J
Series HP03 6mm SMT Tactiles
J16
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
Electrical Capacity (Resistive Load)
Power Level (silver): 3VA maximum @ 28V DC maximum
(Applicable Range 10mA ~ 125mA @ 0.1V ~ 28V)
Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: See Supplement for further explanation of operating range.
Other Ratings
Contact Resistance: 100 milliohms maximum
Insulation Resistance: 100 megohms minimum @ 100V DC
Dielectric Strength: 250V AC minimum for 1 minute minimum between contacts & between contacts & case
Mechanical Life: 500,000 operations minimum
Electrical Life: 500,000 operations minimum
Nominal Operating Force: 1.60N
Total Travel: .008” (0.2mm)
Materials & Finishes
Actuator: Glass fiber reinforced polyamide (UL94V-0)
Case: Stainless steel
Base: Glass fiber reinforced polyamide (UL94V-0)
Movable Contacts: Stainless steel with silver or gold plating
Stationary Contacts: Brass with silver or gold plating
Terminals: Brass with silver or gold plating
Environmental Data
Operating Temperature Range: –20°C through +70°C (–4°F through +158°F)
Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
Shock: 100G (981m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Processing
Soldering: Reflow Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards: UL94V-0 actuator and base
These switches are designed for use in a low-voltage, low-current circuit.
When used as intended, the results do not produce hazardous energy.
General Specifications
J
Series HP03
6mm SMT Tactiles
J17
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
.244” (6.2mm) square body allows compact mounting.
Heat resistant resin body meets lead-free
solder processing requirements and UL
flammability rating of 94V-0.
Stick-tube and tape-reel packaging
allow rapid automated placement
of devices.
Gold plated contacts available for very
low voltage/current applications offer
advantages of little or no oxidization or
sulfurization and stable contact resistance.
Gull-winged terminals ensure mechanical stability during
soldering and simplified solder joint inspection.
Insert molded terminals lock out flux, solvents, and other contaminants
and allow automated soldering.
Tape-reel packaging meets EIA-481-D Standard.
Coplanarity: all considered surfaces must lie between two parallel planes that are
a maximum distance apart of .0039” (0.10mm). (Additional coplanarity details in
Terms and Acronyms in the Supplement section.)
Actual Size
Distinctive Characteristics
J
Series HP03 6mm SMT Tactiles
J18
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries Pushbuttons
Illuminated PB
Slides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
TYPICAL SWITCH ORDERING EXAMPLE
POLE & CIRCUIT
Actuator Position
( ) = Momentary Switch Throw & Schematic
Pole Model
Normal Down
Note: Terminal numbers are
not actually on the switch.
SP HP0315A OFF (ON)
1
2
3
4
SPST
TYPICAL SWITCH DIMENSIONS
Gull-winged
HP0315AFKP4
SPST OFF-(ON) Circuit and
Normally Open Contacts
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
HP0315AFKP4-R
Flat Black Button Gold Contacts with
0.4VA Rating
Gull Wing Terminals
for Upright Mount
Packaging
S
Stick-Tube
100 Pieces/
Tube
R
Tape-Reel
1,000 Pieces/
Reel
Tape-Reel Packaging
Pole & Circuit
15A SPST OFF (ON)
( ) = Momentary
Normally Open Contacts
15A P4
HP03
Terminals & Contacts
P2 Gull Wing for Upright Mount;
Silver Contacts Rated 3VA max. DC
P4
Gull Wing for Upright Mount;
Gold Contacts Rated 0.4VA max. @
28V AC/DC max.
F K R
Actuator
FFlat Button
Actuator Color
KBlack
(1.4) Typ
.055
(2.2) Typ
.087
(9.0)
.354
(4.5)
.177
1
3
2
4
(0.7) Ty
p
.028
(4.5)
.177
13
24
(0.8)
.031
(4.4)
.173
(9.0)
.354
(0.5) Max
.020
(0.3) Typ
.012
(0.5)
.020
(3.5) Dia
.138
(6.2)
.244
(6.2)
.244
J
Series HP03
6mm SMT Tactiles
J19
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable Rockers
Touch Tilt Toggles
www.nkkswitches.com
PACKAGING
KEYBOARD MATRIX
Switches must be or-
dered in 1,000-piece
increments when
tape-reel packaging
is selected.
Packaging meets
EIA-481-D Standard.
RTape-Reel
Switches must be
ordered in 100-
piece increments
when stick-tube
packaging is
selected.
SStick-Tube
Tape-Reel Dimensions
Each tape-reel of 1,100 pockets contains 1,000 switches.
Minimum Leader Length: 15.748” (400mm). Minimum Trailer Length: 6.299” (160mm).
(10.5)
Typ
.413
(2.0) Typ
.079
Overall Dia (330.0)
13.0
(6.5) R
.256
(16.4)
.646
(80.0) Dia
3.150
(22.4) Ma
x
.882
Stick-Tube Dimensions
Each stick-tube
contains 100 switches
(12.5)
.492
(10.5)
.413
(660.0)
(6.5)
.256
3
ϒ Max
(0.4)
.016
(3.0)
.118
(4.6)
.181
(5.1)
.201
(16.0)
.630
(1.75)
.069
(7.5)
.295
(12.0) Typ
.472
(2.0) Typ
.079
(4.0) Typ
.157
(1.5) Dia Typ
.059
Direction of Feed
123
65
4
789
B
0
A
9
13
10
6
11
8
12
72
1
3
4
5
1
2
3
4
5
6
7
8
9
0
A
B
1234 5678910111213
= ON
Keys (Switches)
PC Terminations 123
65
4
789
B
0
A
1
2
6
7
34
5
1
2
3
4
5
6
7
8
9
0
A
B
1234 567
= ON
Keys (Switches)
PC Terminations
Common Bus Matrix
These single pole, single throw switches can be used in a key-
board matrix and, using strapped terminals, achieve a com-
mon bus electrical configuration on a single-sided PC board.
X-Y Matrix
These single pole, single throw switches can be
arranged on a single-sided PC board matrix
with strapped terminals to achieve an X-Y type
electrical interconnection.
Red = PCB Trace Black = Switch Circuit