3 V SILICON RFIC FREQUENCY UPCONVERTER FEATURES UPC8163TB BLOCK DIAGRAM * RECOMMENDED OPERATING FREQUENCY: fRFOUT = 0.8 GHz to 2.0 GHz fIFIN = 50 MHz to 300 MHz (Top View) * SUPPLY VOLTAGE: VCC = 2.7 to 3.3 V LO input 3 4 GND GND 2 5 VCC IF input 1 6 RF output * HIGH DENSITY SURFACE MOUNTING: 6-pin super minimold package * HIGH IP3: OIP3 = +9.5 dBm @ fRFOUT = 900 MHz * MINIMIZED CARRIER LEAKAGE: Due to double balanced mixer DESCRIPTION APPLICATIONS NEC's UPC8163TB is a silicon RFIC designed as a frequency upconverter for cellular/cordless telephone transmitter stages, and features improved intermodulation. This device is housed in a 6 pin super mini mold or SOT-363 package making it ideal for reducing system size. The UPC8106TB is manufactured using NEC's 20 GHz fT NESATTM III silicon bipolar process. * Digital Cellular/Cordless Phones NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = 25C, VCC = VRFOUT = 3.0 V, fIFIN = 240 MHz, PLOIN = -5 dBm unless otherwise specified) PART NUMBER PACKAGE OUTLINE SYMBOLS PARAMETERS AND CONDITIONS ICC Circuit Current (no signal) CG Conversion Gain fRFOUT = 0.9 GHz, PIFIN = -30 dBm fRFOUT = 1.9 GHz, PIFIN = -30 dBm PSAT Saturated Output Power fRFOUT = 0.9 GHz fRFOUT = 1.9 GHz OIP3 Output third Order Intercept Point, fIFIN1 = 240 MHz fIFIN2 = 240.4 MHz PIFIN = -20 dBm NF SSB Noise Figure fRFOUT = 0.9 GHz fRFOUT = 1.9 GHz fRFOUT = 0.9 GHz fRFOUT = 1.9 GHz UPC8163TB S06 UNITS MIN TYP MAX mA 11.5 16.5 23 dB dB 6 4 9 7 12 10 dBm dBm -1.5 -4.5 0.5 -2 dBm dBm +9.5 +6.0 dB dB 12.5 12.5 California Eastern Laboratories UPC8163TB RECOMMENDED OPERATING CONDITIONS ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS PARAMETERS Supply Voltage2 VCC Total Power PT PIN Dissipation3 Input Power UNITS RATINGS V 3.6 SYMBOLS 200 VCC mW dBm PLOIN +10 TOP Operating Temperature C -40 to +85 TSTG Storage Temperature C -55 to +150 fRFOUT Notes: 1. Operation in excess of any one of these conditions may result in permanent damage. 2. TA = 25C, pins 5 and 6. 3. Mounted on a double-sided copperclad 50x50x1.6 mm epoxy glass PWB, TA = 85C). PARAMETERS UNITS MIN Supply Voltage1 Local Input Level2 RF Output Frequency3 fIFIN IF Input Frequency TOP Operating Temperature TYP MAX V 2.7 3.0 3.3 dBm -10 -5 0 GHz 0.8 - 2.0 MHz 50 - 300 C -40 +25 +85 Notes: 1. Same voltage applied to pins 5 and 6 2. ZS = 50 (without matching) 3. With external matching circuit PIN FUNCTIONS Pin No. Pin Name Applied Voltage Pin Voltage 1 IFINPUT -- 1.2 This pin is the IF input to double balanced mixer. The input is a high impedance. 2 4 GND 0 -- GND pin. Ground pattern on the board should be as wide as possible. Trace length should be kept as short as possible to minimize ground impedance. 3 5 6 LOINPUT VCC -- 2.7 to 3.3 RFOUTPUT Same bias as VCC through external inductor 2.1 Description Equivalent Circuit 5 6 3 LO input pin. Recommended input level is -10 to 0 dBm. -- Supply voltage pin. -- This pin is the RF output. This pin is designed as an open collector. Due to the high impedance output, this pin requires an external LC matching circuit. 1 2 APPLICATION EXAMPLE DEMO RX VCO /N I Q PLL SW PLL I 0 Phase Shifter 90 TX PA UPC8163TB Q UPC8163TB OUTLINE DIMENSIONS (Units in mm) LEAD CONNECTIONS (Top View) PACKAGE OUTLINE S06 (Bottom View) C2Y 2.10.1 3 1.250.1 2.00.2 0.65 3 4 0.65 2 5 0.2 +0.1 -0 2 1.3 1 1 4 4 3 5 5 2 6 6 1 6 DOT ON BACK SIDE 0.9 0.1 1. 2. 3. 4. 5. 6. 0.7 +0.1 0.15 -0.5 0 ~0.1 Note: All dimensions are typical unless otherwise specified. IF INPUT GND LO INPUT GND VCC RF OUTPUT ORDERING INFORMATION PART NUMBER QUANTITY UPC8163TB-E3-A 3K/Reel Note: Embossed tape 8 mm wide. Pins 1,2,3 face tape perforation side. TEST CIRCUIT 2 (RFOUT = 1.9 GHz) TEST CIRCUIT 1 (RFOUT = 900 MHz) (Top View) (Top View) 100 pF 100 pF 3 LOin GND 4 2 GND VCC 5 10 nH 1000 pF 1.0 pF 100 pF 1 IFin 3 LOin GND 4 2 GND VCC 5 0.1 F 1000 pF 1 IFin RFout 6 100 nH TL = 5 nH 100 pF 1000 pF 0.1 F 1000 pF RFout 6 2.7 pF 900 MHz Match 1.9 GHz Match Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM 02/14/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE 5-142 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. 5-143 5-144