ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " UM Radial Lead Type, High Voltage series UM High voltage type (2.7V). Suitable for quick charge and discharge. Wide temperature range (- 25 to +70C). Compliant to the RoHS directive (2011/65/EU). Smaller UW Specifications Performance Characteristics Item Category Temperature Range - 25 to +70C Rated Voltage Range 2.7V Rated Capacitance Range 1 to 47F See Note Capacitance Tolerance 20% , 20C Leakage Current 0.5C (mA) [ C : Rated Capacitance(F)] (After 30 minutes' application of rated voltage : 2.7V) Stability at Low Temperature Capacitance (- 25C) / Capacitance (+20C) x100 ESR, DCR* Refer to the table below (20C). *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 70C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after storing the capacitors under no load for 1000 hours at 70C. Capacitance change Shelf Life Marking Printed with white color letter on black sleeve. 70% Within 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value ESR Leakage current Within 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value ESR Leakage current Drawing Type numbering system (Example : 2.7V 10F) (P.E.T. (P.E.T. ) ) Sleeve Sleeve d d 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 910101111 Configuration Configuration P0.5 P0.5 D+0.5MAX D+0.5MAX J JUUMMTT1 1 1 10 06 6MMHHDD Sleeve (P.E.T.) Capacitance tolerance (20%) Capacitance tolerance (20%) d 1 3 4 5 6 7 8 9 10 11 MINMIN 1515 4MIN 4MIN (mm) (mm) 88 Configuration Configuration (D (D << 10) 10) 1.5 1.5 (D (D 10) 10) 2.0 2.0 1010 12.5 12.5 1616 1818 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 P P 3.5 Pressure relief vent D D 0.6 0.8 0.6 0.6 0.6L+ 0.6 0.8 0.8 0.8 dd 0.6 MAX. 15MIN 4MIN In In case case L>25 L>25 forfor thethe 12.5 12.5 diadia unit, unit, lead lead diadia d=0.8 d=0.8 (D < 10) 1.5 *D Please for end16 seal configuration. 6.3refer 8to page 10 2012.5 18 (D 10) 2.0 P 2.5 3.5 5.0 5.0 7.5 7.5 ESR ESR Rated0.6 d Voltage 0.5 0.6 Rated 0.6 0.8 0.8 Rated Rated Voltage DCR DCR () () Capacitance Capacitance Code Code Typical () () In case) L>25 for the (F) 12.5 ( Code ( Code ) 1kHz) 1kHz) Typical (F) dia unit, lead dia d=0.8 (at(at Rated Voltage 2.7V) ( 2.7V Code (T1) (T1) 2.7V (T1) Rated voltage (2.7V) Rated voltage (2.7V) Pb-free Pb-free lead lead finishing finishing Pb-free Pb-free PET PET sleeve sleeve Rated capacitance (10 F) 8 81010 PDPD Rated voltage (2.7V) 12.5 12.5 to to 1818 HDHD Series name Type (mm) Dimensions Rated capacitance Rated capacitance (10(10 F)F) Series name Series name Configuration Type Type Capacitance tolerance (20%) P0.5 D+0.5MAX MAX. MAX. L+ L+ D D 2 J UM T 1 1 0 6 MHD Pressure Pressure relief relief vent vent Configuration Case Case size size D D L L (mm) (mm) 0.47 0.47 1.0 1.0 2.2 2.2 Rated 3.3 3.3 Capacitance 4.7 4.7 (F) 10 110 22 22 2.2 33 33 3.3 47 47 4.7 474 474 105 105 225 225 335 335 Code 475 475 106 106 105 226 226 225 336 336 335 476 476 475 44 22 22 ESR 11 () 0.4 (at0.4 1kHz) 0.2 20.2 0.2 20.2 0.1 10.1 0.1 0.1 0.4 66 33 1.3 1.3 1.0 1.0 DCR Typical 0.6 0.6() 0.25 0.25 3 0.13 0.13 1.3 0.08 0.08 1.0 0.06 0.06 0.6 6.3 6.3 9 9 88 11.5 11.5 88 20 20 1010 size 20 20 Case x L 20 12.5 D12.5 (mm) 20 12.5 12.5 11.5 31.5 8x31.5 16816 x31.5 20 31.5 18 x 31.5 20 31.5 1018 1818 x40 20 40 12.5 10 22 33 47 106 226 336 476 0.2 0.2 0.1 0.1 0.25 0.13 0.08 0.06 12.5 x 31.5 16 x 31.5 18 x 31.5 18 x 40 D Pb-free lead finishing Pb-free PET sleeve 6.3 ED 8 10 PD 12.5 to 18 HD Note : The capacitance calculated from discharge time (T) with constant current ( i ) after 30minuite charge with rated voltage (2.7V). The discharge current ( i ) is 0.01 x rated capacitance (F). The discharge time (T) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i x T The listed DCR value is typical and therefore not a guaranteed value. CAT.8100D