SEMTECH CORP 34E D MM 8139339 0002303 2e2b MBSET CENTER TAPS AND DOUBLERS (23-07 ABSOLUTE MAXIMUM RATINGS (@25C UNLESS OTHERWISE SPECIFIED) Device Reverse Average Forward Current Repet- 1Cycle | Reverse Forward Reverse Thermal | Case Type Voltage (5) itive Surge | Recovery Voltage Current |impedance| Outline Surge Current (1) (2) Current | tp=8.3ms (3) Vawa | Vanw te (AV) @ Te Ir (AV) @ Ta Iram {rsm Ter VE @lr In In Ouc 25C | 55C (100C | 25C | 55C @25C @25C |@100C Volts | Volts j{Amps|AmpsjAmps | Amps | Amps Amps Amps ns Volts | Amps HA pA C/W LOW VOLTAGE (1000V) SC*AR4 SC*ARS SC*AROSFF NOTES: Operating and Storage Temp. Range = -55C fo +150C except where shown Add code for configuration: ##= 10 or * = D for Doubler (A) Operating and Storage Temperature Range = -55C to +175C 08 N for Negative Center Tap (1) Ratings at Case Temperature Tc 06 P for Positive Center Tap (2) Ratings at Ambient Temperature Ts (3) Measured on discrete devices prior to assembly (4) Rating at Oil Temperature To (5) Average Rectified Current = 0.5 x fe(AV) for Doubler SEMTECH CORPORATION 15SEMTECH CORP 34E D MM 8139139 0002304 1be MBSET G24 G25 G26 T-23-07 NOTES 1 TERMINAL LAYOUT SHOWN FOR DOUBLER CATHODE TERMINALS PERPENDICULAR TO UNIT AXIS 2 TERMINALS SUITABLE FOR 25 FASTON CONNECTORS OR SOLDERING D f E G _ G27A G51 NOTES: 1. TWO PLACES 2. THREE PLACES + E Te Y Dd SLOT FOR 2 20AWG WIRES A J Y 4 AN eo B I l NOTES CONFIGURATION AND POLARITY SHOWN BY COLORED DOTS POSITIVE CENTER TAP RED DOT ON POSITIVE TERMINAL NEGATIVE CENTER TAP BLACK DOT ON NEGATIVE TERMINAL BOUBLER ~ RED, POSITIVE; BLACK, NEGATIVE, YELLOW, AC