67-21SYGC/S530-E2/TR10 - Everlight International Corp.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 1 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

Technical Data Sheet

Reverse Package Top View LEDs

67-21SYGC/S530-XX/TR10

Features

․P-LCC-2 package.

․White package.

․Optical indicator.

․Colorless clear window.

․Wide viewing angle.

․Suitable for vapor-phase reflow, Infrared reflow

and wave solder processes.

․Computable with automatic placement equipment.

․Available on tape and reel (8mm Tape).

․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 67-21 series is available in soft orange,

green,blue and yellow. Due to the package design,

the LED has wide viewing angle and optimized

light coupling by inter reflector. This feature 、

makes the SMT TOP LED ideal for light pipe

application. The low current requirement makes

this device ideal for portable equipment or any

other application where power is at a premium.

Applications

․Automotive: backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․Light pipe application.

․General use.

Device Selection Guide

Chip

Material Emitted Color Lens Color

AlGaInP Brilliant Yellow Green Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 2 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

Package Dimensions

-

+Polarity

For reflow soldering (propose)

L

C

Tolerances dimension ±0.1 unless otherwise noted

Unit : mm

Note :

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 3 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Electrostatic Discharge ESD 2000 V

Power Dissipation Pd 60 mW

Peak Forward Current

(Duty 1/10 @1KHz) IFP 60 mA

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 4 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol

*Chip

Rank Min. Typ. Max. Unit Condition

E2 16 22 -----

E3 25 37 -----

E4 32 51 -----

Luminous Intensity IV

E5 40 63 -----

mcd IF=20mA

Viewing Angle 2θ1/2 ----- ----- 120 ----- deg IF=20mA

Peak Wavelength λp ----- ----- 575 ----- nm IF=20mA

Dominant

Wavelength λd ----- ----- 573 ----- nm IF=20mA

Spectrum Radiation

Bandwidth △λ ----- ----- 20 ----- nm IF=20mA

Forward Voltage VF ----- ----- 2.0 2.4 V IF=20mA

Reverse Current IR ----- ----- ----- 10 μA VR=5V

*67-21SYGC/S530-XX/TR10

Chip Rank

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 5 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 6 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: Tolerances Unless Dimension ±0.1mm , Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 7 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: Tolerances Unless Dimension ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 8 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 9 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is often

started at the time of the hand solder.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page: 10 of 10

Device No. : prepared date: 29-Jul-2005 Prepared by: Forrest Chen

67-21SYGC/S530-XX/TR10

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

E

VERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com