3MTM DIN C-Form Socket .100" Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series C R ec e ON p h la T S c IN he e U d et b ED y 23 06 * Multi-pin count socket for VME, Multibus II, and VXI backpanels * Press-fit or solder tail terminals for PCB * Expanded pin counts * Optional retention clips * Mates with C-form and R-form plugs * See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: October 28, 2008 Physical TS-1131-D Sheet 1 of 4 Insulation: Material: Glass Filled Polyester (PCT) Flammability: UL94V-0 Color: Gray or Black Contact: Material: Copper Alloy Plating: Underplating: 50 " [ 1.27 m ] Min. Nickel Wiping Area: (See Ordering Information) Termination Area: (See Ordering Information) Marking: Part Number and Date Code IS Electrical D Contact Resistance: Current Rating: Insulation Resistance: Withstanding Voltage: 20 m Max. 3.0 A @ 30C T-rise above ambient 1 x 103 M min. at 500 VDC 1 x 103 VAC for 1 minute Environmental T Temperature Rating: -55C to +125C Process Temperature Rating: 260C (per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN C-Form Socket .100" Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series A POSITION A1 D B 0.100 2.54 TYP. 0.230 5.84 0.335 8.51 0.417 10.59 0.039 .99 PRESS-FIT OR SOLDER TAIL 0.252 6.40 C R ec e ON p h la T S c IN he e U d et b ED y 23 06 0.457 11.61 0.024 X 0.015 [.61 X .38 ] 0.100 2.54 TYP. C C TAIL LENGTH 0.024 .61 0.100 2.54 TYP. E 0.150 3.80 Inch [mm] 0.160 4.06 Au FINISH Tolerance Unless Noted .0 Inch .1 .00 .000 .01 .005 [ ] Dimensions for Reference only Feed/Thru Wire Strap W, PW1 and PW2 with RR and GG30 Finish (Au both ends) D IS Ordering Information DIN-XXX CS X-XXX-XXXX Contact Quantity See Table 1 T Contact Loading: A = A Row only B = Rows A & C Filled C = Rows A, B, & C Filled D = Rows A & B Filled E = B Row only Plating and Insulating Color Options: See Table 3 Termination Options: See table 2 TS-1131-D Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN C-Form Socket .100" Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series Table 1 Load Pattern A B D E 016 032 048 32 016 032 064 096 064 032 040 080 120 080 040 050 100 150 100 050 A B C D E A B C D E A B C D E A B C D E 2.140 [54.36] 2.140 [54.36] 2.140 [54.36] 2.140 [54.36] 2.140 [54.36] 3.740 [95.00] 3.740 [95.00] 3.740 [95.00] 3.740 [95.00] 3.740 [95.00] 4.540 [115.32] 4.540 [115.32] 4.540 [115.32] 4.540 [115.32] 4.540 [115.32] 5.540 [140.72] 5.540 [140.72] 5.540 [140.72] 5.540 [140.72] 5.540 [140.72] 1.746 [44.35] 1.746 [44.35] 1.746 [44.35] 1.746 [44.35] 1.746 [44.35] 3.346 [84.99] 3.346 [84.99] 3.346 [84.99] 3.346 [84.99] 3.346 [84.99] 4.146 [105.31] 4.146 [105.31] 4.146 [105.31] 4.146 [105.31] 4.146 [105.31] 5.146 [130.71] 5.146 [130.71] 5.146 [130.71] 5.146 [130.71] 5.146 [130.71] 1.943 [49.35] 1.943 [49.35] 1.943 [49.35] 1.943 [49.35] 1.943 [49.35] 3.543 [89.99] 3.543 [89.99] 3.543 [89.99] 3.543 [89.99] 3.543 [89.99] 4.343 [110.31] 4.343 [110.31] 4.343 [110.31] 4.343 [110.31] 4.343 [110.31] 5.343 [135.71] 5.343 [135.71] 5.343 [135.71] 5.343 [135.71] 5.343 [135.71] 1.500 [38.10] 1.500 [38.10] 1.500 [38.10] 1.500 [38.10] 1.500 [38.10] 3.100 [78.74] 3.100 [78.74] 3.100 [78.74] 3.100 [78.74] 3.100 [78.74] 3.900 [99.06] 3.900 [99.06] 3.900 [99.06] 3.900 [99.06] 3.900 [99.06] 4.900 [124.46] 4.900 [124.46] 4.900 [124.46] 4.900 [124.46] 4.900 [124.46] C R ec e ON p h la T S c IN he e U d et b ED y 23 06 Contact Quantity Table 2 SOLDER TERMINATION OPTION No DIM "C" in (mm) Comments R1L R3L S1 contact thickness (solder tail) = 25mil S1L contact thickness (solder tail) =14mil S3L W 0.157 (3.99) 0.090 (2.29) 0.157 (3.99) 0.157 (3.99) 0.090 (2.29) 0.512 (13.00) with retention clips with retention clips no retention clips no retention clips no retention clips wire wrap PRESS-FIT TERMINATION OPTION No IS PSL PW1 PW2 PS D TG30 TR RR GG30 MH Insulator Color Table 3 Press-Fit Termiantions Solder Tail Terminations Plating Composition Gray (RIA E2 & C2 apply) (RIA E3 & C2 apply) 0.76 m [30 "] Min. Au Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over Gray (RIA E2 & C2 apply) (RIA E3 & C2 apply) 0.08 m [3 "] Min. Au Contact Area 0.18 m [7 "] Min. PdNi Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over Gray (RIA E2 & C2 apply) N/A 0.08 m [3 "] Min. Au over 0.18 m [7 "] Min. PdNi Contact Area (each end) 2.54 m [100 "] Min. SnPb Term. Area 1.27 m [50 "] Min. Ni all over Gray (RIA E2 & C2 apply) N/A 0.76 m [30 "] Min. Au Contact Area (each end) 2.54 m [100 "] Min. SnPb Term. Area 1.27 m [50 "] Min. Ni all over Black (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.76 m [30 "] Min. Au Contact Area 5.08 m [200 "] Min. Reflowed Matte Whisker Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over T Plating Suffix 0.189 (4.80) 0.512 (13.00) 0.669 (16.99) 0.236 (5.99) HS Black (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.08 m [3 "] Min. Au over 0.18 m [7 "] Min. PdNi Contact Area 5.08 m [200 "] Min. Reflowed Matte Whisker Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over KT Black (RIA E1 & C1 apply) (RIA E1 & C1 apply) 0.25 m [10 "] Min. Au Contact Area 5.08 m [200 "] Min. Reflowed Matte Whisker Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ TS-1131-D Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN C-Form Socket .100" Standard Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series -C- D E 0.012 .30 C B A -B0.200 5.08 2 0.110 2.79 X C R ec e ON p h la T S c IN he e U d et b ED y 23 06 1 O lO 0.100 2.54 0.100 TYP. 2.54 O F 0.100 2.54 PLATED THROUGH- HOLE 0.006 M A B C lO -A- 0.004 M A B C RECOMMENDED MOUNTING HOLE PATTERN HOLE PLATING TABLE For TG, TR, RR (Press-Fit Leads) HOLE DRILLED HOLE DIA. in (mm) "F" Cu THICKNESS in (mm) SnPb THICKNESS in (m) FINISHED DIA. in (mm) 0.037 - 0.043 (0.94 - 1.09) HOLE PLATING TABLE For TG, TR, RR (Solder Tail Leads) HOLE "F" DRILLED HOLE DIA. in (mm) IS "F" Cu THICKNESS in (mm) SnPb THICKNESS in (m) FINISHED DIA. in (mm) 0.041 - 0.049 (1.04 - 1.24) HOLE PLATING TABLE For MH, HS and KT (Press-Fit Leads) DRILLED HOLE DIA. in (mm) Cu THICKNESS in (mm) Immersion Whisker Mitigating Matte Sn Thickness in (m) FINISHED DIA. in (mm) 0.0425-0.044 (1.080-1.118) #57 OR 1.10mm TWIST DRILL 0.0010 - 0.0020 (0.025 0.045) 20 - 100 (0.508 - 2.54) 0.037 - 0.043 (0.94 - 1.09) D HOLE HOLE PLATING TABLE For MH, HS, and KT (Solder Tail Leads) "F" DRILLED HOLE DIA. in (mm) T HOLE Cu THICKNESS in (mm) Immersion Matte Sn Thickness in (m) FINISHED DIA. in (mm) 0.041 - 0.049 (1.04 - 1.24) TS-1131-D Sheet 4 of 4 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS C R ec e ON p h la T S c IN he e U d et b ED y 23 06 Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. IS Appendix E3: European Union RoHS D Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. T In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, 2008. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-E Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. C R ec e ON p h la T S c IN he e U d et b ED y 23 06 In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS D IS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. T The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-E Appendix C3: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. D IS C R ec e ON p h la T S c IN he e U d et b ED y 23 06 The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Important Notice T All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2008. All rights reserved. RIA-2217A-E 3M is a trademark of 3M Company.