DATA SH EET
Product specification
Supersedes data of 2000- 08 -29
File under BCcomponents, BC05
2001 Jun 22
BCcomponents
MMKP 383
AC and pulse double
metall ized polypropylene film
capacitors
2001 Jun 22 2
BCcomponents Product specification
AC and pul se double
metallized polypropylene film capacitors MMKP 383
MMKP RADIAL POTTED TYPE PITCH 15/22.5/27.5 mm
PITCH 7.5 m m (bent back leads)
296x12(full_width)
P= 7.5 (bent back)
and 15 mm P = 22.5 and
27.5 mm
CBA751
Fig.1 Simplified outlines.
FEATURES
•7.5 mm bent back pitch
•15 to 27.5 mm lead pitch
•Low contact resistance
•Low loss dielectric
•Small dimensions for high density
packaging
•Supplied loose in box and taped on
reel.
APPLICATIONS
•Elec tronic lig hting e.g. Ballast
•Motor control circuits
•S - correction
•Where steep pulses occur e.g. SMPS
(switch mode power supplies)
•For flyback applications please use
1400 V series
•For hot asphalt encapsulation
process.
DETAIL SPECIFICATION
For more detailed data and test
requirements see “Type detail
specification HQN-384-17/106”.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E24 series) 0.001 to 2.7 µF
Capacitance tol erance ±5%
Rated (DC) voltage 250 V; 400 V; 630 V; 1000 V;
1400 V;1600 V; 2000 V; 2500 V
Rated (AC) voltage 125 V; 200 V; 220 V; 350 V;
500 V; 550 V; 700 V; 900 V
Rated peak-to-peak vol tage 350 V; 560 V; 630 V; 1000 V;
1400 V; 1600 V; 2000 V; 2500 V
Climatic category 55/105/56
Rated te mperature (DC) 85 °C
Rated temperature (AC) 105 °C
Maximum applic ation temperatu re 105 °C
Reference specification IEC 60384-17
Perf orm ance grade grade 1 (long life)
Stability grade grade 2
Materials qualified in accordanc e with UL94 V-0
2001 Jun 22 3
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
COMPOSITI ON OF CATALOGUE NUMBER
TYPE AND PITCHES
383
15.0/7.5 mm
15.0 mm
22.5 mm
27.5 mm
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL 250 V 400 V 630 V 1000 V
383 loose in box lead length 3.5 mm ±5% 00 10 20 30
taped on reel bent back leads
reel diameter 500 mm ±5% 03 13 23 33
ON REQUEST
383
loose in box lead length 5.0 mm ±5% 01 11 21 31
lead length 25.0 mm ±5% 04 14 24 34
taped on reel ±5% 02 12 22 32
taped on reel bent back leads
reel diameter 356 mm
for hot asphalt encapsulation ±5% −−−−
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
2222 383 XX XX X
Example:
104 =10 x 10 =100 nF
2001 Jun 22 4
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
TYPE AND PITCHES
383
15.0/7.5 mm
15.0 mm
22.5 mm
27.5 mm
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL 1400 V 1600 V 2000 V 2500 V
383 loose in box lead length 3.5 mm ±5% 40 50 60 70
taped on reel bent back leads
reel diameter 500 mm ±5% 43 53 63 −
ON REQUEST
383
loose in box lead length 5.0 mm ±5% 41 51 61 71
lead length 25.0 mm ±5% 44 54 64 74
taped on reel ±5% 42 52 62 72
taped on reel bent back leads
reel diameter 356 mm
for hot asphalt encapsulation ±5% 46 56 66 −
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
2222 383 XX XX X
Example:
104 =10 x 10 =100 nF
2001 Jun 22 5
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.15 µF≤5×10−4≤20 ×10−4
0.15 µF<C≤0.39 µF≤5×10−4≤25 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC ):
C≤0.15 µF450 V/µs
0.15 µF<C≤0.39 µF 900 V/µs
R between leads, for C ≤1µF at 100 V; 1 minute >100000 MΩ
R between leads and case; 100 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 50 pC peak discharge >220 V
Withstanding (DC) voltage (cut off current 10 m A); rise time 100 V /s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 00... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 01... on request
lt=25.0 ±2.0 mm ±5% 2222 383 04... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 02... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±5% 2222 383 03... preferred
296x12(full_width)
CBA750
b
Ødt
l
P
h
lt
l
hh'
b
Ødt
H
F
10
F' (1)
15
Fig.4 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
2001 Jun 22 6
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =250 V; URac =125 V; Up-p =350 V
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIA METER =500 mm
lt=3.5 ±0.3 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.082 5.0 ×11.0 (13.0) ×17.5 1.2 2222 383 00823 .. 03823
0.091 2222 383 00913 .. 03913
0.1 2222 383 00104 .. 03104
0.11
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 00114 .. 03114
0.12 2222 383 00124 .. 03124
0.13 2222 383 00134 .. 03134
0.15 2222 383 00154 .. 03154
0.16 7.0 ×13.5 (15.5) ×17.5 2.0 2222 383 00164 .. 03164
0.18 2222 383 00184 .. 03184
0.2 2222 383 00204 .. 03204
0.22
8.5 ×15.0 (17.0) ×17.5 2.7
2222 383 00224 .. 03224
0.24 2222 383 00244 .. 03244
0.27 2222 383 00274 .. 03274
0.3 2222 383 00304 .. 03304
0.33 10.0 ×16.5 (18.5) ×17.5 3.3 2222 383 00334 .. 03334
0.36 2222 383 00364 .. 03364
0.39 2222 383 00394 .. 03394
2001 Jun 22 7
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
0.39 µF<C≤0.56 µF≤10 ×10−4≤45 ×10−4
0.56 µF<C≤0.82 µF≤10 ×10−4≤50 ×10−4
0.82 µF<C≤1.2 µF≤10 ×10−4≤65 ×10−4
1.2 µF<C≤1.8 µF≤15 ×10−4≤75 ×10−4
1.8 µF<C≤2.2 µF≤15 ×10−4≤85 ×10−4
2.2 µF<C≤2.7 µF≤15 ×10−4≤95 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC ):
P=22.5 mm 290 V/µs
P=27.5 mm, for 0.82 µF<C≤2µF 190 V/µs
P=27.5 mm, for 2 µF<C≤2.7 µF 130 V/µs
R between leads, for C ≤1µF at 100 V; 1 minute >100000 MΩ
RC between leads, for C >1µF at 100 V; 1 minute >100000 s
R between leads and case; 100 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 50 pC peak discharge >220 V
Withstanding (DC) voltage (cut off current 10 m A); rise time 100 V /s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 00... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 01... on request
lt=25.0 ±2.0 mm ±5% 2222 383 04... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 02... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.5 Outline.
2001 Jun 22 8
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =250 V; URac =125 V; Up-p =350 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.43 7.0 ×16.5 ×26.0 3.5 2222 383 00434
0.47
8.5 ×18.0 ×26.0 4.8
2222 383 00474
0.51 2222 383 00514
0.56 2222 383 00564
0.62 2222 383 00624
0.68 10.0 ×19.5 ×26.0 6.0 2222 383 00684
0.75 2222 383 00754
0.82 2222 383 00824
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.91
11.0 ×21.0 ×31.0 8.4
2222 383 00914
1.0 2222 383 00105
1.1 2222 383 00115
1.2 2222 383 00125
1.3 13.0 ×23.0 ×31.0 11.0 2222 383 00135
1.5 2222 383 00155
1.6 2222 383 00165
1.8 15.0 ×25.0 ×31.0 13.6 2222 383 00185
2.0 2222 383 00205
2.2 18.0 ×28.0 ×31.0 18.5 2222 383 00225
2.4 2222 383 00245
2.7 2222 383 00275
2001 Jun 22 9
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.22 µF≤5×10−4≤20 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC ):
C≤0.082 µF600 V/µs
0.082 µF<C≤0.22 µF 1200 V/µs
R between leads, for C ≤1µF at 100 V; 1 minute >100000 MΩ
R between leads and case; 100 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 50 pC peak discharge >220 V
Withstanding (DC) voltage (cut off current 10 m A); rise time 100 V /s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 10... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 11... on request
lt=25.0 ±2.0 mm ±5% 2222 383 14... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 12... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±5% 2222 383 13... preferred
296x12(full_width)
CBA750
b
Ødt
l
P
h
lt
l
hh'
b
Ødt
H
F
10
F' (1)
15
Fig.6 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
2001 Jun 22 10
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =400 V; URac =200 V; Up-p =560 V
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIA METER =500 mm
lt=3.5 ±0.3 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.047 5.0 ×11.0 (13.0) ×17.5 1.2 2222 383 10473 .. 13473
0.051 2222 383 10513 .. 13513
0.056 2222 383 10563 .. 13563
0.062
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 10623 .. 13623
0.068 2222 383 10683 .. 13683
0.075 2222 383 10753 .. 13753
0.082 2222 383 10823 .. 13823
0.091 7.0 ×13.5 (15.5) ×17.5 2.0 2222 383 10913 .. 13913
0.1 2222 383 10104 .. 13104
0.11 2222 383 10114 .. 13114
0.12
8.5 ×15.0 (17.0) ×17.5 2.7
2222 383 10124 .. 13124
0.13 2222 383 10134 .. 13134
0.15 2222 383 10154 .. 13154
0.16 2222 383 10164 .. 13164
0.18 10.0 ×16.5 (18.5) ×17.5 3.3 2222 383 10184 .. 13184
0.2 2222 383 10204 .. 13204
0.22 2222 383 10224 .. 13224
2001 Jun 22 11
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
0.22 µF<C≤0.33 µF≤10 ×10−4≤35 ×10−4
0.33 µF<C≤0.43 µF≤10 ×10−4≤40 ×10−4
0.43 µF<C≤0.68 µF≤10 ×10−4≤50 ×10−4
0.68 µF<C≤0.82 µF≤10 ×10−4≤55 ×10−4
0.82 µF<C≤1.2 µF≤10 ×10−4≤60 ×10−4
1.2 µF<C≤1.5 µF≤10 ×10−4≤65 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC ):
P=22.5 mm 410 V/µs
P=27.5 mm; for 0.43 µF<C≤1.1 µF 260 V/µs
P=27.5 mm; for 1.1 µF<C≤1.5 µF 180 V/µs
R between leads, for C ≤1µF at 100 V; 1 minute >100000 MΩ
RC between leads, for C >1µF at 100 V; 1 minute >100000 s
R between leads and case; 100 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 50 pC peak discharge >220 V
Withstanding (DC) voltage (cut off current 10 m A); rise time 100 V /s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 10... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 11... on request
lt=25.0 ±2.0 mm ±5% 2222 383 14... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 12... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.7 Outline.
2001 Jun 22 12
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =400 V; URac =200 V; Up-p =560 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.24 7.0 ×16.5 ×26.0 3.5 2222 383 10244
0.27 8.5 ×18.0 ×26.0 4.8 2222 383 10274
0.3 2222 383 10304
0.33 2222 383 10334
0.36 10.0 ×19.5 ×26.0 6.0 2222 383 10364
0.39 2222 383 10394
0.43 2222 383 10434
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.47
11.0 ×21.0 ×31.0 8.4
2222 383 10474
0.51 2222 383 10514
0.56 2222 383 10564
0.62 2222 383 10624
0.68 13.0 ×23.0 ×31.0 11.0 2222 383 10684
0.75 2222 383 10754
0.82 2222 383 10824
0.91 15.0 ×25.0 ×31.0 13.6 2222 383 10914
12222 383 10105
1.1 2222 383 10115
1.2 18.0 ×28.0 ×31.0 18.5 2222 383 10125
1.3 2222 383 10135
1.5 2222 383 10155
2001 Jun 22 13
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.15 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC ):
C≤0.056 µF700 V/µs
0.056 µF<C≤0.15 µF 1400 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 50 pC peak discharge >250 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 1000 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 20... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 21... on request
lt=25.0 ±2.0 mm ±5% 2222 383 24... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 22... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±5% 2222 383 23... preferred
296x12(full_width)
CBA750
b
Ødt
l
P
h
lt
l
hh'
b
Ødt
H
F
10
F' (1)
15
Fig.8 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
2001 Jun 22 14
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =630 V; URac =220 V; Up-p =630 V
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIA METER =500 mm
lt=3.5 ±0.3 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.03 5.0 ×11.0 (13.0) ×17.5 1.2 2222 383 20303 .. 23303
0.033 2222 383 20333 .. 23333
0.036 2222 383 20363 .. 23363
0.039
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 20393 .. 23393
0.043 2222 383 20433 .. 23433
0.047 2222 383 20473 .. 23473
0.051 2222 383 20513 .. 23513
0.056 2222 383 20563 .. 23563
0.062 7.0 ×13.5 (15.5) ×17.5 2.0 2222 383 20623 .. 23623
0.068 2222 383 20683 .. 23683
0.075 2222 383 20753 .. 23753
0.082
8.5 ×15.0 (17.0) ×17.5 2.7
2222 383 20823 .. 23823
0.091 2222 383 20913 .. 23913
0.1 2222 383 20104 .. 23104
0.11 2222 383 20114 .. 23114
0.12 10.0 ×16.5 (18.5) ×17.5 3.3 2222 383 20124 .. 23124
0.13 2222 383 20134 .. 23134
0.15 2222 383 20154 .. 23154
2001 Jun 22 15
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
0.15 µF<C≤0.22 µF≤8×10−4≤25 ×10−4
0.22 µF<C≤0.3 µF≤8×10−4≤30 ×10−4
0.3 µF<C≤0.47 µF≤10 ×10−4≤40 ×10−4
0.47 µF<C≤0.68 µF≤10 ×10−4≤45 ×10−4
0.68 µF<C≤1.0 µF≤10 ×10−4≤50 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC ):
P=22.5 mm 470 V/µs
P=27.5 mm, for 0.3 µF<C≤0.75 µF 300 V/µs
P=27.5 mm, for 0.75 µF<C≤1µF 210 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 50 pC peak discharge >250 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 1000 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 20... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 21... on request
lt=25.0 ±2.0 mm ±5% 2222 383 24... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 22... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.9 Outline.
2001 Jun 22 16
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =630 V; URac =220 V; Up-p =630 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.16
8.5 ×18.0 ×26.0 4.8
2222 383 20164
0.18 2222 383 20184
0.2 2222 383 20204
0.22 2222 383 20224
0.24 10.0 ×19.5 ×26.0 6.0 2222 383 20244
0.27 2222 383 20274
0.3 2222 383 20304
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.33
11.0 ×21.0 ×31.0 8.4
2222 383 20334
0.36 2222 383 20364
0.39 2222 383 20394
0.43 2222 383 20434
0.47 13.0 ×23.0 ×31.0 11.0 2222 383 20474
0.51 2222 383 20514
0.56 2222 383 20564
0.62 15.0 ×25.0 ×31.0 13.6 2222 383 20624
0.68 2222 383 20684
0.75 2222 383 20754
0.82 18.0 ×28.0 ×31.0 18.5 2222 383 20824
0.91 2222 383 20914
12222 383 20105
2001 Jun 22 17
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 1000 V DC capaci tors
Available 1000 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.062 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC):
C≤0.024 µF1700 V/µs
0.024 µF<C≤0.062 µF 3300 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 50 pC peak discharge >440 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 1600 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 30... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 31... on request
lt=25.0 ±2.0 mm ±5% 2222 383 34... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 32... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±5% 2222 383 33... preferred
296x12(full_width)
CBA750
b
Ødt
l
P
h
lt
l
hh'
b
Ødt
H
F
10
F' (1)
15
Fig.10 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
2001 Jun 22 18
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =1000 V; URac =350 V; Up-p =1000 V
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIA METER =500 mm
lt=3.5 ±0.3 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.0043
5.0 ×11.0 (13.0) ×17.5 1.2
2222 383 30432 .. 33432
0.0047 2222 383 30472 .. 33472
0.0051 2222 383 30512 .. 33512
0.0056 2222 383 30562 .. 33562
0.0062 2222 383 30622 .. 33622
0.0068 2222 383 30682 .. 33682
0.0075 2222 383 30752 .. 33752
0.0082 2222 383 30822 .. 33822
0.0091 2222 383 30912 .. 33912
0.010 2222 383 30103 .. 33103
0.011 2222 383 30113 .. 33113
0.012 2222 383 30123 .. 33123
0.013 2222 383 30133 .. 33133
0.015 2222 383 30153 .. 33153
0.016 2222 383 30163 .. 33163
0.018
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 30183 .. 33183
0.02 2222 383 30203 .. 33203
0.022 2222 383 30223 .. 33223
0.024 2222 383 30243 .. 33243
0.027 7.0 ×13.5 (15.5) ×17.5 2.0 2222 383 30273 .. 33273
0.03 2222 383 30303 .. 33303
0.033 2222 383 30333 .. 33333
0.036
8.5 ×15.0 (17.0) ×17.5 2.7
2222 383 30363 .. 33363
0.039 2222 383 30393 .. 33393
0.043 2222 383 30433 .. 33433
0.047 2222 383 30473 .. 33473
0.051 10.0 ×16.5 (18.5) ×17.5 3.3 2222 383 30513 .. 33513
0.056 2222 383 30563 .. 33563
0.062 2222 383 30623 .. 33623
2001 Jun 22 19
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 1000 V DC capaci tors
Available 1000 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
0.062 µF<C≤0.13 µF≤6×10−4≤20 ×10−4
0.13 µF<C≤0.22 µF≤8×10−4≤25 ×10−4
0.22 µF<C≤0.33 µF≤8×10−4≤30 ×10−4
0.33 µF<C≤0.47 µF≤8×10−4≤35 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC):
P=22.5 mm 1200 V/µs
P=27.5 mm, for 0.13 µF<C≤0.33 µF 700 V/µs
P=27.5 mm, for 0.33 µF<C≤0.47 µF 470 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 50 pC peak discharge >440 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 1600 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 30... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 31... on request
lt=25.0 ±2.0 mm ±5% 2222 383 34... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 32... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.11 Outline.
2001 Jun 22 20
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =1000 V; URac =350 V; Up-p =1000 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.068 7.0 ×16.5 ×26.0 3.5 2222 383 30683
0.075 8.5 ×18.0 ×26.0 4.8 2222 383 30753
0.082 2222 383 30823
0.091 2222 383 30913
0.1
10.0 ×19.5 ×26.0 6.0
2222 383 30104
0.11 2222 383 30114
0.12 2222 383 30124
0.13 2222 383 30134
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.15 11.0 ×21.0 ×31.0 8.4 2222 383 30154
0.16 2222 383 30164
0.18 2222 383 30184
0.2 13.0 ×23.0 ×31.0 11.0 2222 383 30204
0.22 2222 383 30224
0.24 2222 383 30244
0.27 15.0 ×25.0 ×31.0 13.6 2222 383 30274
0.3 2222 383 30304
0.33 2222 383 30334
0.36
18.0 ×28.0 ×31.0 18.5
2222 383 30364
0.39 2222 383 30394
0.43 2222 383 30434
0.47 2222 383 30474
2001 Jun 22 21
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 1400 V DC capaci tors
Available 1400 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.016 µF≤5×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1400 V (DC):
C≤0.0056 µF8000 V/µs
0.0056 µF<C≤0.016 µF 15000 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 2250 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 40... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 41... on request
lt=25.0 ±2.0 mm ±5% 2222 383 44... on request
Taped on reel H =18.5 mm; for P0=12.7 mm ±5% 2222 383 42... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; for P0=15.0 mm ±5% 2222 383 43... preferred
296x12(full_width)
CBA750
b
Ødt
l
P
h
lt
l
hh'
b
Ødt
H
F
10
F' (1)
15
Fig.12 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
2001 Jun 22 22
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =1400 V; URac =500 V; Up-p =1400 V
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIA METER =500 mm
lt=3.5 ±0.3 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.0022
5.0 ×11.0 (13.0) ×17.5 1.2
2222 383 40222 .. 43222
0.0024 2222 383 40242 .. 43242
0.0027 2222 383 40272 .. 43272
0.003 2222 383 40302 .. 43302
0.0033 2222 383 40332 .. 43332
0.0036 2222 383 40362 .. 43362
0.0039 2222 383 40392 .. 43392
0.0043
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 40432 .. 43432
0.0047 2222 383 40472 .. 43472
0.0051 2222 383 40512 .. 43512
0.0056 2222 383 40562 .. 43562
0.0062
7.0 ×13.5 (15.5) ×17.5 2.0
2222 383 40622 .. 43622
0.0068 2222 383 40682 .. 43682
0.0075 2222 383 40752 .. 43752
0.0082 2222 383 40822 .. 43822
0.0091
8.5 ×15.0 (17.0) ×17.5 2.7
2222 383 40912 .. 43912
0.01 2222 383 40103 .. 43103
0.011 2222 383 40113 .. 43113
0.012 2222 383 40123 .. 43123
0.013 10.0 ×16.5 (18.5) ×17.5 3.3 2222 383 40133 .. 43133
0.015 2222 383 40153 .. 43153
0.016 2222 383 40163 .. 43163
2001 Jun 22 23
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 7.5 mm (bent back leads)
Specific reference data for the 1400 V DC capaci tors
Available 1400 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.016 µF≤5×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1400 V (DC):
C≤0.0056 µF8000 V/µs
0.0056 µF<C≤0.0082 µF 15000 V/µs
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 2250 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Taped on reel
(ben t b a ck )
H=16.0 mm; for P0=15.0 mm;
reel diameter =356 mm
for hot asphalt encapsulation ±5% 2222 383 46... on request
Fig.13 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
296x12(full_width)
CBB119
b
Ødt
l
hh'
H
F
10
F' (1)
15
2001 Jun 22 24
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =1400 V; URac =500 V; Up-p =1400 V (for hot asphalt encapsulation)
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
REEL DIAMETER =356 mm
H=16.0 mm; P0=15.0 mm
C-tol =±5%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.0022
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 46222
0.0024 2222 383 46242
0.0027 2222 383 46272
0.003 2222 383 46302
0.0033 2222 383 46332
0.0036 2222 383 46362
0.0039 2222 383 46392
0.0043
7.0 ×13.5 (15.5) ×17.5 2.0
2222 383 46432
0.0047 2222 383 46472
0.0051 2222 383 46512
0.0056 2222 383 46562
0.0062 2222 383 46622
0.0068 2222 383 46682
0.0075 2222 383 46752
0.0082 2222 383 46822
2001 Jun 22 25
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 1400 V DC capaci tors
Available 1400 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
0.016 µF<C≤0.039 µF≤5×10−4≤15 ×10−4
0.039 µF<C≤0.13 µF≤5×10−4≤20 ×10−4
Rated voltage pulse slope (dU/dt)R at 1400 V (DC):
P=22.5 mm 4000 V/µs
P=27.5 mm, for 0.039 µF<C≤0.1 µF 2100 V/µs
P=27.5 mm, for 0.1 µF<C≤0.13 µF 1500 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 2250 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 40... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 41... on request
lt=25.0 ±2.0 mm ±5% 2222 383 44... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 42... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.14 Outline.
2001 Jun 22 26
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =1400 V; URac =500 V; Up-p =1400 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.018 7.0 ×16.5 ×26.0 3.5 2222 383 40183
0.02 2222 383 40203
0.022 8.5 ×18.0 ×26.0 4.8 2222 383 40223
0.024 2222 383 40243
0.027 2222 383 40273
0.03
10.0 ×19.5 ×26.0 6.0
2222 383 40303
0.033 2222 383 40333
0.036 2222 383 40363
0.039 2222 383 40393
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.043
11.0 ×21.0 ×31.0 8.4
2222 383 40433
0.047 2222 383 40473
0.051 2222 383 40513
0.056 2222 383 40563
0.062 13.0 ×23.0 ×31.0 11.0 2222 383 40623
0.068 2222 383 40683
0.075 2222 383 40753
0.082 15.0 ×25.0 ×31.0 13.6 2222 383 40823
0.091 2222 383 40913
0.1 2222 383 40104
0.11 18.0 ×28.0 ×31.0 11.0 2222 383 40114
0.12 2222 383 40124
0.13 2222 383 40134
2001 Jun 22 27
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leadss)
Specific reference data for the 1600 V DC capaci tors
Available 1600 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.015 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC):
C≤0.0056 µF8000 V/µs
0.0056 µF<C≤0.015 µF 15000 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >660 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 50... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 51... on request
lt=25.0 ±2.0 mm ±5% 2222 383 54... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 52... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±5% 2222 383 53... preferred
296x12(full_width)
CBA750
b
Ødt
l
P
h
lt
l
hh'
b
Ødt
H
F
10
F' (1)
15
Fig.15 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
2001 Jun 22 28
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =1600 V; URac =550 V; Up-p =1600 V
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIA METER =500 mm
lt=3.5 ±0.3 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.0027
5.0 ×11.0 (13.0) ×17.5 1.2
2222 383 50272 .. 53272
0.003 2222 383 50302 .. 53302
0.0033 2222 383 50332 .. 53332
0.0036 2222 383 50362 .. 53362
0.0039 2222 383 50392 .. 53392
0.0043
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 50432 .. 53432
0.0047 2222 383 50472 .. 53472
0.0051 2222 383 50512 .. 53512
0.0056 2222 383 50562 .. 53562
0.0062 7.0 ×13.5 (15.5) ×17.5 2.0 2222 383 50622 .. 53622
0.0068 2222 383 50682 .. 53682
0.0075 2222 383 50752 .. 53752
0.0082
8.5 ×15.0 (17.0) ×17.5 2.7
2222 383 50822 .. 53822
0.0091 2222 383 50912 .. 53912
0.01 2222 383 50103 .. 53103
0.011 2222 383 50113 .. 53113
0.012 10.0 ×16.5 (18.5) ×17.5 3.3 2222 383 50123 .. 53123
0.013 2222 383 50133 .. 53133
0.015 2222 383 50153 .. 53153
2001 Jun 22 29
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 7.5 mm (bent back leads)
Specific reference data for the 1600 V DC capacitors (for hot asphalt encapsulation)
Available 1600 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.015 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC):
C≤0.0056 µF8000 V/µs
0.0056 µF<C≤0.0075 µF 15000 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >660 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Taped on reel
(ben t b a ck )
H = 16.0 mm; P0= 15.0 mm;
reel diameter = 356 mm
for hot asphalt encapsulation ±5% 2222 383 56... on request
Fig.16 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
296x12(full_width)
CBB119
b
Ødt
l
hh'
H
F
10
F' (1)
15
2001 Jun 22 30
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =1600 V; URac =550 V; Up-p =1600 V (for hot asphalt encapsulation)
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
REEL DIAMETER =356 mm
H=16.0 mm; Po=15.0 mm
C-tol =±5%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.0027
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 56272
0.003 2222 383 56302
0.0033 2222 383 56332
0.0036 2222 383 56362
0.0039 2222 383 56392
0.0043
7.0 ×13.5 (15.5) ×17.5 2.0
2222 383 56432
0.0047 2222 383 56472
0.0051 2222 383 56512
0.0056 2222 383 56562
0.0062 2222 383 56622
0.0068 2222 383 56682
0.0075 2222 383 56752
2001 Jun 22 31
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 1600 V DC capaci tors
Available 1600 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
0.015 µF<C≤0.15 µF≤5×10−4≤20 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC):
P=22.5 mm 3100 V/µs
P=27.5 mm, for 0.039 µF<C≤0.1 µF 1800 V/µs
P=27.5 mm; for 0.1 µF<C≤0.15 µF 1200 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >660 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 50... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 51... on request
lt=25.0 ±2.0 mm ±5% 2222 383 54... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 52... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.17 Outline.
2001 Jun 22 32
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =1600 V; URac =550 V; Up-p =1600 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.016 7.0 ×16.5 ×26.0 3.5 2222 383 50163
0.018 2222 383 50183
0.02 2222 383 50203
0.022
8.5 ×18.0 ×26.0 4.8
2222 383 50223
0.024 2222 383 50243
0.027 2222 383 50273
0.03 2222 383 50303
0.033 10.0 ×19.5 ×26.0 6.0 2222 383 50333
0.036 2222 383 50363
0.039 2222 383 50393
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.043
11.0 ×21.0 ×31.0 8.4
2222 383 50433
0.047 2222 383 50473
0.051 2222 383 50513
0.056 2222 383 50563
0.062 13.0 ×23.0 ×31.0 11.0 2222 383 50623
0.068 2222 383 50683
0.075 2222 383 50753
0.082 15.0 ×25.0 ×31.0 13.6 2222 383 50823
0.091 2222 383 50913
0.1 2222 383 50104
0.11
18.0 ×28.0 ×31.0 18.5
2222 383 50114
0.12 2222 383 50124
0.13 2222 383 50134
0.15 2222 383 50154
2001 Jun 22 33
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 2000 V DC capaci tors
Available 2000 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.01 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC):
C≤0.0036 µF 11000 V/µs
0.0036 µF<C≤0.01 µF 20000 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >750 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 60... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 61... on request
lt=25.0 ±2.0 mm ±5% 2222 383 64... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 62... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±5% 2222 383 63... preferred
296x12(full_width)
CBA750
b
Ødt
l
P
h
lt
l
hh'
b
Ødt
H
F
10
F' (1)
15
Fig.18 Outline.
Dimensions in mm .
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
2001 Jun 22 34
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =2000 V; URac =700 V; Up-p =2000 V
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIA METER =500 mm
lt=3.5 ±0.3 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.001
5.0 ×11.0 (13.0) ×17.5 1.2
2222 383 60102 .. 63102
0.0011 2222 383 60112 .. 63112
0.0012 2222 383 60122 .. 63122
0.0013 2222 383 60132 .. 63132
0.0015 2222 383 60152 .. 63152
0.0016 2222 383 60162 .. 63162
0.0018 2222 383 60182 .. 63182
0.002 2222 383 60202 .. 63202
0.0022 2222 383 60222 .. 63222
0.0024 2222 383 60242 .. 63242
0.0027
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 60272 .. 63272
0.003 2222 383 60302 .. 63302
0.0033 2222 383 60332 .. 63332
0.0036 2222 383 60362 .. 63362
0.0039 7.0 ×13.5 (15.5) ×17.5 2.0 2222 383 60392 .. 63392
0.0043 2222 383 60432 .. 63432
0.0047 2222 383 60472 .. 63472
0.0051
8.5 ×15.0 (17.0) ×17.5 2.7
2222 383 60512 .. 63512
0.0056 2222 383 60562 .. 63562
0.0062 2222 383 60622 .. 63622
0.0068 2222 383 60682 .. 63682
0.0075
10.0 ×16.5 (18.5) ×17.5 3.3
2222 383 60752 .. 63752
0.0082 2222 383 60822 .. 63822
0.0091 2222 383 60912 .. 63912
0.01 2222 383 60103 .. 63103
2001 Jun 22 35
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 7.5 mm (bent back leads)
Specific reference data for the 2000 V DC capacitors (for hot asphalt encapsulation)
Available 2000 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.01 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC):
C≤0.0036 µF 11000 V/µs
0.0036 µF<C≤0.0047 µF 20000 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >750 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Taped on reel
(ben t b a ck )
H = 16.0 mm; P0= 15.0 mm;
reel diameter = 356 mm
for hot asphalt encapsulation ±5% 2222 383 66... on request
Fig.19 Outline.
(1) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
296x12(full_width)
CBB119
b
Ødt
l
hh'
H
F
10
F' (1)
15
2001 Jun 22 36
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =2000 V; URac =700 V; Up-p =2000 V (for hot asphalt encapsulation)
Note
1. Dimensions in bracket s for bent back leads.
C
(µF)
DIMENSIONS(1)
b×h(h’)×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
REEL DIAMETER =356 mm;
H=16.0 mm; Po=15.0 mm
C-tol =±5%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.001
6.0 ×12.0 (14.0) ×17.5 1.5
2222 383 66102
0.0011 2222 383 66112
0.0012 2222 383 66122
0.0013 2222 383 66132
0.0015 2222 383 66152
0.0016 2222 383 66162
0.0018 2222 383 66182
0.002 2222 383 66202
0.0022 2222 383 66222
0.0024 2222 383 66242
0.0027
7.0 ×13.5 (15.5) ×17.5 2.0
2222 383 66272
0.003 2222 383 66302
0.0033 2222 383 66332
0.0036 2222 383 66362
0.0039 2222 383 66392
0.0043 2222 383 66432
0.0047 2222 383 66472
2001 Jun 22 37
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 2000 V DC capaci tors
Available 2000 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
0.01 µF<C≤0.1 µF≤5×10−4≤18 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC):
P=22.5 mm 4400 V/µs
P=27.5 mm, for 0.024 µF<C≤0.068 µF 2500 V/µs
P=27.5 mm, for 0.068 µF<C≤0.1 µF 1800 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >750 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 60... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 61... on request
lt=25.0 ±2.0 mm ±5% 2222 383 64... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 62... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.20 Outline.
2001 Jun 22 38
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =2000 V; URac =700 V; Up-p =2000 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.011 7.0 ×16.5 ×26.0 3.5 2222 383 60113
0.012 2222 383 60123
0.013 2222 383 60133
0.015 8.5 ×18.0 ×26.0 4.8 2222 383 60153
0.016 2222 383 60163
0.018 2222 383 60183
0.02 10.0 ×19.5 ×26.0 6.0 2222 383 60203
0.022 2222 383 60223
0.024 2222 383 60243
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.027
11.0 ×21.0 ×31.0 8.4
2222 383 60273
0.03 2222 383 60303
0.033 2222 383 60333
0.036 2222 383 60363
0.039 2222 383 60393
0.043 13.0 ×23.0 ×31.0 11.0 2222 383 60433
0.047 2222 383 60473
0.051 2222 383 60513
0.056 15.0 ×25.0 ×31.0 13.6 2222 383 60563
0.062 2222 383 60623
0.068 2222 383 60683
0.075
18.0 ×28.0 ×31.0 18.5
2222 383 60753
0.082 2222 383 60823
0.091 2222 383 60913
0.1 2222 383 60104
2001 Jun 22 39
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 22.5 mm
Specific reference data for the 2500 V DC capaci tors
Available 2500 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.015 µF≤5×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 2500 V (DC) 13000 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >1000 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 3500 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 70... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 71... on request
lt=25.0 ±2.0 mm ±5% 2222 383 74... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±5% 2222 383 72... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.21 Outline.
2001 Jun 22 40
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =2500 V; URac =900 V; Up-p =2500 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.001
6.0 ×15.5 ×26.0 3.0
2222 383 70102
0.0011 2222 383 70112
0.0012 2222 383 70122
0.0013 2222 383 70132
0.0015 2222 383 70152
0.0016 2222 383 70162
0.0018 2222 383 70182
0.002 2222 383 70202
0.0022 2222 383 70222
0.0024 2222 383 70242
0.0027 2222 383 70272
0.003 2222 383 70302
0.0033 2222 383 70332
0.0036 2222 383 70362
0.0039 2222 383 70392
0.0043 2222 383 70432
0.0047 2222 383 70472
0.0051 2222 383 70512
0.0056 2222 383 70562
0.0062 7.0 ×16.5 ×26.0 3.5 2222 383 70622
0.0068 2222 383 70682
0.0075 2222 383 70752
0.0082
8.5 ×18.0 ×26.0 4.8
2222 383 70822
0.0091 2222 383 70912
0.01 2222 383 70103
0.011 2222 383 70113
0.012 10.0 ×19.5 ×26.0 6.0 2222 383 70123
0.013 2222 383 70133
0.015 2222 383 70153
2001 Jun 22 41
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MMKP 383 GENERAL DATA PITCH 27.5 mm
Specific reference data for the 2500 V DC capaci tors
Available 2500 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
0.015 µF<C≤0.056 µF≤5×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 2500 V (DC):
P=27.5 mm, for 0.015 µF<C≤0.043 µF 6000 V/µs
P=27.5 mm, for 0.043 µF<C≤0.056 µF 4200 V/µs
R between leads, for C ≤1µF at 500 V; 1 minute >100000 MΩ
R between leads and case; 500 V; 1 minute >30000 MΩ
Ionization (AC) vo ltag e (typic al value) at 20 pC peak discharge >1000 V
Withstanding (DC) voltage (cut off current 10 mA) ; rise time 100 V/s 3500 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=3.5 ±0.3 mm ±5% 2222 383 70... preferred
lt=5.0 ±1.0 mm ±5% 2222 383 71... on request
lt=25.0 ±2.0 mm ±5% 2222 383 74... on request
296x12(full_width)
CBA237
l b
PØdt
h
lt
Fig.22 Outline.
2001 Jun 22 42
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
URdc =2500 V; URac =900 V; Up-p =2500 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.3 mm
C-tol =±5%
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.016 9.0 ×19.0 ×31.0 6.0 2222 383 70163
0.018
11.0 ×21.0 ×31.0 8.4
2222 383 70183
0.02 2222 383 70203
0.022 2222 383 70223
0.024 2222 383 70243
0.027 13.0 ×23.0 ×31.0 11.0 2222 383 70273
0.03 2222 383 70303
0.033 2222 383 70333
0.036 15.0 ×25.0 ×31.0 13.6 2222 383 70363
0.039 2222 383 70393
0.043 2222 383 70433
0.047 18.0 ×28.0 ×31.0 18.5 2222 383 70473
0.051 2222 383 70513
0.056 2222 383 70563
2001 Jun 22 43
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
CONSTRUCTION
Description
•Low-inductive wound cell of double sided metallized polyester carrier film and polypropylene (PP) film, potted with
epoxy resin in a flame-ret arda nt polypropyl ene case
•Radial leads, solder-c o a ted
•Small stand-off pips allow remo val of solder flux etc. during cl eaning of the printed-c irc uit board.
144x12(halfpage) 1 section
double sided metallized
polyester carrier film
polypropylene film
metal spray layer
connecting wire CBA488
Fig.23 Construction: 250-400-630 V versions.
144x12(halfpage) 2 sections
double sided metallized
polyester carrier film
metallized polypropylene
film
metal spray layer
connecting wire CBA489
polypropylene film
Fig.24 Construction: 1000 V-1400 V versions.
144x12(halfpage)
3 sections
double sided metallized
polyester carrier film
metal spray layer
connecting wire
CBA490
polypropylene film
Fig.25 Construction: 1600 V-2000 V versions.
144x12(halfpage)
4 sections
double sided metallized
polyester carrier film
metal spray layer
connecting wire
CBA491
polypropylene film
metallized polypropylene
film
Fig.26 Construction: 2500 V version.
2001 Jun 22 44
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Mounting
NORMAL USE
The capacitors are designed for mounting on printed-circuit
boards. The capacitors packed in bandoliers are designed
for mounting on printed-circuit boards by means of
automatic insertion machines.
For detailed tape specifications refer to this handbook,
chapter “Packaging information”.
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
In order to withstand vibration and shock tests, it must be
ensured that the stand-off pips are in good contact with the
printed-circuit board:
•For original pitch = 15 mm the capacitor s shall be
mechanically fixed by the leads.
•For larger pitches the capacitors shall be mounted in the
same way and the bod y clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
The maximum length and width of film capacitors is shown
in Fig.27:
•Eccentrici ty as in Fig.27. The maximum eccentricity is
smaller than or equal to the lead diameter of the product
concerned.
•Product height with seating plane as given by
“IEC 60717” as reference: hmax ≤h+0.3 mm.
144x12(halfpage)
CBA116
eccentricity
lmax = l + 0.3 mm
bmax = b + 0.3 mm
Fig.27 Lay-out.
Storage temperature
•Storage temperature: Tstg =−25 to +40 °C with RH
maximum 80% without conden sation.
RATINGS AND C HARACTERISTICS REFERENCE
CONDITIONS
Unless otherwise specified, all electrical values apply at an
ambient free air temperat ure of 23 ±1°C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 ±2%.
For reference testing, a conditioning period shall be applied
over 96 ±4 hours by heating the products in a circulating air
oven at the rated temperat ure and a rela tive hum idity not
exceeding 20%.
2001 Jun 22 45
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
CHARACTERISTICS
Capacitance
Impedance
296x12(full_width)
-60
CBB239
4
-6
-4
-2
0
2
Tamb (°C)
∆C/C
(%)
min.
max.
-40 -20 0 20 40 60 80 100
typical
Fig.28 Capacitance change at 1 kHz as a function of ambie nt tempe rat ure.
296x12(full_width) CBA648
108
107
106
105
104
102
10-3
10-2
10-1
100
101
impedance
(Ω)
frequency (Hz)
2.2 µF1.0 µF
100 nF
10 nF
1.0 nF
Fig.29 Impedance as a function of frequency: typical curves.
2001 Jun 22 46
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Maximum DC voltage as a function of temperature
296x12(full_width)
0 20 40 60 80 100
Tamb (°C)
CBA748
-60 -40 -20
1.2
1.0
0.8
0.6
0.4
0.2
0
factor
Fig.30 Multiplying factor as a function of temperature.
2001 Jun 22 47
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Maximum RMS voltage (sinewave) as a function of frequency
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBA492
103
101
102
MMKP 383
100 nF
220 nF
470 nF
1000 nF
2200 nF
Fig.31 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
106107
105
104
103
102
CBA784
103
101
102
MMKP 383
2200 nF
1000 nF
470 nF
220 nF
100 nF
Fig.32 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =250 V.
2001 Jun 22 48
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBA493
103
101
102
MMKP 383
47 nF
100 nF
220 nF
470 nF
1000 nF
Fig.33 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
106107
105
104
103
102
CBA785
103
101
102
MMKP 383
47 nF
100 nF
220 nF
470 nF
1000 nF
Fig.34 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =400 V.
2001 Jun 22 49
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBA494
103
101
102
MMKP 383
47 nF
100 nF
220 nF
470 nF
1000 nF
Fig.35 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =630 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
106107
105
104
103
102
CBA786
103
101
102
MMKP 383
1000 nF
470 nF
220 nF
100 nF
47 nF
Fig.36 AC voltage (RMS value) as a function of frequency 85 °C<Tamb ≤105 °C for URdc =630 V.
2001 Jun 22 50
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBA495
103
101
102
MMKP 383
4.7 nF
10 nF
22 nF
47 nF
100 nF
220 nF
470 nF
Fig.37 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1000 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
106107
105
104
103
102
CBA890
103
101
102
MMKP 383
470 nF
220 nF
100 nF
47 nF
22 nF
10 nF
4.7 nF
Fig.38 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =1000 V.
2001 Jun 22 51
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBA496
103
101
102
MMKP 383
2.2 nF
4.7 nF
10 nF
22 nF
47 nF
100 nF
Fig.39 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1400 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
106107
105
104
103
102
CBA891
103
101
102
MMKP 383
100 nF
47 nF
22 nF
10 nF
4.7 nF
2.2 nF
Fig.40 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =1400 V.
2001 Jun 22 52
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBA497
103
101
102
MMKP 383
4.7 nF
10 nF
22 nF
47 nF
100 nF
Fig.41 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1600 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
106107
105
104
103
102
CBA892
103
101
102
MMKP 383
100 nF
47 nF
22 nF
10 nF
4.7 nF
Fig.42 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =1600 V.
2001 Jun 22 53
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBA498
103
101
102
MMKP 383
1.0 nF
2.2 nF
4.7 nF
10 nF
22 nF
47 nF
100 nF
Fig.43 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2000 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
106107
105
104
103
102
CBA893
103
101
102
MMKP 383
100 nF
47 nF
22 nF
10 nF
4.7 nF
2.2 nF
1.0 nF
Fig.44 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =2000 V.
2001 Jun 22 54
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Maximum RMS current (sinewave) as a function of frequency
The maximum RMS current is defined by .
Uac is the maximum AC voltage depending on the ambient temperature in Figs 31 to 46.
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBA499
103
101
102
MMKP 383
1.0 nF
2.2 nF
4.7 nF
22 nF
47 nF
10 nF
Fig.45 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2500 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
106107
105
104
103
102
CBA894
103
101
102
MMKP 383
47 nF
22 nF
10 nF
2.2 nF
4.7 nF
1.0 nF
Fig.46 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =2500 V.
Iac ωCU
ac
××=
2001 Jun 22 55
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Tangent of loss angle
296x12(full_width)
f (Hz)
dissipation
factor
(x 10-4)
CBA895
106
105
104
103
102
103
100
101
102
1
2
3
4
5
8
7
6
12
13
14
15
16
11
10
9
17
18
19
20
Fig.47 Tangent of loss angle as a function of frequency; typical curves.
250 V:
C≤0.091 µF, curve 8.
C≤0.15 µF, curve 9.
C≤0.22 µF, curve 10.
C≤0.27 µF, curve 11.
C≤0.33 µF, curve 12.
C≤0.56 µF, curve 15.
C≤0.82 µF, curve 16.
C≤1.2 µF, curve 18.
C≤1.6 µF, curve 19.
C≤2.2 µF, curve 20.
400 V:
C≤0.047 µF, curve 5.
C≤0.068 µF, curve 6.
C≤0.1 µF, curve 7.
C≤0.2 µF, curve 8.
C≤0.24 µF, curve 12.
C≤0.36 µF, curve 13.
C≤0.43 µF, curve 14.
C≤0.56 µF, curve 16.
C≤1.1 µF, curve 17.
630 V:
C≤0.033 µF, curve 4.
C≤0.068 µF, curve 5.
C≤0.1 µF, curve 6.
C≤0.15 µF, curve 7.
C≤0.22 µF, curve 11.
C≤0.27 µF, curve 12.
C≤0.47 µF, curve 15.
C≤0.68 µF, curve 16.
1000 V:
C≤0.01 µF, curve 2.
C≤0.027 µF, curve 3.
C≤0.047 µF, curve 4.
C≤0.062 µF, curve 5.
C≤0.075 µF, curve 6.
C≤0.1 µF, curve 7.
C≤0.15 µF, curve 8.
C≤0.22 µF, curve 9.
C≤0.3 µF, curve 10.
C≤0.39 µF, curve 11.
C≤0.47 µF, curve 12.
1400 V:
C≤0.0047 µF, curve 1.
C≤0.016 µF, curve 2.
C≤0.033 µF, curve 3.
C≤0.051 µF, curve 4.
C≤0.068 µF, curve 5.
C≤0.082 µF, curve 6.
C≤0.1 µF, curve 7.
1600 V:
C≤0.0047 µF, curve 3.
C≤0.0091 µF, curve 4.
C≤0.068 µF, curve 5.
C≤0.01 µF, curve 6
C≤0.15 µF, curve 7.
2000 V:
C≤0.0047 µF, curve 2.
C≤0.033 µF, curve 3.
C≤0.1 µF, curve 4.
2500 V:
C≤0.0047 µF, curve 1.
C≤0.015 µF, curve 2.
C≤0.056 µF, curve 3.
2001 Jun 22 56
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Insulation resistance
Maximum allowed component temperature rise (DT) as a function of the ambient temperature (Tamb)
296x12(full_width) CBA647
0 20 40 60 80 100
106
104
105
RC
(s)
Tamb (°C)
Fig.48 RC product as a function of ambient temperature: typical curve.
296x12(full_width)
0 20 40 60 80 100
Tamb (°C)
CBA757
-60 -40 -20
12
10
8
6
4
2
0
∆T
(°C)
Fig.49 Maximum allo wed compone nt temper atur e rise as a function of the ambient tempera ture .
2001 Jun 22 57
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/×C
Tab le 1 He at conductivity
Power dissipation and maximum component tem perature rise
The power dissipation must be limited in order not to exceed the maximum al lowe d component temperature rise as a
function of the free air ambient temperature.
The power dissipation can be calculated according Type detail specification “HQN-384-01/001”, with th e typical tan δ of
the curves in Fig.47.
The component temperat ure ri se (∆T) can be measure d (see section “M easuring the component temper at ure” for more
details) or calculated by
•∆T=component temperature rise (°C).
•P=power dissipation of the component (mW).
•G=heat conductivity of the component (mW/°C).
bmax (mm)
ORIGINAL PITCH
(mm)
15 22.5 27.5
4.0 −−−
5.0 10 −−
6.0 11 19 −
7.0 12 21 −
8.5 16 25 −
10.0 18 28 −
11.0 −−36
13.0 −−42
15.0 −−48
18.0 −−57
∆TPG⁄=
2001 Jun 22 58
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Measuring the component temperature
A thermocouple must be attach ed to the capacitor body; see Fig.50 .
The temperature is measured in unloaded (Tamb) and maximum loaded condition
(Tc).
The temperature rise is given by .
To avoid radiation or convection, the capacitor should be tested in a wind-free
box.
144x12(halfpage) thermocouple
CBA758
Fig.50 Mounting the thermocouple.
∆TT
cTamb
–=
2001 Jun 22 59
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Application note and limiting conditions
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as
described hereunder. These mains applicati ons are strictly regulate d in safety standards and therefore electrom agne tic
interference suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be che cked :
1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).
2. The peak-to-pe ak vol ta ge (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation incept ion level.
3. The voltage pulse slope (dU/dt) shall not exc eed the rated voltage pul se slope in an RC-ci rcuit at rated vo ltage and
without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied
by URdc and divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T is the pulse duration.
4. The maximum component surface temperature rise must be lower than the limits in Fig.49.
5. Since in circuits u sed at voltag es over 280 V peak-to-peak the risk for an intrinsic ally act i ve flam mabi lit y after a
capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to
100 times the val ues me ntioned in Table 1 “Heat conductivity”.
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected
with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes
and surge voltages from the mains included).
VOLTAGE CONDITIONS FOR 6 ABOVE
ALLOWED VOLTAGES T amb ≤85 °C85°C<Tamb ≤105 °C
Maximum continuous RMS voltage URac URac
Maximum te mporary R MS -overvoltage (<24 hours) 1.25 ×URac 1.25 ×URac
Maximum peak voltage (Vo-p) (<2s) 1.6×URdc 1.1 ×URdc
2dU
dt
--------
2
0
T
∫dt×× URdc dU
dt
--------
rated
×<
2001 Jun 22 60
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Example
C=4 n7 - 1600 V used for the voltage signal shown in Fig.51.
Up-p =1000 V ; Up=900 V; T1=12 µs; T2=64 µs; T3=4µs
The ambient temperature is 80 °C. In case of failure, the osci llation is blo c ke d .
Checking the conditions:
1. The peak voltage Up= 900 V is lower than 1600 V (DC).
2. The peak-to-pe ak vol ta ge 1000 V is lower than .
3. The voltage pulse slope dU/dt =1000 V/4 µs=250 V/ µs.
This is lower than 8000 V/µs (see specific refer ence data for each version).
4. The dissipated power is 35 mW as calculated with Fourier terms and typical tangent of loss angle.
The temperature rise for bmax =6.0 and pitch =15 mm will b e .
This is lower than 10 °C temperatur e rise at 80 °C; see Fig.49.
5. Oscillation is blocked.
6. Not applicable.
2 2 550 VAC()×× 1600 Upp–
=
35 mW
11 mW °C⁄
------------------------------- 3.2 °C=
296x12(full_width)
T2
T1
Up
time
Up-p
voltage
T3
CBA329
Fig.51 Voltage signal.
2001 Jun 22 61
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
MARKING
Product marking
The capacitors are marked on the top for original
pitch ≥22.5 mm (see Fig.53) or on the top and one side for
original pitch = 15 m m (see Fig.52), with the following
information:
1. Rated capaci ta nce code in accorda nce w ith
“IEC 60062”
2. Tolerance on rated capacitanc e: J = ±5%
3. Rated (DC) voltage (e.g. 1000 V)
4. Code for dielectric material (MMKP)
5. Code for factory of origin (HQ)
6. Manufacturer’s type designation (383)
7. Manufacturer
8. Year and week of manufacture (e.g. 0001).
144x12(halfpage)
CBB065
HEAD FACE FRONT FACE
33 n J 1000V
383 MMKP BC
HQ0001
Fig.52 Example of ma rki ng for a capa citor w ith
original pitch =15 mm.
144x12(halfpage)
CBB066
HEAD FACE
15 n J 2000V BC
383 MMKP HQ0001
Fig.53 Example of ma rki ng for a capa citor w ith
original pitch =22.5 or 27.5 mm.
2001 Jun 22 62
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Package marking
The package containi ng the capa citors is marked as shown in Fig.54.
Fig.54 Barcode label.
Barcode label marking
LINE MARKING EXPLANATION
1 Manufacturer’s name
2 Country of origin
3Sub-family
4 Type description
5 Capacitance value in µF, tolerance, voltage
and climatic category (“IEC 60068-1”)
6−
7 Preference origin code: A
Country of origin in code: 170 (Belgium)
Responsible production centre: HQ
WO: work order
8 Product type description
9 Quantity and production period, year and
week code
10 Produ ct code (12NC)
2001 Jun 22 63
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
QUICK REFERENCE TEST REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
Robustness of leads
Tensile strength:
“IEC 60068-2-21”load 10 N; 10 s no visible damage
legible marking
∆C/C≤1%
∆tan δ≤5×10−4 (C ≤100 nF)
∆tan δ≤10 ×10−4 (100 nF <C≤470 nF)
∆tan δ≤15 ×10−4 (C >470 nF)
Bending:
“IEC 60068-2-21”load 5 N; 4 ×90 °
Resistance to soldering heat:
“IEC 60068-2-20”solder bath: 260 °C; 10 s
Component solvent
resistance isopropyl alcohol; 23 °C; 5 minutes
Robustness of component
Vibration:
“IEC 60068-2-6”10 Hz to 55 Hz; amplitude
0.75 mm or acce leration 98 m/s2;
6 hours
∆C/C≤1%
∆tan δ≤5×10−4 (C ≤100 nF)
∆tan δ≤10 ×10−4 (100 nF <C≤470 nF)
∆tan δ≤15 ×10−4 (C >470 nF)
Shock:
“IEC 60068-2-27”half sinewave; 490 m/s2; 11 ms
Climatic sequenc e
Dry heat:
“IEC 60068-2-2”16 hours; +105 °C
∆C/C≤2% (original pitch =22.5 or 27.5 mm)
∆C/C≤3% (original pitch =15 mm)
∆tan δ≤5×10−4 (C ≤100 nF)
∆tan δ≤10 ×10−4 (100 nF <C≤470 nF)
∆tan δ≤15 ×10−4 (C >470 nF)
Rins ≥50% of specified value
Damp heat, cyclic, test Db,
first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”2 hours; −55 °C
Damp heat, cyclic, test Db,
remaining cycles:
“IEC 60068-2-30”
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”56 days; 40 °C; 90 to 95% R H ∆C/C≤1%
∆tan δ≤5×10−4 (C ≤100 nF)
∆tan δ≤10 ×10−4 (100 nF <C≤470 nF)
∆tan δ≤15 ×10−4 (C >470 nF)
Rins ≥50% of specified value
Endurance (AC):
“IEC 60384-17”2000 hours;
1.25 ×URac (RMS); 50 Hz; 105 °C∆C/C≤5%
∆tan δ≤5×10−4 (C ≤100 nF)
∆tan δ≤10 ×10−4 (100 nF <C≤470 nF)
∆tan δ≤15 ×10−4 (C >470 nF)
Rins ≥50% of specified value
2001 Jun 22 64
BCcomponents Prod uct spec ification
AC and pulse double
metallized polypropylene film capacitors MMKP 383
Heat storage:
“IEC 60384-17”2000 hours; 105 °C∆C/C≤1% (or iginal pitch =22.5 or 27.5 mm)
∆C/C≤2% (original pitch =15 mm)
∆tan δ≤5×10−4 (C ≤100 nF)
∆tan δ≤10 ×10−4 (100 nF <C≤470 nF)
∆tan δ≤15 ×10−4 (C >470 nF)
Resistance to soldering heat
with pr eheating:
“IEC 60384-17”
body temperature: 105 °C;
bath temperature: 260 °C;
dwell time : 1 0 s
∆C/C≤1% (original pitch =22.5 or 27.5 mm)
∆C/C≤2% (original pitch =15 mm)
∆tan δ≤5×10−4 (C ≤100 nF)
∆tan δ≤10 ×10−4 (100 nF <C≤470 nF)
∆tan δ≤15 ×10−4 (C >470 nF)
Passive flam mability:
“IEC 60384-1”class B no burning
Endurance (DC):
“IEC 60384-17”2000 hours;
1.25 ×URdc; 85 °C
0.875 ×URdc; 105 °C
∆C/C≤3% for 250 V
∆C/C≤2% for 400 to 2500 V
∆tan δ≤5×10−4 (C ≤100 nF)
∆tan δ≤10 ×10−4 (100 nF <C≤470 nF)
∆tan δ≤15 ×10−4 (C >470 nF)
Rins ≥50% of specified value
W ax potting for:
2222 383 46...;
2222 383 56... and
2222 383 66... only
60 ±5 seconds at 165 ±3°C∆C/C≤2%
∆tan δ≤5×10−4 (C ≤100 nF)
Rins ≥50% of specified value
TEST PROCEDURE
(quick reference) REQUIREMENTS
