Document 816 Flyback Transformers For TI TPS23754 PoE Interface * Developed for Texas Instruments TPS23754 High Power, High Efficiency PoE Interface and DC/DC Controller * Input: 33 - 57 V * 1500 Vrms isolation from primary and bias to secondary Core material Ferrite Terminations RoHS tin-silver (96.5/3.5) over tin over nickel over phos bronze. Weight 12.0 g Ambient temperature -40C to +125C Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 175 per 13 reel Plastic tape: 44 mm wide, 0.4 mm thick, 28 mm pocket spacing, 11.9 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf L at 0 A2 L at Ipk3 DCR max (Ohms)4 Turns ratio6 Part 10% min Leakage L5 number1 (H) (H) pri sec bias drive max (H) pri : sec pri : bias pri : drive JA4372-AL_ JA4387-AL_ 75 75 67.5 66.0 0.143 0.0045 0.122 0.072 0.077 0.0098 0.096 0.070 1. When ordering, please specify a packaging code: JA4387-ALD Packaging: D = 13 machine ready reel. EIA-481 embossed plastic tape (175 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance is measured at 250 kHz, 0.1 Vrms, 0 Adc. 3. Peak primary current drawn at minimum input voltage. 3.0 0.756 1 : 0.08 1 : 0.25 1 : 0.28 1 : 0.25 1 : 0.16 1 : 0.15 Ipk3 (A) Output7 2.2 2.2 3.3 V, 7.6 A 12 V, 2.08 A 4. DCR for the primary and the secondary is measured with windings connected in parallel. 5. Leakage inductance is for the primary, measured with the windings connected in parallel and the secondary windings shorted. 6. Turns ratio is with the primary windings and secondary windings connected in parallel. 7. Output is with the secondary windings connected in parallel. Output of the drive winding is 6 V, 10 mA. Output of the bias winding is 11.2 V, 20 mA. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Primary windings and secondary windings to be connected in parallel on PC board Dimensions are in inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 816 Revised 10/09/13 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: JA4372-ALB JA4387-ALD JA4387-ALB JA4372-ALD