MKP338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type l l w FEATURES w h h' h F' lt P O dt (1) F H O dt 10 15 Dimensions in mm 15 mm to 27.5 mm lead pitch and 15 mm bent back to 7.5 mm Supplied loose in box, taped on ammopack or reel Compliant to RoHS Directive 2002/95/EC PERMISSIBLE DC VOLTAGE DC 1000 V Note (1) |F - F'| < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm ENCAPSULATION Plastic case, epoxy UL-class 94 V-0 APPLICATIONS For standard across the line X1 applications. See also Application Note: www.vishay.com/doc?28153 REFERENCE STANDARDS resin sealed, flame retardant CLIMATIC TESTING CLASS ACC. TO IEC 60068-1 55/105/56/B CAPACITANCE RANGE (E12 SERIES) "IEC 60384-14 ed-3 and EN 60384-14" "IEC 60065, pass. flamm. class B" UL1414; UL1283; CSA-C22.2 No. 8 E12 series 0.01 F to 1 F Preferred values acc. to E6 CAPACITANCE TOLERANCE MARKING C-value; tolerance; rated voltage; sub-class; manufacturer's type designation; code for dielectric material; manufacturer location; manufacturer's logo; year, week and safety approvals. 20 %; 10 %; 5 % LEADS Tinned wire DIELECTRIC MAXIMUM APPLICATION TEMPERATURE Polypropylene film 105 C ELECTRODES DETAIL SPECIFICATION Metallized film For more detailed data and test requirements contact: RFI@vishay.com CONSTRUCTION Mono construction RATED VOLTAGE AC 440 V; 50 Hz to 60 Hz Document Number: 28116 Revision: 23-Feb-11 For technical questions, contact: RFI@vishay.com www.vishay.com 383 MKP338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES 338 1 X1 MULTIPLIER (nF) CAPACITANCE (numerically) 7.5 mm (bent back) 15.0 mm 22.5 mm 27.5 mm 0.1 1 10 100 Example: 104 = 10 x 10 = 100 nF (except special numbers) BFC2 2222 (*) 2 3 4 5 338 1X XX X 338 1X XX X (*) Old ordering code TYPE PACKAGING 338 1 Loose in box X1 Taped on reel (1) 338 1 X1 Taped on reel (1) LEAD CONFIGURATION Lead length 3.5 mm 0.3 mm Lead length 5.0 mm 1.0 mm Lead length 25.0 mm 2.0 mm Bent back to 7.5 mm; H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm ALTERNATIVE TAPED VERSIONS C-TOL 20 % H = 18.5 mm; for P0 12.7 mm; reel diameter 500 mm 20 % PREFERRED TYPES BFC2 338 10 ... BFC2 338 12 ... BFC2 338 14 ... BFC2 338 16 ... ON REQUEST BFC2 338 17 ... X1 ALTERNATIVE C-TOL. ON REQUEST 10 % 5% 10 % 5% 10 % 5% 10 % 5% 10 % 5% Lead length 3.5 mm 0.3 mm Loose in box 338 1 Lead length 5.0 mm 1.0 mm Lead length 25.0 mm 2.0 mm X1 Taped on reel (1) Bent back to 7.5 mm; H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm See tables for detail Note (1) For detailed tape specification refer to Packaging Information: www.vishay.com/doc?28139 SPECIFIC REFERENCE DATA DESCRIPTION Rated AC voltage (URAC) Permissible DC voltage (URDC) Tangent of loss angle: C 470 nF C 470 nF Rated voltage pulse slope (dU/dt)R at 615 VDC Pitch = 15 mm and 7.5 mm (bent back) Pitch = 22.5 mm Pitch = 27.5 mm R between leads, for C 0.33 F at 100 V, 1 min RC between leads, for C > 0.33 F at 100 V, 1 min R between leads and case, 100 V, 1 min Withstanding (DC) voltage (cut off current 10 mA), rise time 1000 V/s Withstanding (AC) voltage between leads and case Maximum application temperature VALUE 440 V 1000 V at 1 kHz 10 x 10-4 20 x 10-4 at 10 kHz 20 x 10-4 70 x 10-4 250 V/s 150 V/s 100 V/s > 15 000 M >5000 s > 30 000 M 3400 V, 1 min 2380 V, 1 min 105 C Note (1) See "Voltage Proof Test for Metallized Film Capacitors": www.vishay.com/doc?28169 www.vishay.com 384 For technical questions, contact: RFI@vishay.com Document Number: 28116 Revision: 23-Feb-11 MKP338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type C-tol. = 20 % CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING C (F) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) Short leads lt = 3.5 mm 0.3 mm lt = 5.0 mm 1.0 mm TAPED Reel diameter = 500 mm (1)(2) Long leads SPQ lt = 25.0 mm 2.0 mm SPQ H = 18.5 mm; P0 = 12.7 mm SPQ Pitch = 15.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm 0.01 10103 12103 14103 17103 0.012 10123 12123 14123 17123 0.015 10153 12153 0.018 10183 12183 14183 17183 0.022 10223 12223 14223 17223 0.027 10273 12273 14273 10333 12333 0.033 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 1.0 1.4 1000 1000 14153 14333 1000 1000 17153 17273 17333 1100 900 Pitch = 15.0 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.039 0.047 0.056 0.068 0.082 0.1 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3.0 10393 12393 10473 12473 10563 12563 10683 12683 10823 12823 10104 12104 750 750 500 14393 14473 14563 14683 14823 14104 500 500 450 17393 17473 17563 17683 17823 17104 800 650 600 Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.12 0.15 0.18 0.22 8.5 x 18.0 x 26.0 3.8 10.0 x 19.5 x 26.0 6.8 10124 12124 10154 12154 10184 12184 10224 12224 200 200 14124 14154 14184 14224 250 200 17124 17154 17184 17224 450 350 Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.27 11.0 x 21.0 x 31.0 7.4 10274 12274 100 14274 125 0.33 13.0 x 23.0 x 31.0 9.2 10334 12334 100 14334 125 15.0 x 25.0 x 31.5 12.3 10394 12394 10474 12474 18.0 x 28.0 x 31.5 16.1 10564 12564 10684 12684 21.0 x 31.0 x 31.0 20.3 10824 12824 10105 12105 0.39 0.47 0.56 0.68 0.82 1.00 100 100 50 14394 14474 14564 14684 14824 14105 125 100 75 Notes * SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to "Packaging Information" 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only Document Number: 28116 Revision: 23-Feb-11 For technical questions, contact: RFI@vishay.com www.vishay.com 385 MKP338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Bent back pitch 7.5 mm (only taped); C-tol. = 20 % CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING C (F) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) Short leads lt = 3.5 mm 0.3 mm lt = 5.0 mm 1.0 mm TAPED Reel diameter = 500 mm (1)(2) Long leads SPQ lt = 25.0 mm 2.0 mm SPQ H = 16.0 mm; P0 = 15.0 mm SPQ Original pitch = 15.0 mm; bent back pitch = 7.5 mm 0.4 mm; dt = 0.60 mm 0.06 mm 0.010 16103 0.012 0.015 16123 5.0 x 13.0 x 17.5 1.0 16153 0.018 16183 0.022 16223 0.027 0.033 6.0 x 14.0 x 17.5 16273 1.4 16333 950 800 Original pitch = 15.0 mm; bent back pitch = 7.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.039 0.047 0.056 0.068 0.082 0.100 7.0 x 15.5 x 17.5 1.8 8.5 x 17.0 x 17.5 1.4 10.0 x 18.5 x 17.5 3.0 16393 16473 16563 16683 16823 16104 700 550 500 Notes * SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to "Packaging Information" 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only C-tol. = 10 % CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING C (F) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) Short leads lt = 3.5 mm 0.3 mm lt = 5.0 mm 1.0 mm TAPED Reel diameter = 500 mm (1)(2) Long leads SPQ lt = 25.0 mm 2.0 mm SPQ H = 18.5 mm; P0 = 12.7 mm SPQ Pitch = 15.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm 0.010 18114 18314 18514 0.012 18115 18315 18515 18116 18316 0.015 5.0 x 11.0 x 17.5 1.0 1000 18516 18914 1000 18915 18916 0.018 18117 18317 18517 18917 0.022 18118 18318 18518 18918 18119 18319 0.027 6.0 x 12.0 x 17.5 1.4 1000 18519 1000 18919 1100 900 Pitch = 15.0 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.033 0.039 0.047 0.056 0.068 0.082 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3.0 www.vishay.com 386 18121 18321 18122 18322 18123 18323 18124 18324 18125 18325 18126 18326 750 750 500 18521 18522 18523 18524 18525 18526 For technical questions, contact: RFI@vishay.com 500 500 450 18921 18922 18923 18924 18925 18926 800 650 600 Document Number: 28116 Revision: 23-Feb-11 MKP338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING C (F) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) Short leads lt = 3.5 mm 0.3 mm TAPED Reel diameter = 500 mm (1)(2) Long leads lt = 5.0 mm 1.0 mm SPQ 200 lt = 25.0 mm 2.0 mm SPQ H = 18.5 mm; P0 = 12.7 mm SPQ 18527 250 18927 550 18928 450 Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.10 0.12 0.15 0.18 7.0 x 16.5 x 26.0 2.9 8.5 x 18.0 x 26.0 3.8 10.0 x 19.5 x 26.0 6.8 18127 18327 18128 18328 18129 18329 18131 18331 200 200 18528 18529 18531 250 200 18929 18931 350 Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 11.0 x 21.0 x 31.0 7.4 13.0 x 23.0 x 31.0 9.2 15.0 x 25.0 x 31.0 12.3 18.0 x 28.0 x 31.0 16.1 21.0 x 31.0 x 31.0 20.3 18132 18332 18133 18333 18134 18334 18135 18335 18136 18336 18137 18337 18138 18338 18139 18339 100 100 100 100 50 18532 18533 18534 18535 18536 18537 18538 18539 125 125 125 100 75 Notes * SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to "Packaging Information" 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only Bent back pitch 7.5 mm (only taped); C-tol. = 10 % CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING LOOSE IN BOX TAPED DIMENSIONS C MASS Short leads Long leads Reel diameter = 500 mm (1)(2) w x h x l (F) (g) (3) l = l = l = t t t (mm) H = 18.5 mm; 3.5 mm 5.0 mm SPQ 25.0 mm SPQ SPQ P0 = 12.7 mm 0.3 mm 1.0 mm 2.0 mm Original pitch = 15.0 mm; bent back pitch = 7.5 mm 0.4 mm; dt = 0.60 mm 0.06 mm 0.010 18714 0.012 18715 5.0 x 13.0 x 17.5 1.0 950 0.015 18716 0.018 18717 0.022 18718 6.0 x 14.0 x 17.5 1.4 800 0.027 18719 Original pitch = 15.0 mm; bent back pitch = 7.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.033 18721 7.0 x 15.5 x 17.5 1.8 700 0.039 18722 18723 0.047 8.5 x 17.0 x 17.5 2.4 550 0.056 18724 0.068 18725 10.0 x 18.5 x 17.5 3.0 500 0.082 18726 Notes * SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to "Packaging Information" 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only Document Number: 28116 Revision: 23-Feb-11 For technical questions, contact: RFI@vishay.com www.vishay.com 387 MKP338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type C-tol. = 5 % CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING LOOSE IN BOX TAPED DIMENSIONS MASS C Short leads Long leads Reel diameter = 500 mm (1)(2) wxhxl (g) (3) (F) lt = lt = lt = (mm) H = 18.5 mm; SPQ 3.5 mm 5.0 mm SPQ 25.0 mm SPQ P0 = 12.7 mm 0.3 mm 1.0 mm 2.0 mm Pitch = 15.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm 0.010 18214 18414 18614 18934 0.012 18215 18415 18615 18935 5.0 x 11.0 x 17.5 1.0 1000 1000 1100 0.015 18216 18416 18616 18936 0.018 18217 18417 18617 18937 0.022 18218 18418 18618 18938 6.0 x 12.0 x 17.5 1.4 1000 1000 900 0.027 18219 18419 18619 18939 Pitch = 15.0 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.033 18221 18421 18621 18941 7.0 x 13.5 x 17.5 1.8 750 500 800 0.039 18222 18422 18622 18942 0.047 18223 18423 18623 18943 8.5 x 15.0 x 17.5 2.4 750 500 650 0.056 18224 18424 18624 18944 0.068 18225 18425 18625 18945 10.0 x 16.5 x 17.5 3.0 500 450 600 0.082 18226 18426 18626 18946 Pitch = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.10 18227 18427 18627 18947 8.5 x 18.0 x 26.0 3.8 200 250 450 0.12 18228 18428 18628 18948 0.15 18229 18429 18629 18949 10.0 x 19.5 x 26.0 6.8 200 200 350 0.18 18231 18431 18631 18951 Pitch = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm 0.22 11.0 x 21.0 x 31.0 7.4 18232 18432 100 18632 125 0.27 18233 18433 18633 13.0 x 23.0 x 31.0 9.2 100 125 0.33 18234 18434 18634 0.39 18235 18435 18635 15.0 x 25.0 x 31.5 12.3 100 125 0.47 18236 18436 18636 0.56 18237 18437 18637 18.0 x 28.0 x 31.5 16.1 100 100 0.68 18238 18438 18638 0.82 21.0 x 31.0 x 31.0 20.3 18239 18439 50 18639 75 Notes * SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to "Packaging Information" 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only Bent back pitch (only taped); C-tol. = 5 % CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING LOOSE IN BOX TAPED DIMENSIONS MASS C Short leads Long leads Reel diameter = 500 mm (1) wxhxl (3) (g) (F) lt = lt = lt = (mm) H = 16.0 mm; SPQ 3.5 mm 5.0 mm SPQ 25.0 mm SPQ P0 = 15.0 mm 0.3 mm 1.0 mm 2.0 mm Original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; dt = 0.60 0.06 mm 0.010 18814 0.012 18815 5.0 x 13.0 x 17.5 1.0 950 0.015 18816 0.018 18817 0.022 18818 6.0 x 14.0 x 17.5 1.4 800 0.027 18819 Original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; dt = 0.80 0.08 mm 0.033 18821 7.0 x 15.5 x 17.5 1.8 700 0.039 18822 0.047 18823 8.5 x 17.0 x 17.5 2.4 550 0.056 18824 0.068 18825 10.0 x 18.5 x 17.5 3.0 500 0.082 18826 Notes * SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to "Packaging Information" 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only www.vishay.com 388 For technical questions, contact: RFI@vishay.com Document Number: 28116 Revision: 23-Feb-11 MKP338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type APPROVALS SAFETY APPROVALS X1 VOLTAGE VALUE FILE NUMBERS EN 60384-14 (ENEC) 440 VAC 10 nF to 1 F FI 2008060 A1 (= IEC 60384-14 ed-3) UL1414 250 VAC 10 nF to 1 F E112471 440 VAC UL1283 10 nF to 100 nF E109565 UL1283 and (CSA-C22.2 No. 8) 440 VAC 100 nF to 1 F E109565 440 VAC CB-Test Certificate 10 nF to 1 F FI 5256 A1 The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom. (R) 16 MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to: "Packaging Information": www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: For pitches 15 mm capacitors shall be mechanically fixed by the leads For longer pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed Circuit Board The maximum space for length (Imax.), width (wmax.) and heigth (hmax. ) of film capacitors to take in account on the printed circuit board is shown in the drawings. For products with pitch 15 mm, w = l = 0.3 mm; h = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = W + Eccentricity Imax. = I + CBA116 hmax. = h + Seating plane SOLDERING For general soldering conditions and wave soldering profile, we refer to the application note: "Soldering Guidelines for Film Capacitors": www.vishay.com/doc?28171 Storage Temperature Storage temperature: Tstg = - 25 C to + 40 C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %. For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Document Number: 28116 Revision: 23-Feb-11 For technical questions, contact: RFI@vishay.com www.vishay.com 389 MKP338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type CHARACTERISTICS Capacitance as a function of ambient temperature (typical curve) 10 3 C/C (%) Dissipation Factor (x 10- 4) 4 2 Tangent of loss angle as a function of frequency (typical curve) typical 10 2 0 F =1 F C < 1 C F F < 20 n 0n C2 2 2 < F 7n nF 47 < C 4 F 10 n max. -2 101 -4 min. -6 10 - 50 0 50 Tamb (C) 100 Impedance as a function of frequency (typical curve) 0 1 10 10 2 10 3 10 4 f(Hz) 10 5 Resonant frequency as a function of capacitance (typical curve) 103 f (Mhz) Impedance () 102 102 10 47 10 101 nF 101 nF 0n F 47 0n F 10 00 nF 100 X1 100 10-1 10-1 10-2 104 5 10 10 6 7 10 f (Hz) 1 8 10 Max. RMS voltage as a function of frequency 100 1000 C (nF) 10 000 Max. RMS current as a function of frequency 103 AC current (mA) 104 AC voltage (V) 10 10 103 1000 nF 470 nF 102 100 nF 47 nF 101 10 nF 4.7 nF 100 1 nF 2 Tamb 105 C 101 101 www.vishay.com 390 102 103 104 f (Hz) 105 10-1 101 Tamb 105 C 102 For technical questions, contact: RFI@vishay.com 103 104 f (Hz) 105 Document Number: 28116 Revision: 23-Feb-11 MKP338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type Insulation resistance as a function of ambient temperature RC (s) 106 105 104 0 20 40 60 80 100 Tamb (C) APPLICATION NOTES For X1 electromagnetics interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum mains voltage of 440 VAC. For series impedance applications we refer to Application Note www.vishay.com/doc?28153 For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. The maximum ambient temperature must not exceed 105 C. Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 615 VDC and divided by the applied voltage. Document Number: 28116 Revision: 23-Feb-11 For technical questions, contact: RFI@vishay.com www.vishay.com 391 MKP338 1 X1 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type INSPECTION REQUIREMENTS General Notes: 1. Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, Publication IEC 60384-14 ed-3 and Specific Reference Data." Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters "General data" of this specification Initial measurements Capacitance Tangent of loss angle at 10 kHz 4.3 Robustness o terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 C 5 C Duration: 10 s 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance C/C| 5 % of the value measured initially Tangent of loss angle Increase of tan 0.008 Compared to values measured initially Insulation resistance As specified in section "Insulation Resistance" of this specification No visible damage SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle at 10 kHz 4.20 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min 0.5 min 4.6 Rapid change of temperature A = - 55 C B = + 105 C 5 cycles No visible damage Legible marking Duration t = 30 min www.vishay.com 392 For technical questions, contact: RFI@vishay.com Document Number: 28116 Revision: 23-Feb-11 MKP338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.6.1 4.7 Inspection Vibration Visual examination Mounting: See section "Mounting" of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s (whichever is less severe) Total duration 6 h No visible damage 4.7.2 Final inspection Visual examination No visible damage 4.9 Shock Mounting: See section "Mounting" for more information Pulse shape: half sine Acceleration: 490 m/s Duration of pulse: 11 ms 4.9.2 Final measurements Visual examination No visible damage Capacitance C/C| 5 % of the value measured initially Tangent of loss angle Increase of tan 0.008 Compared to values measured initially Insulation resistance As specified in section "Insulation Resistance" of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 105 C Duration: 16 h 4.11.3 Damp heat cyclic Test Db First cycle 4.11.4 Cold Temperature: - 55 C Duration: 2 h 4.11.5 Damp heat cyclic Test Db Remaining cycles 4.11.6 Final measurements Document Number: 28116 Revision: 23-Feb-11 Visual examination No visible damage Legible marking Capacitance C/C| 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan 0.008 Compared to values measured in 4.11.1. Voltage proof 1900 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification For technical questions, contact: RFI@vishay.com www.vishay.com 393 MKP338 1 X1 Vishay BCcomponents SUB-CLAUSE NUMBER AND TEST Interference Suppression Film Capacitors MKP Radial Potted Type CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C2 4.12 Damp heat steady state 56 days, 40 C, 90 % to 95 % RH No load 4.12.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan 0.008 Compared to values measured in 4.12.1. Voltage proof 1900 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle at 10 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X1: 4 kV Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.25 x URAC at 105 C Once in every hour the voltage is increased to 1000 VRMS for 0.1 s via resistor of 47 5 % 4.14.7 Final measurements No self healing breakdowns or flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan 0.008 Compared to values measured in 4.13.1. Voltage proof 1900 VDC; 1 min between terminations 2380 VAC; 1 min between terminations and case. No permanent breakdown or flash-over Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles Charged to 615 VDC Discharge resistance: 615 V DC R = --------------------------------------1.5 x C (dU/dt) 4.15.1 Initial measurements www.vishay.com 394 Capacitance Tangent of loss angle at 10 kHz For technical questions, contact: RFI@vishay.com Document Number: 28116 Revision: 23-Feb-11 MKP338 1 X1 Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.15.3 Final measurements Capacitance |C/C| 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan 0.008 Compared to values measured in 4.15.1. Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification Resonance frequency 0.9 times value as specified in section "Resonant Frequency" of this specification Bore of gas jet: O 0.5 mm Fuel: Butane Test duration for actual volume V in mm: V 250: 10 s 250 < V 500: 20 s 500 < V 1750: 30 s V > 1750: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C5 4.16 Radio frequency characteristic SUB-GROUP C6 4.17 Passive flammability Class B 12 mm ~ 8 mm 45.0 SUB-GROUP C7 4.18 Active flammability Document Number: 28116 Revision: 23-Feb-11 20 cycles of 4 kV discharges on the test capacitor connected to URAC For technical questions, contact: RFI@vishay.com The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. www.vishay.com 395 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1