NVMFS6B14NL Power MOSFET 100 V, 13 mW, 55 A, Single N-Channel Features * * * * * * Small Footprint (5x6 mm) for Compact Design Low RDS(on) to Minimize Conduction Losses Low QG and Capacitance to Minimize Driver Losses NVMFS6B14NLWF - Wettable Flank Option for Enhanced Optical Inspection AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and are RoHS Compliant www.onsemi.com V(BR)DSS RDS(ON) MAX ID MAX 13 mW @ 10 V 100 V 55 A 19 mW @ 4.5 V MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Value Unit Drain-to-Source Voltage VDSS 100 V Gate-to-Source Voltage VGS 16 V ID 55 A Parameter Continuous Drain Current RqJC (Notes 1, 3) Power Dissipation RqJC (Note 1) Continuous Drain Current RqJA (Notes 1, 2, 3) Power Dissipation RqJA (Notes 1 & 2) Pulsed Drain Current TC = 25C Steady State TC = 100C TC = 25C 39 PD TC = 100C TA = 25C Steady State Operating Junction and Storage Temperature Source Current (Body Diode) S (1,2,3) A 11 PD W 3.8 MARKING DIAGRAM 1.9 IDM 140 A TJ, Tstg -55 to + 175 C IS 60 A Single Pulse Drain-to-Source Avalanche Energy (IL(pk) = 2.0 A) EAS 811 mJ Lead Temperature for Soldering Purposes (1/8 from case for 10 s) TL 260 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL RESISTANCE MAXIMUM RATINGS Parameter Symbol Value Unit Junction-to-Case - Steady State RqJC 1.6 C/W Junction-to-Ambient - Steady State (Note 2) RqJA 40 July, 2017 - Rev. 2 D 1 DFN5 (SO-8FL) CASE 488AA STYLE 1 S S S G D XXXXXX AYWZZ D D XXXXXX = 6B14NL (NVMFS6B14NL) or 6B14LW (NVMFS6B14NLWF) A = Assembly Location Y = Year W = Work Week ZZ = Lot Traceability ORDERING INFORMATION 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 3. Maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. (c) Semiconductor Components Industries, LLC, 2016 N-CHANNEL MOSFET 8.0 TA = 100C TA = 25C, tp = 10 ms G (4) W 94 47 ID TA = 100C TA = 25C D (5,6) 1 See detailed ordering, marking and shipping information on page 5 of this data sheet. Publication Order Number: NVMFS6B14NL/D NVMFS6B14NL ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 100 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current V 80 VGS = 0 V, VDS = 80 V mV/C TJ = 25C 25 TJ = 125C 250 IGSS VDS = 0 V, VGS = 16 V VGS(TH) VGS = VDS, ID = 250 mA 100 mA nA ON CHARACTERISTICS (Note 4) Gate Threshold Voltage Threshold Temperature Coefficient VGS(TH)/TJ Drain-to-Source On Resistance RDS(on) 1.0 3.0 -5.8 VGS = 10 V VGS = 4.5 V ID = 20 A V mV/C 10.5 13 15.5 19 mW CHARGES AND CAPACITANCES Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 1680 VGS = 0 V, f = 1 MHz, VDS = 25 V 580 pF 42 VGS = 4.5 V, VDS = 50 V; ID = 25 A 8 Total Gate Charge QG(TOT) Threshold Gate Charge QG(TH) Gate-to-Source Charge QGS Gate-to-Drain Charge QGD 2.0 Plateau Voltage VGP 3.3 td(ON) 11 17 2.2 VGS = 10 V, VDS = 50 V; ID = 25 A nC 4.1 V SWITCHING CHARACTERISTICS (Note 5) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time tr td(OFF) VGS = 4.5 V, VDS = 50 V, ID = 25 A, RG = 1.0 W tf 67.6 ns 14.8 7.2 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25C 0.83 TJ = 125C 0.72 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 20 A 1.2 V 48 VGS = 0 V, dIS/dt = 100 A/ms, IS = 25 A QRR 25 ns 23 53 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 5. Switching characteristics are independent of operating junction temperatures. www.onsemi.com 2 NVMFS6B14NL TYPICAL CHARACTERISTICS 60 VGS = 10 V to 6 V 4.5 V 4.0 V ID, DRAIN CURRENT (A) VDS = 10 V 3.8 V 50 40 3.6 V 30 3.4 V 20 3.2 V ID, DRAIN CURRENT (A) 60 3.0 V 10 50 40 30 20 TJ = 25C 10 TJ = 125C 0 1.0 0.5 2.0 1.5 3.0 2.5 0 4 Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 24 ID = 20 A TJ = 25C 22 20 18 16 14 12 10 8 6 5 4 6 7 8 10 9 VGS, GATE-TO-SOURCE VOLTAGE (V) 5 30 TJ = 25C 25 20 VGS = 4.5 V 15 VGS = 10 V 10 5 10 20 30 40 60 50 70 80 90 100 ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage 100K 2.4 2.2 3 2 VGS, GATE-TO-SOURCE VOLTAGE (V) 26 3 1 VDS, DRAIN-TO-SOURCE VOLTAGE (V) RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) 0 ID = 20 A VGS = 10 V TJ = 150C 2.0 IDSS, LEAKAGE (nA) RDS(on), NORMALIZED DRAIN-TO- SOURCE RESISTANCE TJ = -55C 0 1.8 1.6 1.4 1.2 1.0 0.8 10K TJ = 125C 1K TJ = 85C 100 10 0.6 0.4 -50 -25 1 0 25 50 75 100 125 150 175 0 10 20 30 40 50 60 70 80 90 100 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage www.onsemi.com 3 NVMFS6B14NL TYPICAL CHARACTERISTICS VGS, GATE-TO-SOURCE VOLTAGE (V) 10,000 C, CAPACITANCE (pF) Ciss 1000 Coss Crss 100 10 VGS = 0 V TJ = 25C f = 1 MHz 1 0 10 20 30 40 50 60 70 80 5 4 Qgd Qgs 3 TJ = 25C VDS = 50 V ID = 25 A 2 1 0 2 0 4 6 10 8 12 14 16 18 Figure 7. Capacitance Variation Figure 8. Gate-to-Source Voltage vs. Total Charge IS, SOURCE CURRENT (A) tr td(on) VDS = 50 V ID = 25 A VGS = 4.5 V 1 1 10 10 1 TJ = 125C TJ = 25C TJ = -55C 0.1 0.01 100 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 RG, GATE RESISTANCE (W) VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 100 VGS 10 V Single Pulse TC = 25C IPEAK, DRAIN CURRENT (A) t, TIME (ns) 6 Qg, TOTAL GATE CHARGE (nC) tf ID, DRAIN CURRENT (A) 7 VDS, DRAIN-TO-SOURCE VOLTAGE (V) td(off) 100 8 100 100 1000 9 100 90 1000 10 10 500 ms 10 1 ms 1 10 ms RDS(on) Limit Thermal Limit Package Limit 0.1 1 25C 100C 1 0.1 0.01 0.1 10 10 0.0001 100 0.001 VDS, DRAIN-TO-SOURCE VOLTAGE (V) TAV, TIME IN AVALANCHE (sec) Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. IPEAK vs. TAV www.onsemi.com 4 0.01 NVMFS6B14NL TYPICAL CHARACTERISTICS 100 50% Duty Cycle R(t) (C/W) 10 1 20% 10% 5% 2% 1% 0.1 NVMFS6B14NL, 650 mm2, Cu Single Layer Pad Single Pulse 0.01 0.001 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 PULSE TIME (sec) Figure 13. Thermal Response DEVICE ORDERING INFORMATION Marking Package Shipping NVMFS6B14NLT1G 6B14NL DFN5 (Pb-Free) 1500 / Tape & Reel NVMFS6B14NLWFT1G 614LLW DFN5 (Pb-Free, Wettable Flanks) 1500 / Tape & Reel NVMFS6B14NLT3G 6B14NL DFN5 (Pb-Free) 5000 / Tape & Reel NVMFS6B14NLWFT3G 614LLW DFN5 (Pb-Free, Wettable Flanks) 5000 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 5 NVMFS6B14NL PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO-8FL) CASE 488AA ISSUE M 2X 0.20 C D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. A 2 B D1 2X 4X E1 q E 2 c 1 2 MILLIMETERS DIM MIN NOM MAX A 0.90 1.00 1.10 A1 0.00 --- 0.05 b 0.33 0.41 0.51 c 0.23 0.28 0.33 5.00 5.30 D 5.15 D1 4.70 4.90 5.10 D2 3.80 4.00 4.20 6.00 6.30 E 6.15 E1 5.70 5.90 6.10 E2 3.45 3.65 3.85 e 1.27 BSC G 0.51 0.575 0.71 K 1.20 1.35 1.50 L 0.51 0.575 0.71 L1 0.125 REF M 3.00 3.40 3.80 q 0_ --- 12 _ STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 0.20 C 3 A1 4 TOP VIEW C SEATING PLANE DETAIL A 0.10 C A 0.10 C SIDE VIEW RECOMMENDED SOLDERING FOOTPRINT* DETAIL A 2X 0.495 0.10 b C A B 0.05 c 4.560 2X 8X 1.530 e/2 e L 1 4 3.200 K 4.530 E2 PIN 5 (EXPOSED PAD) L1 1.330 2X M 0.905 1 0.965 G D2 4X BOTTOM VIEW 1.000 4X 0.750 1.270 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NVMFS6B14NL/D