Bridge Rectifiers VJ248M - VJ1048M A Dim. Inches C Minimum Maximum Minimum Maximum Notes F D A B C D E F G H J B G Millimeter E (+) AC AC (-) H .137 .411 .600 .295 .076 .545 .076 .167 .441 .620 .310 .096 .555 .096 1.0 Min. .195 .215 3.84 10.44 ------13.85 .970 25.40 4.95 2.21 11.20 ------14.10 1.07 Min. 5.46 Dia. J Microsemi Catalog Number Peak Reverse Voltage VJ248M VJ448M VJ648M VJ848M VJ1048M 200V 400V 600V 800V 1000V 10 Amps DC Output 100 Amp Surge Current V RRM to 1000V 2000V Isolation Glass Passivated Die ROHS Compliant Electrical Characteristics DC current output Maximum surge current Max. I2 t for fusing Max. peak forward voltage per leg Max. peak reverse current per leg l o 10 Amps l FSM 100 Amps I2 t 41 A2 s V FM 1.3 Volts l RM 5A T C = 95C 8.3ms, half sine I FM = 1.0A:TJ = 25C * V RRM,TJ = 25C *Pulse test: Pulse width 300sec, Duty cycle 2% Thermal and Mechanical Characteristics Storage temperature range Operating junction temp range Maximum thermal resistance Mounting torque Weight T STG TJ ROJC -55C to 175C -55C to 175C 3C/W Junction to case 12-15 inch pounds (#6 screw) .14 ounces (4.5 grams) typical www.microsemi.com October, 2012 - Rev. 4 VJ248M - VJ1048M Maximum Allowable Case Temperature - C Figure 1 Typical Forward Characteristics - Per Leg 100 150 C 10 25 C Figure 3 Forward Current Derating - Per Leg 180 160 140 120 100 80 60 40 0 2 4 6 8 10 12 14 16 18 20 Instantaneous Forward Current - Amperes DC Forward Current - Amperes 1.0 0.1 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 Instantaneous Forward Voltage - Volts Figure 2 Typical Reverse Characteristics - Per Leg Typical Reverse Current - mA 10 1.0 .1 150 C .01 125 C .001 25 C .0001 0 200 400 600 800 1000 Reverse Voltage - Volts www.microsemi.com October, 2012 - Rev. 4 DISCLAIMER The information contained in the document (unless it is publicly available on the Web without access restrictions) is PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement will also apply. This document and the information contained herein may not be modified, by any person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by Microsemi in writing signed by an officer of Microsemi. Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. This product has been subject to limited testing and should not be used in conjunction with lifesupport or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or customers final application. User or customer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the customer's and user's responsibility to independently determine suitability of any Microsemi product and to test and verify the same. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp Life Support Application Seller's Products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the Seller's Product could create a situation where personal injury, death or property damage or loss may occur (collectively "Life Support Applications"). Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations that Seller was negligent regarding the design or manufacture of the goods. Buyer must notify Seller in writing before using Seller's Products in Life Support Applications. Seller will study with Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the new proposed specific part. www.microsemi.com October, 2012