Terminal Blocks - Single Row Series A5000 & Series CB5000 Single Row Terminal Blocks A50110507 SPECIFICATIONS Rating: 10A, 300V* Center Spacing: 0.250" (6.35mm) Wire Range: #18-30 AWG CU Screw Size: #3-48 zinc-plated philslot SEMS screws, wireready standard Torque Rating: 4 lb-in. Distance Between Barriers: 0.20" (5.08mm) Recommended PCB Hole Diameter: 0.062" (1.57mm) Operating Temperature: 105C (221F) max., -40C (-40F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 1600V rms Agency Information: UL File E62622; CE Certified * Max. rating shown; some options may be rated lower - consult factory. CB50220807 Dimensions - in (mm) A5000 Series Poles 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 MOUNTING ENDS A B Mount Overall Centers Length 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 6.75 7.00 7.25 - - 1.06 1.31 1.56 1.81 2.06 2.31 2.56 2.81 3.06 3.31 3.56 3.81 4.06 4.31 4.56 4.81 5.06 5.31 5.56 5.81 6.06 6.31 6.56 6.81 7.06 7.31 7.56 - - BARRIER ENDS A B Pole Overall Centers Length 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 6.75 7.00 7.25 0.56 0.81 1.06 1.31 1.56 1.81 2.06 2.31 2.56 2.81 3.06 3.31 3.56 3.81 4.06 4.31 4.56 4.81 5.06 5.31 5.56 5.81 6.06 6.31 6.56 6.81 7.06 7.31 7.56 #3-48 screw 0.250 (6.35) 0.12 (3.0) O 0.43 (10.9) B Mount End Barrier End 0.50 (12.7) 0.25 (6.35) 0.025 (0.64) A Mount End Barrier End CB5000 Series #3-48 screw 0.250 (6.35) 0.12 (3.0) O 0.50 (12.7) * Dimensions in inches. To convert to millimeters, multiply by 25.4. B Mount End Barrier End 0.50 (12.7) 0.025 (0.64) Mount End A Barrier End Terminal Blocks - Single Row Part Numbering System Series Terminal Style Base/End Poles Screw Options Options A 5 C B 5 01 02 03 04 1 - mount end 2 - barrier end 02 to 30 02 to 28 on mount end base 07 - steel SEMS std. wire ready C1 to C8 - 0.110 QC L1 to L6 marking options (pg 22) LT1 to LT6 marking options (CB5 only-pg 22) MP - mounting plate 0.120 dia *OJ - over barrier jumper S1 - single solder lug/flat S2 - double solder lug/flat (A5 only) *Contact factory for configuration A5 - standard barrier CB5 - closed back - handwired - printed circuit - non feed-thru - wire wrap tail Terminal Styles Inches (Millimeters) 0.16 (4.1) 0.40 (10.2) 0.10 (2.54) 0.055 (1.40) 0.025 (.64) 0.50 (12.7) 0.14 (3.6) 0.12 (3.0) 01 Handwired 0.032 (0.81) 02 Circuit Board 0.045 (1.14) 03 Non Feed-Thru CB5 Terminal Exit Options 0.025 (0.64) 0.12 (3.0) 04 Wire Wrap Tail Inches (Millimeters) 0.12 (3.0) Exit Rear (std.) Screw Options Wire ready screws standard on all terminal styles 07 Steel SEMS Zinc-Plated (B001-7035-J) 07 Standard Wire Ready Hardware Options Jumpers (Bulk ordering part numbers are in parentheses.) (Bulk ordering part numbers are in parentheses.) Quick Connects Blade Width 0.110" (For other orientations, contact factory.) Inches (Millimeters) Solder Lugs 0.56 (14.3) (OJ12-J) (5C1-J)* (5C2-J)* (5C4-J)* S1 (5S1-J) 1.12 (28.4) C7 (5C7-J) * N/A on CB5 Series. C8 (5C8-J) S2 (5S2-J) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Eaton: A50220907 CB50220207 CB50221607