96
D.C. POWER CONTACTORS
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
www.stancor.com
Type 586 SPDT
Type 586
Engineering Design Data
Operation in % of Breakdown Voltages
Coil Rating Nom. Coil Rating All Terminals - 60 Hz RMS Contact Material Electrical Life Mechanical Life
Nominal Open Max.
Magnetic Max. Contacts Oper. Oper. Oper.
D.C. Coil Rating Safe Opposite Same To Oper. At Per Oper. At Per Amb.
Type (Watts) Pick-up Operate Polarity Polarity Ground Power Pilot Rated Load Min. No Load Min °F
586 8 - SPNO 75% 110% 500 500 500 Silver Alloy - 50,000 2 100,000 30 149
12 - SPDT
For outline drawings refer to page 97.
Temperature Range
–– -40˚F to 149˚F
Terminations
–– Contacts: 5/16"-24 UNF-2A thread
–– Coil: #10-32 UNF-2A thread
Recommended Mounting
–– Vertical plane with coil terminals up.
Hardware Torque Specification
–– Contact Terminal: 60 inch-lbs., max.
–– Coil Terminal: 12-18 inch lbs.
Type 586 Custom Design Capabilities
–– Coil voltages 6 VDC through 48 VDC
–– High vibration (consult factory)
–– Gold plated contacts for pilot duty (low load switching) applications
–– Please complete application data form on page 99 of this section.
Note:
Caution must be used in coil selection for use in 12 volt systems where
battery charging may expose coil to continuous, higher-than-rated voltage.
White-Rodgers will not be responsible for consequences of misapplied
solenoids.
–– Water Resistant
* Terminal Type: “4” = Isolated Coil
“6” = Isolated Coil
** Inrush Current: Current applied within the first 1/2 second of contact closure
Coil Contact Rating-(Amps.) DIMENSIONS
STANCOR Coil Resistance Inductive Load INCHES
PART Duty Terminal Pole Bracket Volt. (Ohms) Contact Volt. Normally Open Normally Closed Case Weight Agency
Sec. NUMBER Cycle Type* Form Style D.C. @25˚C Material D.C. Continuous Inrush** ContinuousInrush** L W H (oz.) Certif.
A 586-901 Continuous 4 SPNO Standard 6 5.3 Silver Alloy 6 200 600 - - 3.69 3.30 2.90 24.0 -
586-902 Continuous 4 SPNO Standard 12 21.0 Silver Alloy 12 200 600 - - 3.69 3.30 2.90 24.0 -
586-903 Continuous 4 SPNO Standard 15 32.8 Silver Alloy 15 200 600 - - 3.69 3.30 2.90 24.0 -
B 586-905 Continuous 4 SPNO Standard 24 84.0 Silver Alloy 24 200 600 - - 3.69 3.30 2.90 24.0 -
586-906 Continuous 4 SPNO Standard 36 189.0 Silver Alloy 36 200 600 - - 3.69 3.30 2.90 24.0 -
586-907 Continuous 4 SPNO Standard 48 336.0 Silver Alloy 36 200 600 - - 3.69 3.30 2.90 24.0 -
C 586-911 Continuous 6 SPDT Standard 12 13.2 Silver Alloy 12 200 600 100 300 4.61 3.30 2.90 26.0 -
586-914 Continuous 6 SPDT Standard 24 53.0 Silver Alloy 24 200 600 100 200 4.61 3.30 2.90 26.0 -
586-915 Continuous 6 SPDT Standard 36 120.0 Silver Alloy 36 200 600 100 200 4.61 3.30 2.90 26.0 -
Errata Sheet - replaces page 96 in printed
Stancor Product Catalog R-3982
D.C. POWER CONTACTORS
White-Rodgers • Emerson Electric Co.
9797 Reavis Road • St. Louis, MO 63123
(314) 865-8799 • Fax (314) 638-2400
www.stancor.com
2.300
3.300 W
2.300
3.300 W
Type 586
3.688
L
.281 WIDE X .600 LONG SLOT
5/16-24 UNF-2A X .594 L
O
2.797 H
#10-32 U
Terminal Type 4 – Isolated Coil
L
3.688
H
2.891
CIRCUIT DIAGRAM
2.797 H
#10-32 UNF-2A
Terminal Type 6 – Isolated Coil
H
2.891
CIRCUIT DIAGRAM
NORMALLY
CLOSED
W
3.300
2.300
#10-32 UNF-2A
X .375 LONG
#10-32 UNF-2A
X .375 LONG
NORMALLY
OPEN
.281 WIDE X .600 LONG SLOT
W
3.300
2.300
.281 WIDE X .600 LONG SLOT
4.618
L
5/16-24 UNF-
NORMALLY
OPEN
5/16-24 UNF-2A X .594 LONG
L
4.618
5/16-24 UNF-2A X .594 LONG
97
