V-0
CLIMATIC TESTING CLASS ACC. TO
IEC 60068-1
55/105/56/B
CAPACITANCE RANGE (E12 SERIES)
E12 series 0.01 µF to 1 µF
Preferred values acc. to E6
CAPACITANCE TOLERANCE
± 20 %; ± 10 %; ± 5 %
LEADS
Tinned wire
MAXIMUM APPLICATION TEMPERATURE
105 °C
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
RFI@vishay.com
w
Ø d
t
P
h
ll
hh'
w
Ø d
t
H
F
10
F' (1)
15
lt
www.vishay.com For technical questions, contact: RFI@vishay.com Document Number: 28116
384 Revision: 23-Feb-11
MKP338 1 X1
Vishay BCcomponents Interference Suppression Film Capacitors
MKP Radial Potted Type
COMPOSITION OF CATALOG NUMBER
Note
(1) For detailed tape specification refer to Packaging Information: www.vishay.com/doc?28139
SPECIFIC REFERENCE DATA
Note
(1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169
Example:
104 = 10 x 10 = 100 nF
(except special numbers)
BFC2 338 1X XX X
2222 (*) 338 1X XX X
TYPE PACKAGING LEAD CONFIGURATION C-TOL PREFERRED TYPES
338 1
X1
Loose in box
Lead length 3.5 mm ± 0.3 mm
± 20 %
BFC2 338 10 ...
Lead length 5.0 mm ± 1.0 mm BFC2 338 12 ...
Lead length 25.0 mm ± 2.0 mm BFC2 338 14 ...
Taped on reel (1) Bent back to 7.5 mm;
H = 16.0 mm; P0= 15.0 mm; reel diameter = 500 mm BFC2 338 16 ...
ALTERNATIVE TAPED VERSIONS ON REQUEST
338 1
X1
X1
Taped on reel (1) H = 18.5 mm; for P012.7 mm; reel diameter 500 mm ± 20 % BFC2 338 17 ...
ALTERNATIVE C-TOL. ON REQUEST
338 1
X1
Loose in box
Lead length 3.5 mm ±0.3 mm ± 10 %
See tables for detail
± 5 %
Lead length 5.0 mm ±1.0 mm ± 10 %
± 5 %
Lead length 25.0 mm ±2.0 mm ± 10 %
± 5 %
Taped on reel (1)
Bent back to 7.5 mm; ± 10 %
H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm ± 5 %
H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm ± 10 %
± 5 %
TYPE AND PITCHES
338 1
X1
7.5 mm (bent back)
15.0 mm
22.5 mm
27.5 mm
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
(*) Old ordering code
DESCRIPTION VALUE
Rated AC voltage (URAC)440 V
Permissible DC voltage (URDC)1000 V
Tangent of loss angle: at 1 kHz at 10 kHz
C 470 nF 10 x 10-4 20 x 10-4
C 470 nF 20 x 10-4 70 x 10-4
Rated voltage pulse slope (dU/dt)R at 615 VDC
Pitch = 15 mm and 7.5 mm (bent back)
Pitch=22.5mm
Pitch=27.5mm
250 V/µs
150 V/µs
100 V/µs
R between leads, for C 0.33 µF at 100 V, 1 min > 15 000 M
RC between leads, for C > 0.33 µF at 100 V, 1 min >5000 s
R between leads and case, 100 V, 1 min > 30 000 M
Withstanding (DC) voltage (cut off current 10 mA), rise time 1000 V/s 3400 V, 1 min
Withstanding (AC) voltage between leads and case 2380 V, 1 min
Maximum application temperature 105 °C
Document Number: 28116 For technical questions, contact: RFI@vishay.com www.vishay.com
Revision: 23-Feb-11 385
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type Vishay BCcomponents
C-tol. = ± 20 %
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
C
(µF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
LOOSE IN BOX TAPED
Short leads Long leads Reel diameter = 500 mm (1)(2)
lt =
3.5 mm ±
0.3 mm
lt =
5.0 mm ±
1.0 mm
SPQ
lt=
25.0 mm ±
2.0 mm
SPQ H = 18.5 mm;
P0 = 12.7 mm SPQ
Pitch = 15.0 mm ± 0.4 mm; dt= 0.60 mm ± 0.06 mm
0.01
5.0 x 11.0 x 17.5 1.0
10103 12103
1000
14103
1000
17103
1100
0.012 10123 12123 14123 17123
0.015 10153 12153 14153 17153
0.018 10183 12183 14183 17183
0.022 10223 12223 14223 17223
0.027 6.0 x 12.0 x 17.5 1.4 10273 12273 1000 14273 1000 17273 900
0.033 10333 12333 14333 17333
Pitch = 15.0 mm ± 0.4 mm; dt= 0.80 mm ± 0.08 mm
0.039 7.0 x 13.5 x 17.5 1.8 10393 12393 750 14393 500 17393 800
0.047 10473 12473 14473 17473
0.056 8.5 x 15.0 x 17.5 2.4 10563 12563 750 14563 500 17563 650
0.068 10683 12683 14683 17683
0.082 10.0 x 16.5 x 17.5 3.0 10823 12823 500 14823 450 17823 600
0.1 10104 12104 14104 17104
Pitch = 22.5 mm ± 0.4 mm; dt=0.80 mm ± 0.08 mm
0.12 8.5 x 18.0 x 26.0 3.8 10124 12124 200 14124 250 17124 450
0.15 10154 12154 14154 17154
0.18 10.0 x 19.5 x 26.0 6.8 10184 12184 200 14184 200 17184 350
0.22 10224 12224 14224 17224
Pitch = 27.5 mm ± 0.4 mm; dt= 0.80 mm ± 0.08 mm
0.27 11.0 x 21.0 x 31.0 7.4 10274 12274 100 14274 125
0.33 13.0 x 23.0 x 31.0 9.2 10334 12334 100 14334 125
0.39 15.0 x 25.0 x 31.5 12.3 10394 12394 100 14394 125
0.47 10474 12474 14474
0.56 18.0 x 28.0 x 31.5 16.1 10564 12564 100 14564 100
0.68 10684 12684 14684
0.82 21.0 x 31.0 x 31.0 20.3 10824 12824 50 14824 75
1.00 10105 12105 14105
www.vishay.com For technical questions, contact: RFI@vishay.com Document Number: 28116
386 Revision: 23-Feb-11
MKP338 1 X1
Vishay BCcomponents Interference Suppression Film Capacitors
MKP Radial Potted Type
Bent back pitch 7.5 mm (only taped); C-tol. = ± 20 %
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
C-tol. = ± 10 %
C
(µF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
LOOSE IN BOX TAPED
Short leads Long leads Reel diameter = 500 mm (1)(2)
lt =
3.5 mm ±
0.3 mm
lt =
5.0 mm ±
1.0 mm
SPQ
lt=
25.0 mm ±
2.0 mm
SPQ H = 16.0 mm;
P0 = 15.0 mm SPQ
Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm
0.010
5.0 x 13.0 x 17.5 1.0
16103
950
0.012 16123
0.015 16153
0.018 16183
0.022 16223
0.027 6.0 x 14.0 x 17.5 1.4 16273 800
0.033 16333
Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
0.039 7.0 x 15.5 x 17.5 1.8 16393 700
0.047 16473
0.056 8.5 x 17.0 x 17.5 1.4 16563 550
0.068 16683
0.082 10.0 x 18.5 x 17.5 3.0 16823 500
0.100 16104
C
(µF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
LOOSE IN BOX TAPED
Short leads Long leads Reel diameter = 500 mm (1)(2)
lt =
3.5 mm ±
0.3 mm
lt =
5.0 mm ±
1.0 mm
SPQ
lt=
25.0 mm ±
2.0 mm
SPQ H = 18.5 mm;
P0 = 12.7 mm SPQ
Pitch = 15.0 mm ± 0.4 mm; dt=0.60mm ± 0.06mm
0.010
5.0 x 11.0 x 17.5 1.0
18114 18314
1000
18514
1000
18914
1100
0.012 18115 18315 18515 18915
0.015 18116 18316 18516 18916
0.018 18117 18317 18517 18917
0.022 6.0 x 12.0 x 17.5 1.4 18118 18318 1000 18518 1000 18918 900
0.027 18119 18319 18519 18919
Pitch = 15.0 mm ± 0.4 mm; dt=0.80mm ± 0.08mm
0.033 7.0 x 13.5 x 17.5 1.8 18121 18321 750 18521 500 18921 800
0.039 18122 18322 18522 18922
0.047 8.5 x 15.0 x 17.5 2.4 18123 18323 750 18523 500 18923 650
0.056 18124 18324 18524 18924
0.068 10.0 x 16.5 x 17.5 3.0 18125 18325 500 18525 450 18925 600
0.082 18126 18326 18526 18926
Document Number: 28116 For technical questions, contact: RFI@vishay.com www.vishay.com
Revision: 23-Feb-11 387
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type Vishay BCcomponents
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Bent back pitch 7.5 mm (only taped); C-tol. = ± 10 %
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Pitch = 22.5 mm ± 0.4 mm; dt= 0.80 mm ± 0.08 mm
0.10 7.0 x 16.5 x 26.0 2.9 18127 18327 200 18527 250 18927 550
0.12 8.5 x 18.0 x 26.0 3.8 18128 18328 200 18528 250 18928 450
0.15 18129 18329 18529 18929
0.18 10.0 x 19.5 x 26.0 6.8 18131 18331 200 18531 200 18931 350
Pitch = 27.5 mm ± 0.4 mm; dt= 0.80 mm ± 0.08 mm
0.22 11.0 x 21.0 x 31.0 7.4 18132 18332 100 18532 125
0.27 18133 18333 18533
0.33 13.0 x 23.0 x 31.0 9.2 18134 18334 100 18534 125
0.39 15.0 x 25.0 x 31.0 12.3 18135 18335 100 18535 125
0.47 18136 18336 18536
0.56 18.0 x 28.0 x 31.0 16.1 18137 18337 100 18537 100
0.68 18138 18338 18538
0.82 21.0 x 31.0 x 31.0 20.3 18139 18339 50 18539 75
C
(µF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
LOOSE IN BOX TAPED
Short leads Long leads Reel diameter = 500 mm (1)(2)
lt =
3.5 mm ±
0.3 mm
lt =
5.0 mm ±
1.0 mm
SPQ
lt=
25.0 mm ±
2.0 mm
SPQ H = 18.5 mm;
P0 = 12.7 mm SPQ
C
(µF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
LOOSE IN BOX TAPED
Short leads Long leads Reel diameter = 500 mm (1)(2)
lt =
3.5 mm ±
0.3 mm
lt =
5.0 mm ±
1.0 mm
SPQ
lt=
25.0 mm ±
2.0 mm
SPQ H = 18.5 mm;
P0 = 12.7 mm SPQ
Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm
0.010
5.0 x 13.0 x 17.5 1.0
18714
950
0.012 18715
0.015 18716
0.018 18717
0.022 6.0 x 14.0 x 17.5 1.4 18718 800
0.027 18719
Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
0.033 7.0 x 15.5 x 17.5 1.8 18721 700
0.039 18722
0.047 8.5 x 17.0 x 17.5 2.4 18723 550
0.056 18724
0.068 10.0 x 18.5 x 17.5 3.0 18725 500
0.082 18726
www.vishay.com For technical questions, contact: RFI@vishay.com Document Number: 28116
388 Revision: 23-Feb-11
MKP338 1 X1
Vishay BCcomponents Interference Suppression Film Capacitors
MKP Radial Potted Type
C-tol. = ± 5 %
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Bent back pitch (only taped); C-tol. = ± 5 %
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
C
(µF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
LOOSE IN BOX TAPED
Short leads Long leads Reel diameter = 500 mm (1)(2)
lt =
3.5 mm ±
0.3 mm
lt =
5.0 mm ±
1.0 mm
SPQ
lt=
25.0 mm ±
2.0 mm
SPQ H = 18.5 mm;
P0 = 12.7 mm SPQ
Pitch = 15.0 mm ± 0.4 mm; dt=0.60mm ± 0.06mm
0.010
5.0 x 11.0 x 17.5 1.0
18214 18414
1000
18614
1000
18934
1100
0.012 18215 18415 18615 18935
0.015 18216 18416 18616 18936
0.018 18217 18417 18617 18937
0.022 6.0 x 12.0 x 17.5 1.4 18218 18418 1000 18618 1000 18938 900
0.027 18219 18419 18619 18939
Pitch = 15.0 mm ± 0.4 mm; dt=0.80mm ± 0.08mm
0.033 7.0 x 13.5 x 17.5 1.8 18221 18421 750 18621 500 18941 800
0.039 18222 18422 18622 18942
0.047 8.5 x 15.0 x 17.5 2.4 18223 18423 750 18623 500 18943 650
0.056 18224 18424 18624 18944
0.068 10.0 x 16.5 x 17.5 3.0 18225 18425 500 18625 450 18945 600
0.082 18226 18426 18626 18946
Pitch = 22.5 mm ± 0.4 mm; dt=0.80mm ± 0.08mm
0.10 8.5 x 18.0 x 26.0 3.8 18227 18427 200 18627 250 18947 450
0.12 18228 18428 18628 18948
0.15 10.0 x 19.5 x 26.0 6.8 18229 18429 200 18629 200 18949 350
0.18 18231 18431 18631 18951
Pitch = 27.5 mm ± 0.4 mm; dt=0.80mm ± 0.08mm
0.22 11.0 x 21.0 x 31.0 7.4 18232 18432 100 18632 125
0.27 13.0 x 23.0 x 31.0 9.2 18233 18433 100 18633 125
0.33 18234 18434 18634
0.39 15.0 x 25.0 x 31.5 12.3 18235 18435 100 18635 125
0.47 18236 18436 18636
0.56 18.0 x 28.0 x 31.5 16.1 18237 18437 100 18637 100
0.68 18238 18438 18638
0.82 21.0 x 31.0 x 31.0 20.3 18239 18439 50 18639 75
C
(µF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
LOOSE IN BOX TAPED
Short leads Long leads Reel diameter = 500 mm (1)
lt =
3.5 mm ±
0.3 mm
lt =
5.0 mm ±
1.0 mm
SPQ
lt=
25.0 mm ±
2.0 mm
SPQ H = 16.0 mm;
P0 = 15.0 mm SPQ
Original pitch = 15.0 mm; bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm
0.010
5.0 x 13.0 x 17.5 1.0
18814
950
0.012 18815
0.015 18816
0.018 18817
0.022 6.0 x 14.0 x 17.5 1.4 18818 800
0.027 18819
Original pitch = 15.0 mm; bent back pitch = 7.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.033 7.0 x 15.5 x 17.5 1.8 18821 700
0.039 18822
0.047 8.5 x 17.0 x 17.5 2.4 18823 550
0.056 18824
0.068 10.0 x 18.5 x 17.5 3.0 18825 500
0.082 18826
Document Number: 28116 For technical questions, contact: RFI@vishay.com www.vishay.com
Revision: 23-Feb-11 389
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type Vishay BCcomponents
APPROVALS
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to: “Packaging Information”: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
For pitches 15 mm capacitors shall be mechanically fixed by the leads
For longer pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and heigth (hmax. ) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
For products with pitch 15 mm, w = l = 0.3 mm; h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
SAFETY APPROVALS X1 VOLTAGE VALUE FILE NUMBERS
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-3)440 VAC 10 nF to 1 µF FI 2008060 A1
UL1414 250 VAC 10 nF to 1 µF E112471
UL1283 440 VAC 10 nF to 100 nF E109565
UL1283 and (CSA-C22.2 No. 8) 440 VAC 100 nF to 1 µF E109565
CB-Test Certificate 440 VAC 10 nF to 1 µF FI 5256 A1
The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
16
®
CBA116
Eccentricity
wmax. = W + Δ
hmax. = h + Δ
Imax. = I + Δ
Seating plane
www.vishay.com For technical questions, contact: RFI@vishay.com Document Number: 28116
390 Revision: 23-Feb-11
MKP338 1 X1
Vishay BCcomponents Interference Suppression Film Capacitors
MKP Radial Potted Type
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve) Tangent of loss angle as a function of frequency (typical curve)
Impedance as a function of frequency (typical curve) Resonant frequency as a function of capacitance (typical curve)
Max. RMS voltage as a function of frequency Max. RMS current as a function of frequency
typical
- 50
ΔC/C
(%)
2
- 2
- 4
- 6
0
050100Tamb (°C)
4
min.
max.
Dissipation
Factor (x 10
- 4
)
10
10
10
10
10 10 10
1010
1234
5
0
1
2
3
f(Hz)
C = 1 µF
220 nF < C < 1µF
47 nF < C ≤ 220 nF
10 nF < C ≤ 47 nF
105
104 106107
10
8
f (Hz)
103
100
10-1
102
101
10-2
Impedance
(Ω)
1000 nF
470 nF
100 nF
47 nF
10 nF
100
10-1
102
101
f (Mhz)
10 100 1000 10 000
°C (nF)
X 1
1
Tamb ≤ 105 °C
AC voltage
(V)
103
102
101
f (Hz)
101102103104105
102
103
104
101
100
10-1
10
2
10
1
10
3
10
4
10
5
f (Hz)
470 nF
100 nF
47 nF
10 nF
1000 nF
1 nF
4.7 nF
AC current
(mA)
Tamb ≤ 105 °C
Document Number: 28116 For technical questions, contact: RFI@vishay.com www.vishay.com
Revision: 23-Feb-11 391
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type Vishay BCcomponents
Insulation resistance as a function of ambient temperature
APPLICATION NOTES
For X1 electromagnetics interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum
mains voltage of 440 VAC.
For series impedance applications we refer to Application Note www.vishay.com/doc?28153
For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information
depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com
These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
The maximum ambient temperature must not exceed 105 °C.
Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 615 VDC and
divided by the applied voltage.
106
105
104
020 40 60 80100
Tamb (°C)
RC (s)
www.vishay.com For technical questions, contact: RFI@vishay.com Document Number: 28116
392 Revision: 23-Feb-11
MKP338 1 X1
Vishay BCcomponents Interference Suppression Film Capacitors
MKP Radial Potted Type
INSPECTION REQUIREMENTS
General Notes:
1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication
IEC 60384-14 ed-3 and Specific Reference Data.”
Group C Inspection Requirements
SUB-CLAUSE NUMBER
AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1 Dimensions (detail) As specified in chapters “General data” of
this specification
Initial measurements Capacitance
Tangent of loss angle at 10 kHz
4.3 Robustness o terminations Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
No visible damage
4.4 Resistance to soldering heat No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
4.19 Component solvent resistance Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time:
Min. 1 h, max. 2 h
4.4.2 Final measurements Visual examination No visible damage
Legible marking
Capacitance C/C| 5 % of the value measured initially
Tangent of loss angle Increase of tan 0.008
Compared to values measured initially
Insulation resistance As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
Initial measurements Capacitance
Tangent of loss angle at 10 kHz
4.20 Solvent resistance of the marking Isopropylalcohol at room temperature
Method: 1
Rubbing material: cotton wool
Immersion time: 5 min ± 0.5 min
No visible damage
Legible marking
4.6 Rapid change of temperature A = - 55 °C
B = + 105 °C
5 cycles
Duration t = 30 min
Document Number: 28116 For technical questions, contact: RFI@vishay.com www.vishay.com
Revision: 23-Feb-11 393
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type Vishay BCcomponents
4.6.1 Inspection
4.7 Vibration
Visual examination
Mounting: See section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
No visible damage
4.7.2 Final inspection Visual examination No visible damage
4.9 Shock Mounting: See section “Mounting” for more
information
Pulse shape: half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
4.9.2 Final measurements Visual examination No visible damage
Capacitance C/C| 5 % of the value measured initially
Tangent of loss angle Increase of tan 0.008
Compared to values measured initially
Insulation resistance As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1 COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS C1A AND
C1B
4.11 Climatic sequence
4.11.1 Initial measurements Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat Temperature: 105 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Tes t D b
First cycle
4.11.4 Cold Temperature: - 55 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Tes t D b
Remaining cycles
4.11.6 Final measurements Visual examination No visible damage
Legible marking
Capacitance C/C| 5 % of the value measured in
4.11.1.
Tangent of loss angle Increase of tan 0.008
Compared to values measured in
4.11.1.
Voltage proof
1900 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-CLAUSE NUMBER
AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
www.vishay.com For technical questions, contact: RFI@vishay.com Document Number: 28116
394 Revision: 23-Feb-11
MKP338 1 X1
Vishay BCcomponents Interference Suppression Film Capacitors
MKP Radial Potted Type
SUB-GROUP C2
4.12 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH
No load
4.12.1 Initial measurements Capacitance
Tangent of loss angle at 1 kHz
4.12.3 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 5 % of the value measured in
4.12.1.
Tangent of loss angle Increase of tan 0.008
Compared to values measured in
4.12.1.
Voltage proof
1900 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C3
4.13.1 Initial measurements Capacitance
Tangent of loss angle at 10 kHz
4.13 Impulse voltage 3 successive impulses, full wave, peak
voltage:
X1: 4 kV
Max. 24 pulses
No self healing breakdowns or flash-over
4.14 Endurance Duration: 1000 h
1.25 x URAC at 105 °C
Once in every hour the voltage is increased
to 1000 VRMS for 0.1 s via resistor of
47 ± 5 %
4.14.7 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 10 % compared to values
measured in 4.13.1.
Tangent of loss angle Increase of tan 0.008
Compared to values measured in 4.13.1.
Voltage proof
1900 VDC; 1 min between terminations
2380 VAC; 1 min between terminations
and case.
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.15 Charge and discharge 10 000 cycles
Charged to 615 VDC
Discharge resistance:
4.15.1 Initial measurements Capacitance
Tangent of loss angle at 10 kHz
SUB-CLAUSE NUMBER
AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
Document Number: 28116 For technical questions, contact: RFI@vishay.com www.vishay.com
Revision: 23-Feb-11 395
MKP338 1 X1
Interference Suppression Film Capacitors
MKP Radial Potted Type Vishay BCcomponents
4.15.3 Final measurements Capacitance |C/C| 10 % compared to values
measured in 4.15.1.
Tangent of loss angle Increase of tan 0.008
Compared to values measured in 4.15.1.
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C5
4.16 Radio frequency characteristic Resonance frequency 0.9 times value as specified in section
“Resonant Frequency” of this specification
SUB-GROUP C6
4.17 Passive flammability
Class B
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm³:
V 250: 10 s
250 < V 500: 20 s
500 < V 1750: 30 s
V > 1750: 60 s
One flame application
After removing test flame from capacitor,
the capacitor must not continue to burn for
more than 10 s. No burning particle must
drop from the sample.
SUB-GROUP C7
4.18 Active flammability 20 cycles of 4 kV discharges on the test
capacitor connected to URAC
The cheese cloth around the capacitors
shall not burn with a flame.
No electrical measurements are required.
SUB-CLAUSE NUMBER
AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
45.0°
~ 8 mm
12 mm
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.