PRODUCT FAMILY DATA SHEET
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-D118 REV 8A
Cree® XLamp® CXB1512 LED
PRODUCT DESCRIPTION
The XLamp® CXB1512 LED Array is a
member of the second generation of
the CXA family that delivers up to 30%
higher efcacy and up to 20% higher
lumens than the rst generation in the
same LES. The higher performance
second generation CXA LED Arrays
provide a drop-in performance upgrade
to existing CXA LED designs to shorten
product development time. In addition,
the CXB LEDs also allow lighting
manufacturers to achieve the same
or better performance with a smaller
LES, enabling a smaller, more impactful
luminaire. Available in 2-step, 3-step and
5-step EasyWhite® bins and 2-step and
3-step Premium Color bins, the CXB1512
LED delivers high lumen output and high
efcacy in a single, easy‑to‑use package
that eliminates the need for reow
soldering.
The CX Family LED Design Guide
provides basic information on the
requirements to use the CXB1512 LED
successfully in luminaire designs.
FEATURES
• 9-mm optical source
• Mechanical and optical design
consistent with other CXA15 and
CXB15 LEDs
• Available in 70-, 80-, 90- and
95-minimum CRI options
• Cree EasyWhite® 2-, 3- and 5-step
binning
• Premium Color 2- and 3-step binning
• Forward voltage options: 18-V class
& 36-V class
• 85°C binning and characterization
• Extremely uniform color over viewing
angle
• Top-side solder connections
• Thermocouple attach point
• NEMA SSL‑3 2011 standard ux bins
• RoHS and REACh compliant
• UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ............................................2
Operating Limits ..........................................3
Flux Characteristics, EasyWhite® Order
Codes and Bins ‑ 18V .................................4
Flux Characteristics, Premium Color
Order Codes and Bins ‑ 18V ......................7
Flux Characteristics, EasyWhite® Order
Codes and Bins ‑ 36V .................................8
Flux Characteristics, Premium Color
Order Codes and Bins ‑ 36V ................... 11
Relative Spectral Power Distribution,
EasyWhite® .............................................. 12
Relative Spectral Power Distribution,
Premium Color ......................................... 13
Electrical Characteristics ......................... 14
Relative Luminous Flux ............................ 15
Typical Spatial Distribution ...................... 17
Performance Groups - Brightness .......... 17
EasyWhite® Performance Groups -
Chromaticity ............................................. 18
Premium Color Performance Groups -
Chromaticity ............................................. 19
Cree EasyWhite® Bins Plotted on the
1931 CIE Color Space .............................. 20
Cree Premium Color Bins Plotted on the
1931 CIE Color Space .............................. 21
Bin and Order Code Formats ................... 23
Mechanical Dimensions .......................... 23
Thermal Design ........................................ 24
Notes ........................................................ 26
Packaging ................................................. 27
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLAMP® CXB1512 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Viewing angle (FWHM) degrees 115
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current (18V) mA 1200*
DC forward current (36V) mA 600*
Reverse current (18V, 36V) mA 0.1
Forward voltage (18V, @ 700mA, 85°C) V 17.2 19
Forward voltage (36V, @ 350mA, 85°C) V 34.3 38
* Refer to the Operating Limits section.
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLAMP® CXB1512 LED
OPERATING LIMITS
The maximum current rating of the CXB1512 depends on the case temperature (Tc) when the LED has reached thermal equilibrium under
steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface
material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section
on page 23 for the location of the Tc measurement point.
Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree recommends a
maximum LES temperature of 135°C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 24 for more
information on LES temperature measurement.
CXB1512 - 18 V Standard
0
200
400
600
800
1000
1200
1400
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
18 V
90 °C, 1200 mA
125 °C,
498 mA
CXB1512 - 36 V Standard
0
100
200
300
400
500
600
700
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
36 V
90 °C, 600 mA
125 °C,
249 mA
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLAMP® CXB1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
• Cree XLamp CXB1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
** Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18V (IF = 700mA, TJ=85°C)
The following table provides order codes for XLamp CXB1512 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 23).
Nominal
CCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code Group Order Code Group Order Code
6500K
70 ---
N4 1710 1871
65E
CXB1512-0000-
000F0BN465E
P2 1830 2002 CXB1512-0000-
000F0BP265E
P4 1965 2150 CXB1512-0000-
000F0BP465E
80 ---
N2 1590 1739
65E
CXB1512-0000-
000F0HN265E
N4 1710 1871 CXB1512-0000-
000F0HN465E
5700K
70 ---
N4 1710 1871
57E
CXB1512-0000-
000F0BN457E
P2 1830 2002 CXB1512-0000-
000F0BP257E
P4 1965 2150 CXB1512-0000-
000F0BP457E
80 ---
N2 1590 1739
57E
CXB1512-0000-
000F0HN257E
N4 1710 1871 CXB1512-0000-
000F0HN457E
5000K
70 ---
N4 1710 1871
50E
CXB1512-0000-
000F0BN450E
P2 1830 2002 CXB1512-0000-
000F0BP250E
P4 1965 2150 CXB1512-0000-
000F0BP450E
80 ---
N2 1590 1739
50G
CXB1512-0000-
000F0HN250G 50E
CXB1512-0000-
000F0HN250E
N4 1710 1871 CXB1512-0000-
000F0HN450G
CXB1512-0000-
000F0HN450E
90 92
M4 1485 1625
50G
CXB1512-0000-
000F0UM450G
N2 1590 1739 CXB1512-0000-
000F0UN250G
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLAMP® CXB1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
• Cree XLamp CXB1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
** Flux values @ 25°C are calculated and for reference only.
Nominal
CCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code Group Order Code Group Order Code
4000K
70 ---
N4 1710 1871
40E
CXB1512-0000-
000F0BN440E
P2 1830 2002 CXB1512-0000-
000F0BP240E
P4 1965 2150 CXB1512-0000-
000F0BP440E
80 ---
N2 1590 1739
40H
CXB1512-0000-
000F0HN240H
40G
CXB1512-0000-
000F0HN240G
N4 1710 1871 CXB1512-0000-
000F0HN440H
CXB1512-0000-
000F0HN440G
P2 1830 2002 CXB1512-0000-
000F0HP240H
CXB1512-0000-
000F0HP240G
90 92
M2 1380 1510
40H
CXB1512-0000-
000F0UM240H
40G
CXB1512-0000-
000F0UM240G
M4 1485 1625 CXB1512-0000-
000F0UM440H
CXB1512-0000-
000F0UM440G
N2 1590 1739 CXB1512-0000-
000F0UN240H
CXB1512-0000-
000F0UN240G
3500K
80 ---
N2 1590 1739
35H
CXB1512-0000-
000F0HN235H
35G
CXB1512-0000-
000F0HN235G
N4 1710 1871 CXB1512-0000-
000F0HN435H
CXB1512-0000-
000F0HN435G
P2 1830 2002 CXB1512-0000-
000F0HP235H
CXB1512-0000-
000F0HP235G
90 92
K4 1290 1411
35H
CXB1512-0000-
000F0UK435H
35G
CXB1512-0000-
000F0UK435G
M2 1380 1510 CXB1512-0000-
000F0UM235H
CXB1512-0000-
000F0UM235G
M4 1485 1625 CXB1512-0000-
000F0UM435H
CXB1512-0000-
000F0UM435G
3000K
80 ---
M4 1485 1625
30H
CXB1512-0000-
000F0HM430H
30G
CXB1512-0000-
000F0HM430G
N2 1590 1739 CXB1512-0000-
000F0HN230H
CXB1512-0000-
000F0HN230G
N4 1710 1871 CXB1512-0000-
000F0HN430H
CXB1512-0000-
000F0HN430G
90 92
K4 1290 1411
30H
CXB1512-0000-
000F0UK430H
30G
CXB1512-0000-
000F0UK430G
M2 1380 1510 CXB1512-0000-
000F0UM230H
CXB1512-0000-
000F0UM230G
M4 1485 1625 CXB1512-0000-
000F0UM430H
CXB1512-0000-
000F0UM430G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18V (IF = 700mA, TJ=85°C) - CONTINUED
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLAMP® CXB1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
• Cree XLamp CXB1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
** Flux values @ 25°C are calculated and for reference only.
Nominal
CCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code Group Order Code Group Order Code
2700K
80 ---
M4 1485 1625
27H
CXB1512-0000-
000F0HM427H 27G
CXB1512-0000-
000F0HM427G
N2 1590 1739 CXB1512-0000-
000F0HN227H
CXB1512-0000-
000F0HN227G
90 92
K2 1200 1313
27H
CXB1512-0000-
000F0UK227H
27G
CXB1512-0000-
000F0UK227G
K4 1290 1411 CXB1512-0000-
000F0UK427H
CXB1512-0000-
000F0UK427G
M2 1380 1510 CXB1512-0000-
000F0UM227H
CXB1512-0000-
000F0UM227G
2200K 80 --- M2 1380 1510 22G CXB1512-0000-
000F0HM222G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18V (IF = 700mA, TJ=85°C) - CONTINUED
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLAMP® CXB1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
• Cree XLamp CXB1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
** Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS, PREMIUM COLOR ORDER CODES AND BINS - 18V (IF = 700mA, TJ=85°C)
Fidelity
Nominal
CCT
CRI* Minimum Luminous Flux Typical
Luminous
Flux (lm)
@ 85°C
2-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code
4000K 95 98 K4 1290 1411 1407 L5A CXB1512‑0000‑000F0ZK4L5A
3500K 95 98 K2 1200 1313 1355 35H CXB1512‑0000‑000F0ZK235H
3000K 95 98 K2 1200 1313 1303 30H CXB1512‑0000‑000F0ZK230H
2700K 95 98 J4 1120 1225 1229 27H CXB1512-0000-000F0ZJ427H
Specialty
Nominal
CCT
CRI Minimum Luminous Flux Typical
Luminous
Flux (lm)
@ 85°C
2-Step 3-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code Group Order Code Group Order Code
3100K 90 92
K4 1290 1411
1502 31Q
CXB1512-0000-
000F0UK431Q
M2 1380 1510 CXB1512-0000-
000F0UM231Q
3000K
80 --- M4 1485 1625 1746 L7B CXB1512-0000-
000F0HM4L7B
90 92
J4 1120 1225
1502 30Q 30U
CXB1512-0000-
000F0UJ430U
K2 1200 1313 CXB1512-0000-
000F0UK230Q
CXB1512-0000-
000F0UK230U
K4 1290 1411 CXB1512-0000-
000F0UK430Q
CXB1512-0000-
000F0UK430U
95 98 J4 1120 1225 1303 L7C CXB1512-0000-
000F0ZJ4L7C
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLAMP® CXB1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
• Cree XLamp CXB1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
** Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36V (IF = 350mA, TJ=85°C)
The following table provides order codes for XLamp CXB1512 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 23).
Nominal
CCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code Group Order Code Group Order Code
6500K
70 ---
N4 1710 1871
65E
CXB1512-0000-
000N0BN465E
P2 1830 2002 CXB1512-0000-
000N0BP265E
P4 1965 2150 CXB1512-0000-
000N0BP465E
80 ---
N2 1590 1739
65E
CXB1512-0000-
000N0HN265E
N4 1710 1871 CXB1512-0000-
000N0HN465E
5700K
70 ---
N4 1710 1871
57E
CXB1512-0000-
000N0BN457E
P2 1830 2002 CXB1512-0000-
000N0BP257E
P4 1965 2150 CXB1512-0000-
000N0BP457E
80 ---
N2 1590 1739
57E
CXB1512-0000-
000N0HN257E
N4 1710 1871 CXB1512-0000-
000N0HN457E
5000K
70 ---
N4 1710 1871
50E
CXB1512-0000-
000N0BN450E
P2 1830 2002 CXB1512-0000-
000N0BP250E
P4 1965 2150 CXB1512-0000-
000N0BP450E
80 ---
N2 1590 1739
50G
CXB1512-0000-
000N0HN250G 50E
CXB1512-0000-
000N0HN250E
N4 1710 1871 CXB1512-0000-
000N0HN450G
CXB1512-0000-
000N0HN450E
90 92
M4 1485 1625
50G
CXB1512-0000-
000N0UM450G
N2 1590 1739 CXB1512-0000-
000N0UN250G
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLAMP® CXB1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
• Cree XLamp CXB1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
** Flux values @ 25°C are calculated and for reference only.
Nominal
CCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code Group Order Code Group Order Code
4000K
70 ---
N4 1710 1871
40E
CXB1512-0000-
000N0BN440E
P2 1830 2002 CXB1512-0000-
000N0BP240E
P4 1965 2150 CXB1512-0000-
000N0BP440E
80 ---
N2 1590 1739
40H
CXB1512-0000-
000N0HN240H
40G
CXB1512-0000-
000N0HN240G
N4 1710 1871 CXB1512-0000-
000N0HN440H
CXB1512-0000-
000N0HN440G
P2 1830 2002 CXB1512-0000-
000N0HP240H
CXB1512-0000-
000N0HP240G
90 92
M2 1380 1510
40H
CXB1512-0000-
000N0UM240H
40G
CXB1512-0000-
000N0UM240G
M4 1485 1625 CXB1512-0000-
000N0UM440H
CXB1512-0000-
000N0UM440G
N2 1590 1739 CXB1512-0000-
000N0UN240H
CXB1512-0000-
000N0UN240G
3500K
80 ---
N2 1590 1739
35H
CXB1512-0000-
000N0HN235H
35G
CXB1512-0000-
000N0HN235G
N4 1710 1871 CXB1512-0000-
000N0HN435H
CXB1512-0000-
000N0HN435G
P2 1830 2002 CXB1512-0000-
000N0HP235H
CXB1512-0000-
000N0HP235G
90 92
K4 1290 1411
35H
CXB1512-0000-
000N0UK435H
35G
CXB1512-0000-
000N0UK435G
M2 1380 1510 CXB1512-0000-
000N0UM235H
CXB1512-0000-
000N0UM235G
M4 1485 1625 CXB1512-0000-
000N0UM435H
CXB1512-0000-
000N0UM435G
3000K
80 ---
M4 1485 1625
30H
CXB1512-0000-
000N0HM430H
30G
CXB1512-0000-
000N0HM430G
N2 1590 1739 CXB1512-0000-
000N0HN230H
CXB1512-0000-
000N0HN230G
N4 1710 1871 CXB1512-0000-
000N0HN430H
CXB1512-0000-
000N0HN430G
90 92
K4 1290 1411
30H
CXB1512-0000-
000N0UK430H
30G
CXB1512-0000-
000N0UK430G
M2 1380 1510 CXB1512-0000-
000N0UM230H
CXB1512-0000-
000N0UM230G
M4 1485 1625 CXB1512-0000-
000N0UM430H
CXB1512-0000-
000N0UM430G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36V (IF = 350mA, TJ=85°C) - CONTINUED
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLAMP® CXB1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
• Cree XLamp CXB1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
** Flux values @ 25°C are calculated and for reference only.
Nominal
CCT
CRI* Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code Group Order Code Group Order Code
2700K
80 ---
M4 1485 1625
27H
CXB1512-0000-
000N0HM427H 27G
CXB1512-0000-
000N0HM427G
N2 1590 1739 CXB1512-0000-
000N0HN227H
CXB1512-0000-
000N0HN227G
90 92
K2 1200 1313
27H
CXB1512-0000-
000N0UK227H
27G
CXB1512-0000-
000N0UK227G
K4 1290 1411 CXB1512-0000-
000N0UK427H
CXB1512-0000-
000N0UK427G
M2 1380 1510 CXB1512-0000-
000N0UM227H
CXB1512-0000-
000N0UM227G
2200K 80 --- M2 1380 1510 22G CXB1512-0000-
000N0HM222G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36V (IF = 350mA, TJ=85°C) - CONTINUED
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLAMP® CXB1512 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
• Cree XLamp CXB1512 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
** Flux values @ 25°C are calculated and for reference only.
FLUX CHARACTERISTICS, PREMIUM COLOR ORDER CODES AND BINS - 36V (IF = 350mA, TJ=85°C)
Fidelity
Nominal
CCT
CRI* Minimum Luminous Flux Typical
Luminous
Flux (lm)
@ 85°C
2-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code
4000K 95 98 K4 1290 1411 1407 L5A CXB1512‑0000‑000N0ZK4L5A
3500K 95 98 K2 1200 1313 1355 35H CXB1512‑0000‑000N0ZK235H
3000K 95 98 K2 1200 1313 1303 30H CXB1512‑0000‑000N0ZK230H
2700K 95 98 J4 1120 1225 1229 27H CXB1512-0000-000N0ZJ427H
Specialty
Nominal
CCT
CRI Minimum Luminous Flux Typical
Luminous
Flux (lm)
@ 85°C
2-Step 3-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C** Group Order Code Group Order Code Group Order Code
3100K 90 92
K4 1290 1411
1502 31Q
CXB1512-0000-
000N0UK431Q
M2 1380 1510 CXB1512-0000-
000N0UM231Q
3000K
80 --- M4 1485 1625 1746 L7B CXB1512-0000-
000N0HM4L7B
90 92
J4 1120 1225
1502 30Q 30U
CXB1512-0000-
000N0UJ430U
K2 1200 1313 CXB1512-0000-
000N0UK230Q
CXB1512-0000-
000N0UK230U
K4 1290 1411 CXB1512-0000-
000N0UK430Q
CXB1512-0000-
000N0UK430U
95 98 J4 1120 1225 1303 L7C CXB1512-0000-
000N0ZJ4L7C
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLAMP® CXB1512 LED
RELATIVE SPECTRAL POWER DISTRIBUTION, EASYWHITE®
The following graphs are the result of a series of pulsed measurements at 700mA for the 18‑V CXB1512 LED and 350mA for the 36‑V
CXB1512 LED and TJ = 85°C.
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
5000 K, 70 CRI
4000 K, 70 CRI
3000 K, 80 CRI
3000 K, 90 CRI
2200 K, 80 CRI
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLAMP® CXB1512 LED
RELATIVE SPECTRAL POWER DISTRIBUTION, PREMIUM COLOR
The following graphs are the result of a series of pulsed measurements at 700mA for the 18‑V CXB1512 LED and 350mA for the 36‑V
CXB1512 LED and TJ = 85°C
Fidelity
Specialty
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
4000 K, Z CRI
3500 K, Z CRI
3000 K, Z CRI
2700 K, Z CRI
Relative Spectral Power Distribution
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
31Q, 3100 K, 90 CRI
30Q, 3000 K, 90 CRI
30U, 3000 K, 90 CRI
L7B, 3000 K 80 CRI
L7C, 3000 K, Z CRI
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLAMP® CXB1512 LED
ELECTRICAL CHARACTERISTICS
The following graphs are the result of a series of steady-state measurements.
15.5
16.0
16.5
17.0
17.5
18.0
18.5
200 300 400 500 600 700 800 900 1000 1100 1200
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
18 V
31.0
32.0
33.0
34.0
35.0
36.0
37.0
100 150 200 250 300 350 400 450 500 550 600
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
36 V
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLAMP® CXB1512 LED
RELATIVE LUMINOUS FLUX
The relative luminous ux values provided below are the ratio of:
• Measurements of CXB1512 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 700mA at TJ = 85°C for the 18‑V CXB1512 LED.
Using the 18‑V CXB1512 LED as an example, at steady‑state operation of Tc = 25°C, IF = 800mA, the relative luminous ux ratio is 120%
in the chart below. A CXB1512 LED that measures 1290lm during binning will deliver 1548lm (1290 * 1.2) at steady‑state operation of
Tc = 25°C, IF = 800mA.
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200 300 400 500 600 700 800 900 1000 1100 1200
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
18 V
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLAMP® CXB1512 LED
RELATIVE LUMINOUS FLUX - CONTINUED
The relative luminous ux values provided below are the ratio of:
• Measurements of CXB1512 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 350mA at TJ = 85°C for the 36‑V CXB1512 LED.
Using the 36‑V CXB1512 LED as an example, at steady‑state operation of Tc = 25°C, IF = 400mA, the relative luminous ux ratio is 120%
in the chart below. A CXB1512 LED that measures 1290lm during binning will deliver 1548lm (1290 * 1.2) at steady‑state operation of
Tc = 25°C, IF = 400mA.
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
100 150 200 250 300 350 400 450 500 550 600
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
36 V
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLAMP® CXB1512 LED
TYPICAL SPATIAL DISTRIBUTION
PERFORMANCE GROUPS - BRIGHTNESS (18V, IF = 700mA; 36V, IF = 350mA, TJ = 85°C)
XLamp CXB1512 LEDs are tested for luminous ux and placed into one of the following bins.
Group Code Minimum Luminous Flux Maximum Luminous Flux
J4 1120 1200
K2 1200 1290
K4 1290 1380
M2 1380 1485
M4 1485 1590
N2 1590 1710
N4 1710 1830
P2 1830 1965
P4 1965 2100
Q2 2100 2260
Far Field
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLAMP® CXB1512 LED
EASYWHITE® PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C)
XLamp CXB1512 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Code CCT x y
40H 4000K
0.3777 0.3739
0.3797 0.3816
0.3861 0.3855
0.3838 0.3777
35H 3500K
0.4022 0.3858
0.4053 0.3942
0.4125 0.3977
0.4091 0.3891
30H 3000K
0.4287 0.3975
0.4328 0.4064
0.4390 0.4086
0.4347 0.3996
27H 2700K
0.4524 0.4048
0.4574 0.4140
0.4633 0.4154
0.4581 0.4062
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
50G 5000K 0.3447 0.3553 0.00840 0.00312 65.0
40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7
35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0
30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2
27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5
22G 2200K 0.5066 0.4158 0.00980 0.00480 45.5
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
65E 6500K 0.3123 0.3282 0.01110 0.00550 61.0
57E 5700K 0.3287 0.3417 0.01230 0.00600 72.0
50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0
40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLAMP® CXB1512 LED
PREMIUM COLOR PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C)
XLamp CXB1512 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
Fidelity
EasyWhite Color Temperatures – 2-Step
Code CCT x y
L5A 4000K
0.3764 0.3711
0.3784 0.3787
0.3847 0.3826
0.3825 0.3748
35H 3500K
0.4022 0.3858
0.4053 0.3942
0.4125 0.3977
0.4091 0.3891
30H 3000K
0.4287 0.3975
0.4328 0.4064
0.4390 0.4086
0.4347 0.3996
27H 2700K
0.4524 0.4048
0.4574 0.4140
0.4633 0.4154
0.4581 0.4062
Specialty
EasyWhite Color Temperatures – 2-Step
Code CCT x y
L7B 3000K
0.4263 0.3848
0.4296 0.3916
0.4361 0.3938
0.4326 0.3868
L7C 3000K
0.4192 0.3754
0.4224 0.3823
0.4291 0.3847
0.4257 0.3777
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
31Q 3100K 0.4236 0.3888 0.00848 0.00455 50.3
30Q 3000K 0.4305 0.3935 0.00834 0.00408 53.2
30U 3000K 0.4274 0.3837 0.00834 0.00408 53.2
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLAMP® CXB1512 LED
CREE EASYWHITE® BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C)
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
6500 K
7000K
2450 K 2200 K
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 5-step
EasyWhite 3-step
EasyWhite 2-step
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLAMP® CXB1512 LED
CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C)
Fidelity (2-step)
2700K
3000K
3500K
4000K
4500K
L5A
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
ANSI C78.377 Quadrangle
35H
30H
27H
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLAMP® CXB1512 LED
CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C) - CONTINUED
Speciality (2-step)
Speciality (3-step)
3000 K
3500 K
L7B
L7C
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.41
0.42
0.43
0.44
0.45
0.46
CCy
CCx
ANSI C78.377 Quadrangle
3000K
3500K
30Q
30U
31Q
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.41
0.42
0.43
0.44
0.45
0.46
CCy
CCx
ANSI C78.377 Quadrangle
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLAMP® CXB1512 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes are congured as follows:
Order Code Bin Code
SSSSSCC-HHHH-HHHGGRNNNNN
Series = CXB15
Internal code
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Z = 95 CRI minimum
Kit code
Vf class:
F0 = 18-V class
N0 = 36-V class
Performance class
SSSSSCC-WWW-FF-GGR-AAAAA
Series = CXB15
Chromaticity bin
Vf class:
F0 = 18-V class
N0 = 36-V class
Internal code
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Z = 95 CRI minimum
Flux bin
Performance class
MECHANICAL DIMENSIONS
Dimensions are in mm.
Tolerances unless otherwise
specied: +.13
x° +1°
Meaning of B1512X
B1512F = 18-V CXB1512
B1512N = 36-V CXB1512
B1512X
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLAMP® CXB1512 LED
THERMAL DESIGN
The CXB family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction
temperatures (TJ). Cree has intentionally removed junction‑temperature‑based operating limits and replaced the commonplace maximum
TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to
ensure that the CXB LED is being operated within its designed limits. LES temperature measurement provides additional verication of
good thermal design. Please refer to page 3 for the Operating Limit specications.
There is no need to calculate for TJ inside the package, as the thermal management design process, specically from TSP to ambient
(Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to
the Thermal Management application note. For CXB soldering recommendations and more information on thermal interface materials
(TIM), LES temperature measurement, and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling
document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXB LEDs successfully
in luminaire designs.
To keep the CXB1512 LED at or below the maximum rated Tc, the case to ambient temperature
thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following
graphs, depending on the operating environment. The y-axis in the graphs is a base 10 logarithmic
scale.
As the gure at right shows, the R_c‑a value is the sum of the thermal resistance of the TIM (R_tim)
plus the thermal resistance of the heat sink (R_hs).
R_j-c
Tc
R_tim
R_hs
Ta
R_j-c
Tc
R_c-a
Ta
CXB1512 - 18 V
0.01
0.10
1.00
10.00
100.00
200 300 400 500 600 700 800 900 1000 1100 1200
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
18 V
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLAMP® CXB1512 LED
CXB1512 - 37 V
0.01
0.10
1.00
10.00
100.00
100 200 300 400 500 600
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
36 V
THERMAL DESIGN - CONTINUED
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLAMP® CXB1512 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Pre-Release Qualication Testing
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long‑term reliability for XLamp
LEDs and details of Cree’s pre‑release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM‑80‑08 and TM‑21‑11 methods for collecting long‑term data and extrapolating LED lumen maintenance.
For information on the specic LM‑80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2015-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLAMP® CXB1512 LED
PACKAGING
Cree CXB1512 LEDs are packaged in trays of 20. Five trays are sealed in an anti‑static bag and placed inside a carton, for a total of 100
LEDs per carton. Each carton contains 100 LEDs from the same performance bin.
Dimensions are in inches.
Tolerances: +.13
x° +1°
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
LABEL WITH CREE
BIN CODE, QTY, LOT#
LABEL WITH CREE
BIN CODE, QTY, LOT#
BAG
LABEL WITH CREE
BIN CODE, QTY, LOT#
PATENT LABEL
IS LOCATED ON UNDERSIDE OF
CARTON
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
BAG
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER
PATENT LABEL IS LOCATED
ON UNDERSIDE OF CARTON
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
BAG
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER