Toggle Switches Sub-Miniature - Sealed Specifications: Contact Rating Mechanical Life Contact Resistance Minimum Insulation Resistance Dielectric Strength Operating Temperature Materials: Case and Bushing Actuator Switch Support Contacts/Terminals Pole Option M2RE : 0.4 volt-amps (VA) maximum at 20V maximum (AC or DC). : 30,000 make-and-break cycles. : 20m maximum initial at 2 to 4V dc. 100mA for both silver and gold plated contacts. : 1,000M. : 1,000VRMS at sea level. : -30C to 85C. : : : : Glass filled nylon 66, heat stabilized. Brass, chrome plated, internal, O-ring seal. Standard for all actuators. Brass, tin plated. Copper alloy, with gold plated. DPDT Dimensions : Millimetres (Inches) Page 1 21/03/08 V1.1 Toggle Switches Sub-Miniature - Sealed Pole Option M6RE SPDT PCB Mounting Section A -A Terminal Numbers for Reference Only Dimensions : Millimetres (Inches) DPDT PCB Mounting Section A -A Terminal Numbers for Reference Only M7RE Dimensions : Millimetres (Inches) SPDT PCB Mounting Section A -A Terminal Numbers for Reference Only Page 2 Dimensions : Millimetres (Inches) 21/03/08 V1.1 Toggle Switches Sub-Miniature - Sealed Pole Option M7RE DPDT PCB Mounting Section A -A Terminal Numbers for Reference Only Dimensions : Millimetres (Inches) Soldering Process: Manual soldering: Use soldering iron of 30 watts, controlled at 350C approximately 5 seconds while applying solder. Wave soldering: Recommended soldering temperature : 260 5C. Duration of solder immersion: 5 1 seconds (PCB is 1.6mm in thickness). Soldering: Vapour phase. Temperature Profile Zone Room Temperature (C) Time (seconds) Pre-heat (A) 150C Minimum 120 Soak (B) 180C to 200C Minimum 150 Peak (C) 200C to 235C Minimum 30 Peak (D) 235C to 260C Minimum 40 Peak (E) 260C Maximum 10 Page 3 21/03/08 V1.1 Toggle Switches Sub-Miniature - Sealed Specifications Switch Function Number Position 1 of Poles Position 2 On SP Position 3 Position 1 None Mom Off On None DP Connected Terminals/Schematic On Off On Position 2 N/A 2-3 Mom On 2-1 2 - 3, 5 - 6 N/A 2 - 3, 5 - 4 2AS2 2AS5 2 - 1, 5 - 4 2AD1 2AD2 Open 2 - 3, 5 - 6 Model Number 2AS4 Open Mom On Position 3 2AD3 2 - 1, 5 - 4 2AD6 Mom = Momentary Specification Table Description Part Number Switch, Toggle, DPDT, Vertical, On-Mom 2AD2T2A2M2RE Switch, Toggle, DPDT, Vertical, On-On 2AD1T2A2M2RE Switch, Toggle, DPDT, Vertical, On-Off-On 2AD3T2A2M2RE Switch, Toggle, DPDT, Vertical, On-On-On 2AD6T2A2M2RE Switch, Toggle, SPDT, Horizontal R/A, Mom-Off-Mom 2AS4T2A1M6RE Switch, Toggle, Horizontal R/A, On-Mom 2AD2T2A2M6RE Switch, Toggle, DPDT, Horizontal R/A, On-On 2AD1T2A2M6RE Switch, Toggle, DPDT, Horizontal R/A, On-On-On 2AD6T2A2M6RE Switch, Toggle, SPDT, Vertical R/A, On-Mom 2AS2T2A1M7RE Switch, Toggle, SPDT, Vertical R/A, Mom-Off-Mom 2AS4T2A1M7RE Switch, Toggle, SPDT, Vertical R/A, On-Off-Mom 2AS5T2A1M7RE Switch, Toggle, DPDT, Vertical R/A, On-Mom 2AD2T2A2M7RE Switch, Toggle, DPDT, Vertical R/A, On-On 2AD1T2A2M7RE Switch, Toggle, DPDT, Vertical R/A, On-Off-On 2AD3T2A2M7RE Switch, Toggle, DPDT, Vertical R/A, On-On-On 2AD6T2A2M7RE Page 4 21/03/08 V1.1 Toggle Switches Sub-Miniature - Sealed Part Number Explanation: T2 A2 M2 R E Actuator Bushing Terminations Contact Material Seal 2AD2 Model Number Model Number Actuator Bushing Terminations Contact Material Seal RoHS Compliant : 2AS2 = SP On-None-Mom, 2AS4 = SP Mom-Off-Mom, 2AS5 = SP On-Off-Mom, 2AD1 = DP On-NoneOn, 2AD2 = DP On-None-Mom, 2AD3 = DP On-Off-On and 2AD6 = DP On-On-On. : T2 = 6.10 High. : A1 = SP 4.65 High and A2 = DP 4.50 High. : M2 = PVC Through Hole, M6 = Right Angle, PVC Through Hole and M7 = Vertical Right Angle, PVC Through Hole. : R = Gold. : E = Epoxy (STD). Page 5 21/03/08 V1.1 Toggle Switches Sub-Miniature - Sealed Notes: International Sales Offices: AUSTRALIA - Farnell FINLAND - Farnell ITALY - Farnell SPAIN - Farnell Tel No: Tel No: Tel No: Tel No: ++61 1300 361 005 ++ 358 9 560 7780 ++ 39 02 93 995 200 901 20 20 80 Fax No: ++61 1300 361 225 Fax No: ++ 358 9 345 5411 Fax No: ++ 39 02 93 995 300 Fax No: 901 20 20 90 AUSTRIA - Farnell FRANCE - Farnell SWEDEN - Farnell Tel No: Tel No: Fax No: ++ 43 662 2180 670 Fax No: ++ 33 474 68 99 90 MALAYSIA - Farnell-Newark Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 BELGIUM - Farnell GERMANY - Farnell NETHERLANDS - Farnell SWITZERLAND - Farnell Tel No: Tel No: Tel No: ++ 43 662 2180 680 ++ 33 474 68 99 99 Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 Fax No: ++ 32 3 227 3648 Fax No: ++ 49 89 613 59 01 Fax No: ++ 31 30 241 7333 Tel No: ++ 44 204 64 64 Fax No: ++ 44 204 64 54 BRAZIL - Farnell-Newark HONG KONG - Farnell-Newark Tel No: ++ 852 2268 9888 NEW ZEALAND - Farnell UK - Farnell ++ 55 11 4066 9400 Tel No: Tel No: Fax No: ++ 55 11 4066 9410 Fax No: ++ 852 2268 9899 Fax No: 0800 90 80 81 Fax No: ++ 44 8701 200 201 CHINA - Farnell-Newark HUNGARY - Farnell NORWAY - Farnell UK - CPC Tel No: Tel No: Tel No: 800 146 70 ++ 44 8701 202 530 Tel No: ++ 32 3 475 2810 ++86 10 6238 5152 ++ 49 89 61 39 39 39 ++ 44 870 1200 208 ++ 31 30 241 7373 0800 90 80 80 ++ 44 8701 200 200 Fax No: ++86 10 6238 5022 Fax No: ++ 44 870 1200 209 Fax No: 800 146 76 ++ 44 8701 202 531 CZECH REPUBLIC - Farnell INDIA - Farnell PORTUGAL - Farnell Tel No: Tel No: Tel No: USA - Newark ++ 44 870 1200 208 ++ 44 870 1200 208 ++ 34 93 475 8804 Fax No: ++ 44 870 1200 209 Fax No: ++ 44 870 1200 209 Fax No: ++ 34 93 474 5288 DENMARK - Farnell IRELAND - Farnell RUSSIA - Farnell Tel No: Tel No: Tel No: ++ 45 44 53 66 44 Fax No: ++ 45 44 53 66 06 ++ 353 1 830 9277 ++ 44 870 1200 208 Fax No: ++ 44 870 1200 209 Fax No: ++ 353 1 830 9016 Tel No: export 800 463 9275 EXPORT - Farnell Tel No: ++ 44 8701 200 208 Fax No: ++ 44 8701 200 209 For enquiries from all other markets ESTONIA - Farnell ISRAEL - Farnell Tel No: Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 SINGAPORE - Farnell-Newark Tel No: ++ 65 6788 0200 ++ 180 937 0015 Fax No: ++ 180 937 0014 Fax No: ++ 65 6788 0300 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2008. Page 6 21/03/08 V1.1