Commercial CCR-33 Miniature DC-18GHz SPDT Switch Latching The CCR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA connectors. The CCR-33 series switch is offered with either a failsafe or latching actuator. This design is compatible with the two most common mounting hole patterns. The CCR-33 series switch is interchangeable with a variety of switches. Specifications RF Contacts: Break before make Actuator Voltage (VDC) 20O C 12 Current (mA) 140 115 65 Switching Time: 10 msec max Connectors: SMA (f) Weight: 1.65 oz. max 15 28 Temperature Range: -40O C to +65O C (Operating) Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating) Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating) Humidity: Moisture Seal Available MTBF: 7.3 Million Hours ( MIL-HDBK-217F Fixed, 25O C, <1 Cycle per hour) RF Power Handling 3000 Typical Performance Return Loss 800 Power CW (Watts) 400 200 80 15 Sta nda rd S MA 40 10 0.1 Co nne 25 cto rs 1.0 4.0 Frequency GHz 10 0.01 18 Frequency GHz Isolation dB 0.0 0.4 VSWR (max) Insertion Loss (min) Isolation (max) DC-6 GHz 6-12 GHz 12-18 GHz 1.25:1 0.20 dB 70.0 dB 1.40:1 0.40 dB 60.0 dB 60 IL dB Specifications 18.0 70 1.50:1 0.50 dB 60.0 dB 80 90 0.01 Specifications subject to change without notice. Frequency GHz 18.0 www.teledynecoax.com email: coax@teledyne.com Tel: (800) 351-7368 10/2007 Commercial CCR-33 Miniature DC-18GHz SPDT Switch Latching Indicators TTL Analog H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL Optional Narrow Width Body Standard Width Body Part Numbering System for CCR-33 (Latching) CCR-33 S 6 C - N Series Options Connectors Actuator Type Actuator Voltage Connector S: SMA Female # Actuator Voltage 6: 28Vdc Latching # 7: 15Vdc Latching # 8: 12Vdc Latching # For other options contact Factory Actuator Type O: No Indicator Contacts # C: Indicator Contacts # D: Self Cutoff Only E: Indicators and Self Cutoff Specifications subject to change without notice. Options T: TTL Drivers with Diodes N: Narrow Body # R: Positive + Common #: Stock item subject to prior sale www.teledynecoax.com email: coax@teledyne.com Tel: (800) 351-7368 10/2007