ø16mm - L6 Series
471
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
L6 Series — Miniature Switches and Pilot Devices
Key features of the 5/8” L6 Series include:
5/8” (16mm) mounting holes
Locking lever removable contact blocks
Solder terminal or PCB terminal options
Available assembled or as sub-components
Worldwide approvals
Incandescent or LED illumination
Snap action contacts
UL Recognized
File No. E55996
CSA Certifi ed
File No. LR21451
Registration No. R9551089 (E-stops)
Registration No. J9551458 (all other switches)
Registration No. R95650511 (Pilot Lights)
•
•
•
•
•
•
•
Contact Ratings
Conforming to Standards EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 N0.14
Operating Temperature Operation: –25 to +55°C (without freezing), 45 to 85% RH
Storage: -30 to +80°C (without freezing)
Vibration Resistance 5 to 55Hz, 1.0 peak-peak amplitude max
Shock Resistance Operating limit: 100 m/sec2 (approximately 10G)
Damage limit: 1000 m/sec2 (approximately 100G)
Mechanical Life Momentary pushbuttons 2,000,000 operations minimum
All others: 250,000 operations minimum
Degree of Protection IP65 (conforming to IEC 60529)
Dielectric Strength
Switch unit: between live and ground: 2500 volt AC, 1 minute
between terminals of different poles: 2500 volt AC, 1 minute
between terminals of same pole: 1000 volt AC, 1 minute
Illumination unit: between live part and ground: 2500 volt AC, 1 minute
Insulation Resistance 100MΩ minimum (using 500V DC megger)
Rated Insulation Voltage 250V AC/DC
Rated Thermal Current Gold Contacts (pcb): 3A
Silver Contacts (solder): 5A
Contact Resistance 50Ω maximum initial value
Rated Operating Current
Silver Contacts
(Solder Terminals)
Gold Clad Contacts
(PCB terminals)
30V 125V 250V 30V 125V
AC resistive — 5A 2A AC inductive - 0.1A
AC inductive — 2A 1.5A DC resistive 0.1A —
DC resistive 3A 0.4A —
DC inductive 1A 0.2A —
Minimum Recommended Load (reference value for silver
contacts) 5V AC/DC, 1mA
Terminal Style 0.110” Solder Tab /PCB
Contact Form Snap Action, Double Throw
Contact Material Solder Tab: Pure Silver /PCB: Gold Plated Silver
Electrical Life (at full load) Momentary pushbuttons: 100,000 operations minimum (1800 operations / hour)
All others: 100,000 operations minimum (1200 operations / hour)
Lamp Ratings
Lamp Current Draw
5V DC LED: 8mA
6V AC/DC LED: 7mA 6V AC/DC incandescent: 100 mA
12V AC/DC LED: 8mA 12V AC/DC incandescent: 50 mA
24V AC/DC LED: 8mA 24V AC/DC incandescent: 25 mA
120V AC = 8mA
Lamp Life Incandescent: 2000 hours./LED 50,000 hours. (on pure DC, half-life intensity)
ø16mm - L6 Series
472 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Built-in LED Lamp Ratings
Model LFTD-5kLFTD-1kLFTD-2kLFTD-H2k
Lamp Base SX6S/8x5.4
Rated Voltage 5V DC 12V AC/DC 24V AC/DC 120V AC
Operating Voltage 5V DC ±5% 12V AC/DC ±10% 24V AC/DC ±10% 120V AC ±5%
Current Draw AC — 9mA 9mA 8mA
DC 8mA 8mA 8mA —
Color Code kSpecify a color code in place of k in the Part No: A (amber), G (green), R (red), S (blue), W (white), Y (yellow)
Lamp Base Color Same as illumination color
Voltage Marking Stamped on the lamp base
Life (reference value) Approx. 50,000 hours
Internal Circuit
A, R, W, Y A, R, W, Y
LED Chip
Protection Diode
Zener Diode
(+) (–)
G, S G, S
(+) (–)
Non-Illuminated Pushbuttons (Assembled)
Non-Illuminated Pushbuttons
Style Operation Contact Terminal Style
Solder Tab PCB
Round Momentary SPDT LA1B-M1C5-jLA1B-M1C1V-j
DPDT LA1B-M1C6-jLA1B-M1C2V-j
Maintained
SPDT LA1B-A1C5-jLA1B-A1C1V-j
DPDT LA1B-A1C6-jLA1B-A1C2V-j
Square Momentary SPDT LA2B-M1C5-jLA2B-M1C1V-j
DPDT LA2B-M1C6-jLA2B-M1C2V-j
Maintained
SPDT LA2B-A1C5-jLA2B-A1C1V-j
DPDT LA2B-A1C6-jLA2B-A1C2V-j
Rectangular Momentary SPDT LA3B-M1C5-jLA3B-M1C1V-j
DPDT LA3B-M1C6-jLA3B-M1C2V-j
Maintained
SPDT LA3B-A1C5-jLA3B-A1C1V-j
DPDT LA3B-A1C6-jLA3B-A1C2V-j
Oversize Round Flush Momentary SPDT HA1B-M1C5-jHA1B-M1C1V-j
DPDT HA1B-M1C6-jHA1B-M1C2V-j
Maintained
SPDT HA1B-A1C5-jHA1B-A1C1V-j
DPDT HA1B-A1C6-jHA1B-A1C2V-j
Style Operation Contact Terminal Style
Solder Tab PCB
Oversize Round
Extended Momentary SPDT HA1B-M2C5-jHA1B-M2C1V-j
DPDT HA1B-M2C6-jHA1B-M2C2V-j
Maintained
SPDT HA1B-A2C5-jHA1B-A2C1V-j
DPDT HA1B-A2C6-jHA1B-A2C2V-j
Oversize Square Flush Momentary SPDT HA2B-M1C5-jHA2B-M1C1V-j
DPDT HA2B-M1C6-jHA2B-M1C2V-j
Maintained
SPDT HA2B-A1C5-jHA2B-A1C1V-j
DPDT HA2B-A1C6-jHA2B-A1C2V-j
Oversize Square
Extended Momentary SPDT HA2B-M2C5-jHA2B-M2C1V-j
DPDT HA2B-M2C6-jHA2B-M2C2V-j
Maintained
SPDT HA2B-A2C5-jHA2B-A2C1V-j
DPDT HA2B-A2C6-jHA2B-A2C2V-j
Mushroom Momentary SPDT HA1B-M3C5-jHA1B-M3C1V-j
DPDT HA1B-M3C6-jHA1B-M3C2V-j
Maintained
SPDT HA1B-A3C5-jHA1B-A3C1V-j
DPDT HA1B-A3C6-jHA1B-A3C2V-j
1. In place of j specify Button Color Code from table.
2. Illuminated (translucent) style lenses also available, specify as such: instead of LA1B-M1C5-j use LA1B-M1C5L-k in place of k
(specify Lens Color Code from next page.)
3. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” respectively, ie LA1B-M1C1V-j becomes
LA1B-M1C5V-j).
jButton Color Codes
Color Code Color Code
Black B Blue S
Green G White W
Red R Yellow Y
ø16mm - L6 Series
473
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Non-Illuminated Pushbuttons (Sub-Assembled)
Contact + Safety Lever Lock + Operator + Button = Complete Part
Operators
Style Momentary Maintained
Round
LA1L-MO LA1L-AO
Square
LA2L-MO LA2L-AO
Rectangular
LA3L-MO LA3L-AO
Oversize Round
HA1B-MO HA1B-AO
Oversize Square
HA2B-MO HA2B-AO
Mushroom
HA1B-MOL HA1B-A0L
1. In place of j specify Button Color Code from table
on right.
2. In place of k specify Lens Color Code from table
on right.
3. *requires HA1L-M0 or HA1L-A0 operator instead
of HA1B-M0 or HA1B-A0.
4. **requires HA2L-M0 or HA2L-A0 instead of
HA2B-M0 or HA2B-A0.
Buttons/Lenses
Style Button Lens
Round
AB6M-BK2-j AL6M-LK2-k
Square
AB6Q-BK2-j AL6Q-LK2-k
Rectangular
AB6H-BK2-j AL6H-LK2-k
Oversize Round
Flush
HA1A-B1-j HA1A-L1-k*
Oversize Round
Extended
HA1A-B2-j–
Oversize Square
Flush
HA2A-B1-jH A2A-L1-k**
Oversize Square
Extended
HA2A-B2-j–
Mushroom
HA1A-B3-jHA1A-L3-k
Contacts
Appearance Contacts
Terminal Style
Solder
Tab PCB
Gold
SPDT
DPDT
HA-C1
HA-C2
HA-C1V
HA-C2V
Silver
SPDT
DPDT
HA-C5
HA-C6
HA-C5V
HA-C6V
Safety Lever Lock
Appearance Part Number
HA9Z-LS
j Button Color Code
Color Code
Black B
Green G
Red R
Blue S
White W
Yellow Y
k Lens Color Code
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
505
800-262-IDEC (4332) • USA & Canada
ø16mm - L6 Series
Switches & Pilot Devices
HA1B/HA1E Stop Switch
Key features:
• PCBorSolderTerminals
• LockingLeverRemovableContactBlocks
• PositiveActionContacts
• 1or2formB(SPST-NC)Contacts
• IP65Protection
• 16mmMountingHole
• TamperProofConstruction
FileNo.DK95-00138

CSA
FileNo.LR21451

ULRecognized
FileNo.E55996
 
Direct
Opening
Action 
Specifications
Contact Form 1or2formB(SPST-NC)
Termination PCBorSolderTerminal
Contact Material Silver
Applicable Standards EN60947-5-1,UL508,CSA22.2.No.14
Rated Insulation Voltage 250VAC/DC
Degree of Protection IP65
Conditional Short-Circuit Current and
Short-Circuit Protective Device
50A(at250V)10A250VFuse,operation
classMaccordingtoIEC269-1andIEC269-2
Positive
Opening
Operation
Positiveopeningtravel 3.4mm
Minimumforcerequiredtoachievepositive
openingoperationofallbreakcontacts. 10.3N(2formBcontacts)
Maximumtravelincludingtravelbeyondthe
minimumtravelposition 5.5mm
Maximumfrequencyofactuation 1,200operations/hour
Pollution Degree 3
Nameplates
HAAV–Yellow Plastic
ø43mm
Marking Part Number
Blank HAAV-0
Positive Action Stop Switch Accessories: Shroud
Style Operation Contact Terminal Style Style Part Number Applicable Standards
XA9Z-KG1 SEMIS2Compliant
(ApprovedbyTUV)
Solder Tab PCB
Stop
Switch
Pushlock/
TurnReset
DPST(NC)(2formB) HA1B-V2E2R HA1B-
V2E2VR
ShortBody SPST-NC(1formB)
DPST-NC(2formB)
HA1E-V2S1R
HA1E-V2S2R —
1. Buttonisnon-removable,availableinredandascompleteassembledunitonly.
2. StopSwitchdoesnotcomewithsafetyleverlock.
Buzzers (IP40)
Style Operating Voltage
Terminal Style
Solder/
Tab PCB
Buzzer-Rectangular
6VAC/DC±10% LA3Z-1X2 LA3Z-1X2V
12Vto24AC/DC±10% LA3Z-1X4 LA3Z-1X4V
Buzzer Ratings
Frequency 2khz±500HZ
Amplitude 80db@0.1m(atratedvoltage)
OperatingVoltage 6VAC/DCor12-24VAC/DC±10%
AdjustableCycle 55to600cyclesperminute
CurrentDraw DC:7mA
AC:20mA
Life 1000hrs.minimum
InsulationVoltage 60VAC/DC
OperatingTemperature -20to55ºC(nofreezing),45to85%
RH
DegreeofProtection IP40
ø16mm - L6 Series
475
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Pilot Lights (Assembled)
Pilot Lights
Style Terminal Style
Solder Tab PCB
Round
LA1P-1C0l-k LA1P-1C0lV-k
Square
LA2P-1C0l-k LA2P-1C0lV-k
Rectangular
LA3P-1C0l-k LA3P-1C0lV-k
Oversize Round
HA1P-1C0l-kHA1P-1C0lV-k
Oversize Square
HA2P-1C0l-kHA2P-1C0lV-k
Oversize Round Unibody
HA1P-1l-k—
Oversize Square Unibody
HA2P-1l-k—
kLens/LED Color Codes
Color Code
Amber A
Green G
Red R
Blue S
White W
Yellow Y
lVoltage/Lamp Code
Voltage Code
5V DC LED 1
6V AC/DC LED 2
12V AC/DC LED 3
24V AC/DC LED 4
120V AC LED 8
6V AC/DC Incandescent 5
12V AC/DC Incandescent 6
24V AC/DC Incandescent 7
1. In place of k specify Lens/LED Color Code
from table.
2. In place of l specify Voltage Code from
table.
3. Lamps also available in 5VDC, 6V AC/DC, 12V
AC/DC or 120V AC, change “4” or “7” using
Voltage/Lamp Codes (ie LA1P-1C03-k uses
12V AC/DC LED).
4. Light independent of switch position.
ø16mm - L6 Series
476 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Pilot Lights (Sub-Assembled)
Terminals + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens = Completed Unit
Operators
Style Part Number
Round
LA1P-0
Square
LA2P-0
Rectangular
LA3P-0
Oversize Round
HA1P-0
Oversize Square
HA2P-0
Oversize Round Unibody
HA1P-00
Oversize Square Unibody
HA2P-00
Lenses
Style Part Number
Round
AL6M-LK3-k
Square
AL6Q-LK3-k
Rectangular
AL6H-LK3-k
Oversize Round
HA1A-P1-k
Oversize Square
HA2A-P1-k
In place of k specify lens color code.
Lamps
Style Voltage Part Number
LED 5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120 V AC
LFTD-5k
LFTD-6k
LFTD-1k
LFTD-2k
LFTD-H2k
Incandescent
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
In place of k specify LED color code from table below.
Terminals
Appearance Solder Tab PCB
HA-C00 HA-C00V
Not required for unibody operators.
Lamp Holder
Appearance Part Number
HA9Z-AH
Safety Lever Lock
Appearance Part Number
HA9Z-LS
k Lens/LED Color Codes
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
ø16mm - L6 Series
477
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Illuminated Pushbuttons (Assembled)
Illuminated Pushbuttons
Style Operation Contact Terminal Style
Solder Tab PCB
Round
Momentary SPDT
DPDT
LA1L-M1C5l-k
LA1L-M1C6l-k
LA1L-M1C1lV-k
LA1L-M1C2lV-k
Maintained SPDT
DPDT
LA1L-A1C5l-k
LA1L-A1C6l-k
LA1L-A1C1lV-k
LA1L-A1C2lV-k
Square
Momentary SPDT
DPDT
LA2L-M1C5l-k
LA2L-M1C6l-k
LA2L-M1C1lV-k
LA2L-M1C2lV-k
Maintained SPDT
DPDT
LA2L-A1C5l-k
LA2L-A1C6l-k
LA2L-A1C1lV-k
LA2L-A1C2lV-k
Rectangular
Momentary SPDT
DPDT
LA3L-M1C5l-k
LA3L-M1C6l-k
LA3L-M1C1lV-k
LA3L-M1C2lV-k
Maintained SPDT
DPDT
LA3L-A1C5l-k
LA3L-A1C6l-k
LA3L-A1C1lV-k
LA3L-A1C2lV-k
Oversize Round
Momentary SPDT
DPDT
HA1L-M1C5l-k
HA1L-M1C6l-k
HA1L-M1C1lV-k
HA1L-M1C2lV-k
Maintained SPDT
DPDT
HA1L-A1C5l-k
HA1L-A1C6l-k
HA1L-A1C1lV-k
HA1L-A1C2lV-k
Oversize Square
Momentary SPDT
DPDT
HA2L-M1C5l-k
HA2L-M1C6l-k
HA2L-M1C1lV-k
HA2L-M1C2lV-k
Maintained SPDT
DPDT
HA2L-A1C5l-k
HA2L-A1C6l-k
HA2L-A1C1lV-k
HA2L-A1C2lV-k
Mushroom
Momentary SPDT
DPDT
HA1L-M3C5l-k
HA1L-M3C6l-k
HA1L-M3C1lV-k
HA1L-M3C2lV-k
Maintained SPDT
DPDT
HA1L-A3C5l-k
HA1L-A3C6l-k
HA1L-A3C1lV-k
HA1L-A3C2lV-k
kLens Color Codes
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
lVoltage/Lamp Code
Voltage Code
5V DC LED 1
6V AC/DC LED 2
12V AC/DC LED 3
24V AC/DC LED 4
120 V AC LED 8
6V AC/DC Incandescent 5
12V AC/DC Incandescent 6
24V AC/DC Incandescent 7
1. In place of k specify Lens Color Code from
table.
2. In place of l specify Voltage Code from
table.
3. Lamps also available in 5V DC, 6V AC/DC,
12V AC/DC or 120V AC, change “4” or “7”
using voltage/lamp codes (ie LA1P-1C03-k
uses 12V AC/DC LED).
4. PCB terminal models also available with
silver contacts change “1” or “2” to “5” or “6”
respectively, (ie LA1L-M1C14V-j becomes
LA1L-M1C54V-j).
5. Light independent of switch position.
ø16mm - L6 Series
478 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Illuminated Pushbuttons (Sub-Assembled)
Terminals + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens = Completed Unit
Operators
Style Momentary Maintained
Round
LA1L-MO LA1L-AO
Square
LA2L-MO LA2L-AO
Rectangular
LA3L-MO LA3L-AO
Oversize Round
HA1L-MO HA1L-A0
Oversize Square
HA2L-MO HA2L-AO
Mushroom
HA1B-MOL HA1B-AOL
k Lens/LED Color Codes
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
Lenses
Style Part Number
Round
AL6M-LK2-k
Square
AL6Q-LK2-k
Rectangular
AL6H-LK2-k
Oversize Round
HA1A-L1-k
Oversize Square
HA2A-L1-k
Mushroom
HA1A-L3-k
In place of k specify lens color code.
Lamps
Style Voltage Part Number
LED 5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120 V AC
LFTD-5k
LFTD-6k
LFTD-1k
LFTD-2k
LFTD-H2k
Incandescent
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
Contacts
Appearance Contacts
Terminal Style
Solder
Tab PCB
Gold
SPDT
DPDT
HA-C10
HA-C20
HA-C10V
HA-C20V
Silver
SPDT
DPDT
HA-C50
HA-C60
HA-C50V
HA-C60V
Lamp Holder
Appearance Part Number
HA9Z-AH
Safety Lever Lock
Appearance Part Number
HA9Z-LS
ø16mm - L6 Series
479
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Selector Switches (Assembled)
Selector Switches
Style Position Contact Terminal Style
Solder Tab PCB
Round
90˚ 2 -Position
Maintained LR DPDT LA1S-2C6 LA1S-2C2V
Spring return
from right
LR DPDT LA1S-21C6 LA1S-21C2V
45˚ 3-Position
Maintained L
C
R DPDT LA1S-3C6 LA1S-3C2V
Spring return
from right
LR DPDT LA1S-31C6 LA1S-31C2V
Spring return
from left
L
C
R DPDT LA1S-32C6 LA1S-32C2V
2-Way spring
return
L
C
R DPDT LA1S-33C6 LA1S-33C2V
Square
90˚ 2 -Position
Maintained LR DPDT LA2S-2C6 LA2S-2C2V
Spring return
from right
LR DPDT LA2S-21C6 LA2S-21C2V
45˚ 3-Position
Maintained L
C
R DPDT LA2S-3C6 LA2S-3C2V
Spring return
from right
LR DPDT LA2S-31C6 LA2S-31C2V
Spring return
from left
L
C
R DPDT LA2S-32C6 LA2S-32C2V
2-Way spring
return
L
C
R DPDT LA2S-33C6 LA2S-33C2V
Rectangular
90˚ 2 -Position
Maintained LR DPDT LA3S-2C6 LA3S-2C2V
Spring return
from right
LR DPDT LA3S-21C6 LA3S-21C2V
45˚ 3-Position
Maintained L
C
R DPDT LA3S-3C6 LA3S-3C2V
Spring return
from right
LR DPDT LA3S-31C6 LA3S-31C2V
Spring return
from left
L
C
R DPDT LA3S-32C6 LA3S-32C2V
2-Way spring
return
L
C
R DPDT LA3S-33C6 LA3S-33C2V
Oversize Round
90˚ 2 -Position
Maintained LR DPDT HA1S-2C6 HA1S-2C2V
Spring return
from right
LR DPDT HA1S-21C6 HA1S-21C2V
45˚ 3-Position
Maintained L
C
R DPDT HA1S-3C6 HA1S-3C2V
Spring return
from right
LR DPDT HA1S-31C6 HA1S-31C2V
Spring return
from left
L
C
R DPDT HA1S-32C6 HA1S-32C2V
2-Way spring
return
L
C
R DPDT HA1S-33C6 HA1S-33C2V
Contact Operations
(for all selectors)
Contacts Operator Position and
Contact Operation
2-pos.
(DPDT)
Left
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC
Right
NO
C
NC NO
C
NC
Left
Contact
Right
Contact
3-pos.
(DPDT)
Left
NO
C
NC NO
C
NC
Left
Contact
Right
Contact
Center
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC
Right NO
C
NC NO
C
NC
Left
Contact
Right
Contact
As viewed from front of switch.
1. All assembled selector switches use DPDT
contacts.
2. For SPDT contacts see sub-components on
next page.
3. PCB terminal models also available with
silver contacts change “1” or “2” to “5” or
“6” respectively, (ie LA1S-21C2V becomes
LA1S-21C6V).
ø16mm - L6 Series
480 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Selector Switches (Sub-Assembled)
Contact + Safety Lever Lock + Operator = Complete Part
Operators
Style Position Function Part Number
Round 2Maintained
Spring from right
LA1S-2Y
LA1S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA1S-3Y
LA1S-31Y
LA1S-32Y
LA1S-33Y
Square 2Maintained
Spring from right
LA2S-2Y
LA2S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA2S-3Y
LA2S-31Y
LA2S-32Y
LA2S-33Y
Rectangular 2Maintained
Spring from right
LA3S-2Y
LA3S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA3S-3Y
LA3S-31Y
LA3S-32Y
LA3S-33Y
Oversize Round 2Maintained
Spring from right
HA1S-2Y
HA1S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
HA1S-3Y
HA1S-31Y
HA1S-32Y
HA1S-33Y
Contacts
Appearance Contacts
Terminal Style
Solder
Tab PCB
Gold
SPDT
DPDT
HA-C1
HA-C2
HA-C1V
HA-C2V
Silver
SPDT
DPDT
HA-C5
HA-C6
HA-C5V
HA-C6V
1. All assembled switches listed on previous page
use DPDT contacts.
2. SPDT Contacts for use on 2 position selector
switch only
Safety Lever Lock
Appearance Part Number
HA9Z-LS
ø16mm - L6 Series
481
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Key Switches (Assembled)
Key Switches
Style Position Contact Terminal Style
Solder Tab PCB
Round
90˚ 2 -Position
Maintained LR DPDT LA1K-2C6lLA1K-2C2Vl
Spring return
from right
LR DPDT LA1K-21C6B LA1K-21C2VB
45˚ 3-Position
Maintained L
C
R DPDT LA1K-3C6lLA1K-3C2Vl
Spring return
from right L
C
R DPDT LA1K-31C6lLA1K-31C2Vl
Spring return
from left
L
C
R DPDT LA1K-32C6lLA1K-32C2Vl
2-Way spring
return
L
C
R DPDT LA1K-33C6D LA1K-33C2VD
Square
90˚ 2 -Position
Maintained LR DPDT LA2K-2C6lLA2K-2C2Vl
Spring return
from right
LR DPDT LA2K-21C6B LA2K-21C2VB
45˚ 3-Position
Maintained L
C
R DPDT LA2K-3C6lLA2K-3C2Vl
Spring return
from right L
C
R DPDT LA2K-31C6lLA2K-31C2Vl
Spring return
from left
L
C
R DPDT LA2K-32C6lLA2K-32C2Vl
2-Way spring
return
L
C
R DPDT LA2K-33C6D LA2K-33C2VD
Rectangular
90˚ 2 -Position
Maintained LR DPDT LA3K-2C6lLA3K-2C2Vl
Spring return
from right
LR DPDT LA3K-21C6B LA3K-21C2VB
45˚ 3-Position
Maintained L
C
R DPDT LA3K-3C6lLA3K-3C2Vl
Spring return
from right L
C
R DPDT LA3K-31C6lLA3K-31C2Vl
Spring return
from left
L
C
R DPDT LA3K-32C6lLA3K-32C2Vl
2-Way spring
return
L
C
R DPDT LA3K-33C6D LA3K-33C2VD
Oversize Round
90˚ 2 -Position
Maintained LR DPDT HA1K-2C6lHA1K-2C2Vl
Spring return
from right
LR DPDT HA1K-21C6B HA1K-21C2VB
45˚ 3-Position
Maintained L
C
R DPDT HA1K-3C6lHA1K-3C2Vl
Spring return
from right L
C
R DPDT HA1K-31C6lHA1K-31C2Vl
Spring return
from left
L
C
R DPDT HA1K-32C6lHA1K-32C2Vl
2-Way spring
return
L
C
R DPDT HA1K-33C6D HA1K-33C2VD
Contact Operations
(for all selectors)
Contacts Operator Position and
Contact Operation
2-pos.
(DPDT)
Left
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC
Right NO
C
NC NO
C
NC
Left
Contact
Right
Contact
3-pos.
(DPDT)
Left
NO
C
NC NO
C
NC
Left
Contact
Right
Contact
Center
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC
Right
NO
C
NC NO
C
NC
Left
Contact
Right
Contact
As viewed from front of switch.
l Key Retention Option Codes
Code Description
AKey not retained in any position
(removable in all positions)
B Key retained in right position only
C Key retained in left position only
DKey retained in left and right
(3 position only)
EKey retained in center only
(3 position only)
GKey retained right and center
(3 position only)
HKey retained left and center
(3 position only)
Key cannot be removed from a
spring-return position.
1. In place of l specify Key Retention Code
from next page.
2. All assembled key switches have DPDT
contacts. For SPDT see sub-assembled on
next page.
3. PCB terminal models also available with
silver contacts change “1” or “2” to “5” or
“6” respectively, (ie LA1K-2C2Vl becomes
LA1K-2C6Vl).
ø16mm - L6 Series
482 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Selector Switches (Sub-Assembled)
Contact + Safety Lever Lock + Operator = Complete Part
Operators
Style Position Function Part Number
Round 2Maintained
Spring from right
LA1K-2l
LA1K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
LA1K-3l
LA1K-31l
LA1K-32l
LA1K-33D
Square 2Maintained
Spring from right
LA2K-2l
LA2K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
LA2K-3l
LA2K-31l
LA2K-32l
LA2K-33D
Rectangular 2Maintained
Spring from right
LA3K-2l
LA3K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
LA3K-3l
LA3K-31l
LA3K-32l
LA3K-33D
Oversize Round 2Maintained
Spring from right
HA1K-2l
HA1K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
HA1K-3l
HA1K-31l
HA1K-32l
HA1K-33D
1. In place of l specify key removable code from table on right.
2. Operator includes two keys.
Contacts
Appearance Contacts
Terminal Style
Solder
Tab PCB
Gold
SPDT
DPDT
HA-C1
HA-C2
HA-C1V
HA-C2V
Silver
SPDT
DPDT
HA-C5
HA-C6
HA-C5V
HA-C6V
1. All assembled switches listed on previous page
use DPDT contacts.
2. SPDT Contacts for use on 2 position selector
switch only
Safety Lever Lock
Appearance Part Number
HA9Z-LS
l Key Retention Option Codes
Code Description
AKey not retained in any position
(removable in all positions)
B Key retained in right position only
C Key retained in left position only
DKey retained in left and right
(3 position only)
EKey retained in center only
(3 position only)
GKey retained right and center
(3 position only)
HKey retained left and center
(3 position only)
Key cannot be removed from a
spring-return position.
ø16mm - L6 Series
483
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Illuminated Selector Switches (Assembled)
Illuminated Selector Switches
Style Position Contact Terminal Style
Solder Tab PCB
Round
90˚ 2 -Position
Maintained LR DPDT LA1F-2C6l-k LA1F-2C2lV-k
Spring return
from right
LR DPDT LA1F-21C6l-kLA1F-21C2lV-k
45˚ 3-Position
Maintained L
C
R DPDT LA1F-3C6l-kLA1F-3C2lV-k
Spring return
from right L
C
R DPDT LA1F-31C6l-kLA1F-31C2lV-k
Spring return
from left
L
C
R DPDT LA1F-32C6l-kLA1F-32C2lV-k
2-Way
spring return
L
C
R DPDT LA1F-33C6l-k LA1F-33C2lV-k
Square
90˚ 2 -Position
Maintained LR DPDT LA2F-2C6l-kLA2F-2C2lV-k
Spring return
from right
LR DPDT LA2F-21C6l-kLA2F-21C2lV-k
45˚ 3-Position
Maintained L
C
R DPDT LA2F-3C6l-kLA2F-3C2lV-k
Spring return
from right L
C
R DPDT LA2F-31C6l-kLA2F-31C2lV-k
Spring return
from left
L
C
R DPDT LA2F-32C6l-kLA2F-32C2lV-k
2-Way
spring return
L
C
R DPDT LA2F-33C6l-kLA2F-33C2lV-k
Rectangular
90˚ 2 -Position
Maintained LR DPDT LA3F-2C6l-k LA3F-2C2lV-k
Spring return
from right
LR DPDT LA3F-21C6l-kLA3F-21C2lV-k
45˚ 3-Position
Maintained L
C
R DPDT LA3F-3C6l-kLA3F-3C2lV-k
Spring return
from right L
C
R DPDT LA3F-31C6l-kLA3F-31C2lV-k
Spring return
from left
L
C
R DPDT LA3F-32C6l-kLA3F-32C2lV-k
2-Way
spring return
L
C
R DPDT LA3F-33C6l-k LA3F-33C2lV-k
Oversize Round
90˚ 2 -Position
Maintained LR DPDT HA1F-2C6l-kHA1F-2C2lV-k
Spring return
from right
LR DPDT HA1F-21C6l-kHA1F-21C2lV-k
45˚ 3-Position
Maintained L
C
R DPDT HA1F-3C6l-kHA1F-3C2lV-k
Spring return
from right L
C
R DPDT HA1F-31C6l-kHA1F-31C2lV-k
Spring return
from left
L
C
R DPDT HA1F-32C6l-kHA1F-32C2lV-k
2-Way
spring return
L
C
R DPDT HA1F-33C6l-kHA1F-33C2lV-k
Contact Operations
(for all selectors)
Contacts Operator Position and
Contact Operation
2-pos.
(DPDT)
Left
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC
Right
NO
C
NC NO
C
NC
Left
Contact
Right
Contact
3-pos.
(DPDT)
Left
NO
C
NC NO
C
NC
Left
Contact
Right
Contact
Center
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC
Right NO
C
NC NO
C
NC
Left
Contact
Right
Contact
As viewed from front of switch.
k Lens/LED Color Codes
Color Code Color Code
Amber A Blue S
Green G Yellow Y
Red R White W
l Voltage/Lamp Code
Voltage Code
5V DC LED 1
6V AC/DC LED 2
12V AC/DC LED 3
24V AC/DC LED 4
120V AC LED 8
6V AC/DC Incandescent 5
12V AC/DC Incandescent 6
24V AC/DC Incandescent 7
1. In place of k specify Lens/LED Color Code
from table above.
2. In place of l specify Voltage Code from
table above.
3. Lamps also available in 5V DC, 6V AC/DC, 12
V AC/DC or 120V AC, change “4” or “7” using
voltage/lamp codes (ie LA1F-2C63-k uses
12V AC/DC LED).
4. All switches listed have DPDT contacts. For
SPDT see sub-assembled on next page.
5. PCB terminal models also available with
silver contacts change “1” or “2” to “5” or
“6” respectively, (ie LA1F-2C24V-k becomes
LA1F-2C64V-k).
6. Light independent of switch position.
ø16mm - L6 Series
484 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Illuminated Selector Switches (Sub-Assembled)
Contacts + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens/Handle = Completed Unit
Operators
Style Position Function Part Number
Round
2Maintained
Spring from right
LA1F-20
LA1F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA1F-30
LA1F-310
LA1F-320
LA1F-330
Square
2Maintained
Spring from right
LA2F-20
LA2F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA2F-30
LA2F-310
LA2F-320
LA2F-330
Rectangular
2Maintained
Spring from right
LA3F-20
LA3F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA3F-30
LA3F-310
LA3F-320
LA3F-330
Oversize
Round
2Maintained
Spring from right
HA1F-20
HA1F-210
3
Maintained
Spring from right
Spring from left
Spring from both
HA1F-30
HA1F-310
HA1F-320
HA1F-330
Contacts
Appearance Con-
tacts
Terminal Style
Solder
Tab PCB
Gold
SPDT
DPDT
HA-C10
HA-C20
HA-C10V
HA-C20V
Silver
SPDT
DPDT
HA-C50
HA-C60
HA-C50V
HA-C60V
All assembled selectors on previous pages use DPDT
contacts. SPDT contacts are for use only on two posi-
tion selectors.
Lenses/Handles
Appearance Part Number
Standard
LA1A-F-k
Oversize
HA1A-F-k
In place of k specify lens color code from table.
Safety Lever Lock
Appearance Part Number
HA9Z-LS
Lamp Holder
Appearance Part Number
HA9Z-AH
Lamps
Style Voltage Part Number
LED 5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120V AC
LFTD-5k
LFTD-6k
LFTD-1k
LFTD-2k
LFTD-H2k
Incandescent
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
In place of k specify LED color code from table below.
k Lens/LED Color Codes
Color Code
Amber A
Green G
Red R
Blue S
Yellow Y
White W
ø16mm - L6 Series
485
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Pushbutton Selectors (Assembled)
Pushbutton Selectors
Style Terminal Style
Solder Tab PCB
2 Position HA1R-2C6-jHA1R-2C2V-j
3 Position HA1R-3C6-jHA1R-3C2V-j
1. In place of j specify Button Color Code.
2. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6”
respectively, ie HA1R-2C2V-j becomes HA1R-2C6V-j).
3. Pushed position, momentary only.
j Button Color Codes
Color Code Color Code
Amber A Blue S
Green G Yellow Y
Red R White W
Contact Operation
Contacts Operator Position and Contact Information
Down Center Up
2-pos.
(DPDT)
Maintained
Spring from Top
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC NO
C
NC NO
C
NC
Left
Contact
Right
Contact
2-pos.
(DPDT)
Spring Return
from Bottom
NO
C
NC NO
C
NC
Left
Contact
Right
Contact
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC
3-pos.
(DPDT) All models
NO
C
NC NO
C
NC
Left
Contact
Right
Contact Left
Contact
NO
C
NC
Right
Contact
NO
C
NC NO
C
NC NO
C
NC
Left
Contact
Right
Contact
As viewed from front of switch.
Contact Operation
Style Operator Position
Left Center Right
2 Position
Normal Pushed Normal Pushed Normal Pushed
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC NO
C
NC NO
C
NC
Le
f
t
Contact
Right
Contact
——
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC NO
C
NC NO
C
NC
Left
Contact
Right
Contact
3 Position
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC NO
C
NC NO
C
NC
Left
Contact
Right
Contact Left
Contact
NO
C
NC
Right
Contact
NO
C
NC
Blocked
Left
Contact
NO
C
NC
Right
Contact
NO
C
NC NO
C
NC NO
C
NC
Left
Contact
Right
Contact
Lever Switches
Style Operation Contacts Terminal Type
Solder Tab PCB
2 -Position
Maintained
U
D
DPDT LA1T-2C6 LA1T-2C2V
Spring return from top
U
D
DPDT LA1T-21C6 LA1T-21C2V
Spring return from bottom
U
D
DPDT LA1T-22C6 LA1T-22C2V
3-Position
Maintained
U
C
D
DPDT LA1T-3C6 LA1T-3C2V
Spring return from top
U
C
D
DPDT LA1T-31C6 LA1T-31C2V
Spring return from bottom
U
C
D
DPDT LA1T-32C6 LA1T-32C2V
Spring return from both
U
C
D
DPDT LA1T-33C6 LA1T-33C2V
1. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” respectively, ie LA1T-2C2V becomes
LA1T-2C6V).
2. Terminology: U = up, D = down, C = center.
ø16mm - L6 Series
486 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Switch Engraving Order Form – L6 Series
Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved.
To insure engraving accuracy, fax it to your IDEC representative or Distributor.
Your Company: Telephone:
Name: Fax:
Address: Email:
PO: Part Number to be Engraved:
Please check one of the boxes below to indicate your choice of engraving options:
Rectangular
Switch
Square
Switch
Round
Switch
# of Lines Letter
Height
Max. Characters
Per Line # of Lines Letter
Height
Max. Characters
Per Line
# of
Lines
Letter
Height
Max. Characters
Per Line
1 5/32 6 1 5/32 5
1
5/32 3
2
5/32 6
2
5/32 5 1/8 3
1/8 6 1/8 6 2 Custom*
3 1/8 6 3 1/8 6 3 Custom*
4 N/A 4 N/A 4 N/A
*Engraving is possible, but character size will be
smaller than standard sizes.
1. Above mentioned specifi cations hold true for standard size pushbuttons (round, square and rectangular).
2. Oversize pushbuttons and pilot lights allow you to engrave 1 additional character.
3. Engraving is done on the button itself for non-iIlluminated push buttons and on marking plate for illuminated pushbuttons and pilot lights.
4. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters.
Enter text to be engraved:
Line 1:
Line 2:
Line 3:
Line 4:
Sample Letter Sizes
1/8 Letters:
5/32 Letters:
For IDEC Internal Use Only:
Work Order #:
ø16mm - L6 Series
487
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Accessories
Part Specifi cations Part Number Notes
Ring Wrench Made of metal MT-001
Used for tightening the plastic locking ring when install-
ing the L6 series unit on a panel.
Tightening torque should not exceed 9kgf cm when
tightening the locking ring.
Lamp Holder Tool
(Made of Rubber)
Made of rubber. Used for removing and replacing
LED and incandescent lamps in illuminated units. OR-44 Rubber tool used for replacing LED and incandescent
lamps.
Lens Removal Tool For Illuminated pushbuttons and pilot lights. MT-101 Used for removing the lens or button from the housing.
LED Lamp
5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120V AC
LFTD-5k
LFTD-6k
LFTD-1k
LFTD-2k
LFTD-H2k
T 1-3/4 miniature fl ange base. In place of j specify LED
Color Code (A, G, R, S, W, Y).
Incandescent Lamp
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
0.5W, T 1-3/4 miniature fl ange base
Switch Guard
90 degrees
opening maintained
Round/Square AL-K6 Prevents inadvertent switch operation. IP40 dust-tight
rated.
Rectangular AL-KH6
180 degrees
opening,
spring return
Round/Square AL-K6SP
Prevents inadvertent switch operation. IP65 oiltight
rated.
Rectangular AL-KH6SP
Oversize Round/Sq HA9Z-K1
Dust-proof Cover
For round units AL-D6
Provides extra level of sealing for “front-panel” portion
of switches. (Not applicable for units with oversize
lenses or buttons).
For square units AL-DQ6
For rectangular units AL-DH6
Terminal Cover Made of white nylon
All removable contacts H6-VL2 Covers terminals to prevent possible electric shock.
Unibody Pilot Lights H6-PVL
Mounting Hole Plug
Rubber AL-B6 Fills unused panel cutouts. Made of nitrile rubber. Push-
in installation from front of panel. IP65 (oiltight) rated.
Aluminum AL-BM6 Fills unused panel cutouts. Made of aluminum. Screw-
on locking ring from inside of panel. IP65 (oiltight) rated.
Replacement Keys
for LA1K, LA2K, LA3K (#132) AS6-SK
Pair of keys.
for HA1K (#231) – oversize KG9Z-SK
Replacement
Engraving Inserts
Round
Square
Rectangle
Oversize Round
Oversize Square
Mushroom
AL6M-W
AL6Q-W
AL6H-W
HA9Z-P1-W
HA9Z-P2-W
HA9Z-P13-W
Replacement
Locking Ring All models HA9Z-LN
Replacement
Anti-Rotation Ring
L6 standard AL6-LP Prevents rotation of switches in panel. (included with all
assembled switches)
L6 oversize HA9Z-LP
Replacement
Selector Inserts HA9Z-HC1-jApplicable to round oversize selectors only
j = (G, R, S, W, Y)
Replacement
Safety Lever Lock HA9Z-LS
ø16mm - L6 Series
488 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Appearance Description Used With Part Number
Flush Bezel
ø24mm round, metal (aluminum color), panel cut-out ø20.2mm
Pushbuttons, pilot lights, illuminated
pushbutton, selector switches, key selector
switches and illuminated selector switches.
L6 Switch
+
Flush Bezel
=
Flush Switch
LA9Z-SM61
ø24mm round, plastic (black), panel cut-out ø20.2mm LA9Z-S61B
024mm square, plastic (black), panel cut-out 020.2mm LA9Z-S71B
24 x 30mm rectangular, plastic (black), panel cut-out ø20.2 x
26.2mm LA9Z-S81B
Switch Guard
w/ Flush Bezel
(spring return)
Rectangular, plastic (black) LA9Z-KS8
Flush bezels not applicable for oversize units.
Dimensions (mm)
Pilot Lights (LA*P,) Pushbuttons (LA*B) Illuminated Pushbuttons (LA*L)
7.85
1.45
6.8
OT
Locking Ring
P
Gasket
LOCK
0.6
1.45
6.46.8
5.7
Panel Thickness 0.5 to 6
Anti-rotation Ring
Note:
1. Pushbuttons do not have lamp terminals.
2. Pilot lights have only lamp terminals.
LOCK
R15.5 PC Board Terminal
Width 0.8×0.5t
NC
C
X2
NO
CNO NC
X1
X2
15.8
ø21
17.8
55
2
5.5
1
PC Board Terminal
Tab Terminal Width 2.8×0.5t
1
66
1.2
10.5
2.61 13.5
9369
ø
Solder/Tab Terminal
RectangularRound Square
ø18
24
18
Lever Switches (LA1T) Buzzer (LA3Z)
10.8
24
ø18
LOCK
R15.5
X2 X1
17.8
6
15.8
ø21
2.7
6
2
5.5
10.5 13.5
9369
24
18
Tab Te r m in a l
2.8W×0.5t
2-R0.6
1.2
2.61
PC Board Terminal
0.8W×0.5t
Panel Thickness
0.5 to 6
Emergency Stop Switch (HA1B)
Ø 0.98"
(24.9mm)
Panel Thickness
0.02"-0.24" (0.5~6.0mm)
0.43"
(11mm)
0.98" (25mm)
1.42" (36mm)
0.53"
(13.5mm)
0.41"
(10.5mm)
0.20"
(5.2mm)
0.21"
(5.4mm)
0.34"
(8.7mm)
PCB Terminal
Rubber Washer
Stopper
Locking Ring
ø0.83"
(21mm)
ø0.70"
(17.8mm)
RO.61"
(15.5mm)
NC
0.62"
(15.8mm)
LOCK
+
-
NC
ø16mm - L6 Series
489
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Emergency Stop Switch (HA1E) - Short Body Style
Selector Switches (LA*S,) Illuminated Selector Switches (LA*F,) Key Selector Switches (LA*K)
LOCK
R15.5
NC
C
X2
NO
CNO NC
X1
X2
15.8
ø21
17.8
55
2
5.5
1
PC Board Terminal
Width 0.8×0.5t
TPO
LOCK
0.6
1.45
6.46.8
1
66
10.5 13.5
936 17
9
ø18
18 24
18
Panel Thickness 0.5 to 6
Gasket
Locking Ring
Anti-rotation Ring
Tab Terminal Width 2.8×0.5t Round Square Rectangular
1.2
2.6
1
PC Board Terminal Solder/Tab Terminal
9
26
ø18
18 24
18
Round Square Rectangular
PC Board Drilling Layout (Bottom View)
Panel Cut-Out
Illuminated Pushbuttons,
Illuminated Selector Switches
Pilot Lights, Selector Switches,
Key Selector Switches Pushbutton Lever Switches
ø16.2 +0.2
0
24
24
1.45
6.4 6.8
1
55
ø1.2 Hole
1
55
ø1.2 Hole
7.85
1.45
6.8
1
55
ø1.2 Hole
HA1B E-Stop
PCB Mounting Pattern
0.21"
(5.3mm) 0.21"
(5.3mm)
Ø 0.05"
(1.2mm)
0.21"
(5.4mm)
0.34"
(8.7mm)
ø16mm - L6 Series
490 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Oversize Flush Pushbutton and Pilot Lights
NO
NC
C
NO
NC
X2
X1
C
X2
0.94
[
24.0
]
1
.02
[
25.9
]
0.43
[
11.0
]
Oversize Extended Non-Illuminated Pushbutton
C
NO
NC
0.59
[
15.1
]
Oversize Unibody Pilot Lights
1.48
[
37.5
]
Mushroom Pushbuttons
NCNO
C
NO NC
C
0.79 [20.0]
1.18 [30.0]
Oversize Selector Switch
NO
C
NC
NO
C
NC
0.94 [23.8
0.77 [19.5]
ø16mm - L6 Series
491
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
Oversize Key Switch
C
C
NC
NO
NC
NO
1.54
[
39.0
]
Lever Switch
C
NC
NO
NC
NO
0.94
[
23.8
]
Flush Bezel Flush Bezel with Switch
Round
21.4
20
24
18
ø18
ø24
ø21.4
24
30
18
24
14.8
ø18
ø24
21.4
0.9
27.4
23
0.8
9.8
26 20 20ø
22.6
28.5
28.5
29.3
Mounting
Bracket Gasket
Flush
Bezel Metal Plastic
439
Panel Thickness 0.5 to 5
Square Selector Switches
Illuminated &
Non-illuminated
2
10
Key
2
18.1
Lever
2
17
Rectangular
Flush Bezel Mounting Hole Layout
Round Square Rectangular
24 min.∗
24 min.∗
24 min.∗
24 min.∗
-
0.1
+0.2
20.2
24 min.∗
30 min.∗
20.2
–
0.1
+0.2
ø20.2
–
0.1
+0.2
26.2
–
0.1
+0.2
ø16mm - L6 Series
492 www.idec.com
Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal Blocks
Circuit Breakers
Switches & Pilot Devices
Terminal Confi gurations
Non Illuminated Pushbutton Pilot Lights Illuminated Pushbuttons Buzzer
TOP
NOCNC
NOCNC
Lamp Terminal
(+)
Lamp Terminal
(−)
TOP
X2X2 X1
Lamp Terminal
(+)
Lamp Terminal
(−)
TOP
X2X2 X1
NOCNC
NOCNC
X2X2
X1 X1
QuickSlowSteady
Input
Terminal
(X1)
Input
Terminal
(X2)
Buzzer
Sound
Switch
AL-KH6SP
AL-K6SP
13
10.5
23.5
24
25 minimum
45.5 minimum
Panel Thickness 0.5 to 5
33
34
R22
14
18
45.5 minimum
19 minimum
13
10.5
23.5
AL-D6 AL-DQ6 AL-DH6 H6-VL2 AL-B6
ø24
Waterproof gasket
for dust cover
7.5
0.3 13
7.5
0.3 13
24
Waterproof gasket
for dust cover
7.5
0.3 13
30
24
Waterproof gasket
for dust cover
47 TOP
17.6
4
21
15
26
ø16.5
ø18
AL-BM6 LFTD LED Lamp
Internal Circuit
LED Chip
Protective Diode
Zener Diode
Locking Ring
Gasket
2.5 12
ø17.8
Panel Thickness 0.5 to 6
AL-B6
26
ø16.5
ø18
ø16mm - L6 Series
493
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks Circuit Breakers
Switches & Pilot Devices
General Instructions
Pushbutton Assembly
Lamp Installation
Lamps can be replaced in two ways:
1. If contacts are accessible (or pushbutton not installed in a panel) then it is
easiest to fi rst remove the contacts from the operator. This will allow easy
access to the lamp/lamp-holder assembly. Grab lamp, depress slightly, and
turn counter clockwise. Lamp can then be removed by pushing it back through
the lamp holder.
2. If contacts are not accessible, then the lamp can be replaced by fi rst removing
the lens from the operator. Just pull lens straight out either with a fi ngernail
or optional lens removal tool (MT-101). Lamp/lamp-holder assembly can then
be removed with lamp removal tool (OR-44). Insert lamp removal tool through
operator, depress slightly, turn counter clockwise, then pull lamp/lamp-holder
assembly out. Lamp can then be removed by pushing it back through the lamp
holder.
Engraving Lenses
All buttons and lenses can be engraved directly on the outside surface. Illumi-
nated lenses also allow for engraving on a plate that is underneath the colored
section of the lens. Remove the colored section of the lens by pulling on the
edge while simultaneously unhooking it from the latches on the lens holder. The
marking plate will then be accessible. It can then be engraved or a thin marked
insert (such as mylar or paper) can be sandwiched between the marking plate
and colored section of the lens.
Fitting Grooves
Grooves
Engraving
Surface
Color Lens Marking Plate Lens Holder
Panel Mounting
Before any unit can be mounted into a panel, the contact block must be removed. Slide metal locking lever and pull contact off. Loosen and remove the locking ring
and square anti-rotation ring from the operator and insert operator through panel cutout from the front of the panel. Slide on anti-rotation ring and tighten locking
ring, using locking ring wrench (MT-001). Slide contact block onto operator, observing TOP marking on both parts. Slide metal locking lever in direction indicated by
LOCK. The yellow plastic safety lever lock can then be snapped onto the locking lever; this will prevent vibration or maintenance actions from releasing the contact
from the operator.
PCB Mounting
Being able to separate the contacts from the operator allows for assembly of the
front panel components (operator and lens) to be performed in tandem with the
PC board assembly and soldering. For applications where multiple rows of push-
buttons are mounted closely together, or where other components may obstruct
access to the contact locking lever, be sure to include access holes in the PC
board (refer to PC board layout dimensions for location). Also be sure to allow for
space above and to the side of contact to ensure that no components block the
contact block locking lever. PC board pins are designed to rest on the PCB, take
this into consideration to ensure that pins do not short closely spaced traces.